Toro 140-2056 User guide

Type
User guide

This manual is also suitable for

Toro 140-2056 is an LED Light Kit designed for TimeCutter® Riding Mowers. It provides enhanced visibility while operating the mower in low-light conditions. The kit includes a mounting plate, LED lights, bolts, a wire harness, and cable ties for secure installation. The LED lights are energy-efficient, providing bright illumination with low power consumption.

Toro 140-2056 is an LED Light Kit designed for TimeCutter® Riding Mowers. It provides enhanced visibility while operating the mower in low-light conditions. The kit includes a mounting plate, LED lights, bolts, a wire harness, and cable ties for secure installation. The LED lights are energy-efficient, providing bright illumination with low power consumption.

FormNo.3436-450RevA
LEDLightKit
forTimeCutter
®
RidingMowers
ModelNo.140-2056
InstallationInstructions
PreparingtheMachine
1.Parkthemachineonalevelsurface.
2.Disengagetheblade-controlswitch.
3.Movethemotion-controlleversoutwardtothe
PARKposition.
4.Shutofftheengineandremovethekey.
5.Waitforallmovingpartstostopbeforeleaving
theoperatingposition.
6.Removeandretainthefootrest(Figure1and
Figure2).
g309084
Figure1
ForMyRideunits
1.Footrest
g309085
Figure2
Fornon-MyRideunits
1.Footrest
InstallingtheLights
1.Securethemountingplatetothefrontofthe
frameusing2ange-headbolts(5/16inch)as
showninFigure3.
g309096
Figure3
1.Flange-headbolt(5/16
inch)
2.Mountingplate
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3436-450*A
2.SecuretheLEDlightsthroughthebackofthe
mountingplateusing4bolts(M4)asshownin
Figure4.
g309097
Figure4
1.Bolt(M4)
2.LEDlight
3.Ifyouhaveanon-MyRidemachine,continue
tostep5.IfyouhaveamachinewithMyRide,
removethe2boltssecuringtheguardrailin
place(Figure6andFigure6).
g310000
Figure5
1.Removeandretain
g309098
Figure6
1.Guardrail
4.Connectthewireharnesstothebackofthe
lightsandsecuretheharnesstothefrontframe
railusingtheharnessclips(Figure7).
g309099
Figure7
1.Harnessclips
5.Routethewireharnessalongtherightframerail
(Figure8).
g309110
Figure8
1.Wireharness
2
6.Connectthewireharnesstothemainwire
harnessconnectorlocatedbehindthebattery
(Figure9).
g309111
Figure9
1.Kitwireharness2.Machinewireharness
7.Ifyouhaveanon-MyRidemachine,securethe
wireharnesstotheframerailusing2cableties,
andthekitwireharnesstothemachinewire
harnessusingtheremainingcabletie(Figure
10).IfyouhaveamachinewithMyRide,install
thepreviouslyremovedguardrailusingthe
previouslyremovedbolts(Figure6andFigure
4).
g309187
Figure10
1.Cableties
8.Installthepreviouslyremovedfootrest.
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Toro 140-2056 User guide

Type
User guide
This manual is also suitable for

Toro 140-2056 is an LED Light Kit designed for TimeCutter® Riding Mowers. It provides enhanced visibility while operating the mower in low-light conditions. The kit includes a mounting plate, LED lights, bolts, a wire harness, and cable ties for secure installation. The LED lights are energy-efficient, providing bright illumination with low power consumption.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI