Optimus PM-4P User manual

Optimus
Brand
Optimus
Model
PM-4P
Type
User manual
MANUAL DE INSTRUCCIONES
PM-4P Versión 2.1 1/1
PM-4P
A
TENCI
Ó
N:
⋅ La instalación debe ser realizada por personal técnico
cualificado.
⋅ Conectar en paralelo los altavoces a los terminales de
salida correspondientes del amplificador.
⋅ Asegurarse de que todos los altavoces tengan la
misma polaridad.
⋅ No cambiar la toma del transformador mientras el
altavoz está en funcionamiento.
⋅ No exponer el equipo a fuentes de calor, ni a la llama.
PREAMPLIFICADOR PARED
CARACTERÍSTICAS
Modelo PM-4P
Salida 0 dB, balanceada 600 Ω
Estradas de micro
MIC1 y MIC2 balanceadas electrónicamente
Phantom 24 V seleccionable
Entradas
auxiliares
AUX1 y AUX2, no balanceadas
Controles Volumen MIC1, MIC2, AUX1 y AUX2
Alimentación 220 ~ 240 Vca 50 Hz, 24 Vcc y phantom 24 V
Consumo 0,5 W
Dimensiones (mm) 223 x 167 x 59
Peso 0,7 kg
Acabado Caja 51000003-030
Color Blanco
PASO 1
Quite los 4 tornillos y el
circuito de la base del
PM-4P.
PASO 2
Haga 4 agujeros a la pared y
fije la caja del PM-4P con 4
tornillos.
PASO 3
Vuelva a montar el circuito del
PM-4P a su base con los 4
tornillos.
PASO 4
Finalmente monte el frontal del
PM-4P.
INSTALACIÓN
INSTRUCTION MANUAL
PM-4P Version 2.1 1/1
PM-4P
WARNING:
⋅ Installation by qualified personnel only.
⋅ Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
⋅ Ensure that all speakers have the same polarity with
respect to each other.
⋅ Do not select another tapings if the speaker is in use.
⋅ No naked flame sources, such as lighted candles,
should be placed on the apparatus.
WALL PREAMPLIFIER
SPECIFICATIONS
Model PM-4P
Output 0 dB, 600 Ω balanced
Micro inputs
MIC1 & MIC2, electronically balanced
Phantom 24 V selectable
Aux inputs AUX1 & AUX2, unbalanced
Controls Volume controls MIC1, MIC2, AUX1 & AUX2
Power supply 220 ~ 240 Vac 50 Hz, 24 Vdc & phantom 24V
Consumption 0,5 W
Dimension (mm) 223 x 167 x 59
Weight 0,7 kg
Finish 51000003-030 box
Color White
STEP 1
Remove 4 screws and
circuit from PM-4P base.
STEP 2
Drill 4 holes into the wall
and fix the PM-4P box with 4
screws.
STEP 3
Mount the PM-4P circuit to
its base with 4 screws.
STEP 4
Finally mount the PM-4P
front panel.
INSTALLATION
  • Page 1 1
  • Page 2 2

Optimus PM-4P User manual

Optimus
Brand
Optimus
Model
PM-4P
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents