JS5020K

Axis JS5020K User manual

  • Hello! I've analyzed the user manual for the Axis JS5020K 5" Monitor & Camera Kit. This document provides detailed information about the device’s features, including camera inputs, display settings, and installation instructions. It outlines the product's capabilities and also includes warranty information. I'm ready to answer any questions you have about the system.
  • What is the display size of the monitor?
    How many camera inputs are available?
    Can I adjust the image orientation?
    Is there a reverse trigger function?
1
JS5020K
5” Monitor & Camera Kit
JAPAN QUALITY
2
CONTENTS
Important Notes .................................................................................................................................................................................. 2
Keystroke Instructions ..................................................................................................................................................................... 3
Menu Operation Instruction ......................................................................................................................................................... 4
Wiring Diagram ................................................................................................................................................................................... 5
Bracket Installation ............................................................................................................................................................................ 6
Specifications ...................................................................................................................................................................................... 7
Warranty .................................................................................................................................................................................................. 8
IMPORTANT NOTES
1. Do not try to open the covers.
2. Please disconnect the power if anomolies occur.
3. Do not use organic solvents on the surfaces to avoid damage to the coating.
4. Do not apply force to the wiring leads to avoid internal damage.
5. Keep the product away from high dirt/dust enviroments, direct high temperature sun
light and high humidity conditions.
6. Install the product so that it does not fall down.
7. Follow wiring diagram strictly or warranty will be voided and can result in damage to the
vehicle’s electrical system.
8. Do not change functions while driving.
9. Comply with the operating temperature of this unit.
3
KEYSTROKE INSTRUCTION
Power
AV Input Select
- Volume & Menu DOWN Function
M MENU
+ Volume + Menu UP Function
CH1 Camera Input 1
CH2 Camera Input 2
CH3 Camera Input 3
3
5�
3 way video inputs, 2 way trigger wires
With reverse polarity protection;
Separately supply DC12V power to each camera;
AV2/AV3 with trigger wires;
(5";7";9")
Analog
screen
:
320RGB
(
H
)
x234
(
V
) (
5
.
6
")
Digital screen:800RGB(H)x480(V)
Digital screen:1024RGB(H)x600(V) (10.1")
Reversing image delay time 0~15s;
Separately adjust camera mirror/ normal image;
Multi-language
15# Remote control/Keystroke
Specifications
Audio; RCA/Aviation connector optional
Screen Size
Resolution
System
OSD MENU
Video Inputs
Brightness
Contrast
Voltage
Features
Operation Mode
Optional
PAL/NTSC/AUTO
450cd/
450:1
DC10V~36V
Function Optional
1) Remove/Nonremove sun shade optional
2) With/without light sensor optional
3) Keystroke with/without blue LED light optional
4) Headrest Shroud/ U bracket/ Metal bracket optional
Butterfly Plastic Bracket U-Bracket Metal Bracket Headrest Shroud
4
V1/V2; AV; SEL
; Power
CH
L/R
M; MENU
-;
+;
; IR
Power On
Video Switch
Guide Lines
Image Normal/Mirror
MENU
Analog Decrease
Analog Increase
IR Receiver
Light Sensor
Earphone Jack(Decorate Only)
Inaction
Analog Increase
34
10
12
13
15
79
56
2
8
1
11 14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
REMOTE CONTROL
MODE TIMER
GRID SEL
MENU
16:9
4:3
RESET
CH
CH
CH
Mute
Horizontal Mirror/Normal Image
Vertical Mirror/Normal Image
Volume Down
Volume Up
Menu
Analog Decrease
Remote Instruction
Keystroke Instruction
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
8
9
10
11
Power On
Mode
Guide Lines
16:9/4:3
Timer (0~240mins)
AV Switchover
Reset
4
5
Aviation Connector
RCA Connector
DC10V~36V(Red)
GND(Black)
Trigger Cam2(Green)
Trigger Cam3(Blue)
Cam1
Cam3
Cam2
Wiring Diagram
Aviation Female Connector Aviation Male Connector
+12V Video
GND Audio
Video +12V
Audio GND
Separately supply DC12V
power to each camera
DC10V~36V(Red)
GND(Black)
Trigger Cam2(Green)
Trigger Cam3(Blue)
Connect Cam1
Connect Cam2
Connect Cam3
Cam1 power supply
Cam2 power supply
Cam3 power supply
PRESET
SLEEP 0
SYSTEM
S-COLOR AUTO
ACC1-TIME 0
ACC2-TIME 0
ACC3-TIME 0
GUIDE LINES OFF
AUTO DIM OFF
OPTION
ROTATE
ZOOM 16:9
V1V2-3S ON
BC2-AV1 ON
VOLUME
VOLUME 50
Brightness Adjust
Contrast Adjust
Color Adjust
Language Optional
Reset
Volume
Picture Overturn Up/Down/Left/Right
Display Format 4:3/16:9
VIV2 Playback
Trigger starting up optional
PAL/NTSC/AUTO optional
Reversing image delay time 0~15S
Guide Lines Optional
Light Sensor Optional
Slumber 0~240mins
Menu Operation Instruction
PressMENU" , the screen will showPICTURE”.
Press , to select other feature. Press to adjust parameter.
PressMENUover and over again, the screen will show pictures as below
PICTURE
BRIGHT
CONTRAST
COLOR
LANGUAGE ENGLISH
RESET
50
50
50
0~100
0~100
0~100
0~100
6
MENU OPERATION INSTRUCTION
Press “MENU”, the screen will show “PICTURE”
Press “▼▲” to select other feature. Press “◄ ►” to adjust parameter.
Press “MENU” over and over again, the screen will show pictures below.
Brightness 0~100
Contrast 0~100
Colour 0~100
Reset
Volume 0~100
Language Optional
Rotate Normal/Flip/Mirror/Mirror Flip
Zoom 4:3/16:9
VIV2 - 3s Playback
BC2 - AV1 Optional
Auto Dim Optional
S - Color PAL/NTSC/AUTO
Guidleines Optional
ACC1 -Time Image Delay 0~15S
ACC2 - Time Image Delay 0~15S
ACC3 - Time Image Delay 0~15S
Sleep 0~240mins
5
WIRING DIAGRAM
6
BRACKET INSTALLATION (Included)
1. U-Bracket Installation
Fix the U-bracket into position. Insert and lock the monitor into the bracket using the mounting
gymbal knobs.
2. Adjust the angle as required.
For the sake of safety, please do not watch
the video while driving, except driving assist video!
7
Bracket Installation
Model: 2;3;4;5;6;7;8;9;10 can choose the bracket:
Headrest Frame; Plastic/Metal bracket
Model: 1;11;12;13 can choose the bracket:
Headrest Frame; Metal; U-Bracket
1. U-Bracket Installation
1) Use the screw fixed the U-bracket. Put the monitor into
the bracket, adjust angle and locking it.
2) Finished the installation. Adjust the angle forward 30°to backward 30°.
User can adjust a suitable angle by oneself.
2. Plastic/Metal Bracket Installation
1) Firstly fixed the bracket via the screws, the screws of the top need lock to
nut of under.
2) Secondly put the metal buckle piece on the top of the fan-shaped bracket
into the notch at the back of the monitor.
3) Move the bracket to the proper
location.
4) Screw down the nut of bracket,
until the monitor fastening.
For the sake of safety, please do not watch
the video while driving, except driving assist video!
7
Bracket Installation
Model: 2;3;4;5;6;7;8;9;10 can choose the bracket:
Headrest Frame; Plastic/Metal bracket
Model: 1;11;12;13 can choose the bracket:
Headrest Frame; Metal; U-Bracket
1. U-Bracket Installation
1) Use the screw fixed the U-bracket. Put the monitor into
the bracket, adjust angle and locking it.
2) Finished the installation. Adjust the angle forward 30°to backward 30°.
User can adjust a suitable angle by oneself.
2. Plastic/Metal Bracket Installation
1) Firstly fixed the bracket via the screws, the screws of the top need lock to
nut of under.
2) Secondly put the metal buckle piece on the top of the fan-shaped bracket
into the notch at the back of the monitor.
3) Move the bracket to the proper
location.
4) Screw down the nut of bracket,
until the monitor fastening.
For the sake of safety, please do not watch
the video while driving, except driving assist video!
7
Bracket Installation
Model: 2;3;4;5;6;7;8;9;10 can choose the bracket:
Headrest Frame; Plastic/Metal bracket
Model: 1;11;12;13 can choose the bracket:
Headrest Frame; Metal; U-Bracket
1. U-Bracket Installation
1) Use the screw fixed the U-bracket. Put the monitor into
the bracket, adjust angle and locking it.
2) Finished the installation. Adjust the angle forward 30°to backward 30°.
User can adjust a suitable angle by oneself.
2. Plastic/Metal Bracket Installation
1) Firstly fixed the bracket via the screws, the screws of the top need lock to
nut of under.
2) Secondly put the metal buckle piece on the top of the fan-shaped bracket
into the notch at the back of the monitor.
3) Move the bracket to the proper
location.
4) Screw down the nut of bracket,
until the monitor fastening.
For the sake of safety, please do not watch
the video while driving, except driving assist video!
7
Bracket Installation
Model: 2;3;4;5;6;7;8;9;10 can choose the bracket:
Headrest Frame; Plastic/Metal bracket
Model: 1;11;12;13 can choose the bracket:
Headrest Frame; Metal; U-Bracket
1. U-Bracket Installation
1) Use the screw fixed the U-bracket. Put the monitor into
the bracket, adjust angle and locking it.
2) Finished the installation. Adjust the angle forward 30°to backward 30°.
User can adjust a suitable angle by oneself.
2. Plastic/Metal Bracket Installation
1) Firstly fixed the bracket via the screws, the screws of the top need lock to
nut of under.
2) Secondly put the metal buckle piece on the top of the fan-shaped bracket
into the notch at the back of the monitor.
3) Move the bracket to the proper
location.
4) Screw down the nut of bracket,
until the monitor fastening.
7
SPECIFICATIONS
MONITOR
TFT Panel: New Grade A LCD
LCD Size: 5-Inch Diagonal
Display Format: 16:9
Resolution: 800 x 480
Brightness: < 450 CD/M2
Viewing Angles: 70° Left/Right/Up/Down
Video System: Auto PAL/NTSC Select
Video Connect: 3 x 4-Pin (Female)
Reverse Trigger: Yes, Each Input
Monitor View: Normal/Mirror Image Select
Buttons: Illuminated
Guidelines: Selectable On/Off
Audio: On Board Speaker
Menu: OSD
Operating Temp: -20°C to +70°C
Power Input: 12-32V DC (Negative Ground)
Dimensions: 132W x 95H x 26D mm (excluding bracket)
CAMERA
Image Sensor: 1/3” Sony CCD
Auto Lens: f2.9mm
Electronic Shutter: Auto
Vertical Viewing Angle: 120°
Horizontal Viewing Angle: 90°
Signal System: PAL
Resolution: 700 TV Lines
Sync System: Internal
Orientation: Mirror Image
Night Vision: Yes, 18 LED
Illumination: 0 Lux with IR on
Ingress Protection: IP69K
Operating Temperature: -20°C ~ 70°C
Dimensions: 70W x 45H x 60D mm (Excl Bracket)
Connection: Terminated 4-Pin Male
Power Supply: 12V DC (From Monitor)
Extention Cable: 15m 4 Pin Male to 4 Pin Female
INCLUDES
U-Shape Mount
Power Cable Assembly
Sunshade
(Optional Glass Mount Bracket BKT102)
HEAVY DUTY CAMERA
15m 4-Pin (Male) to 4-Pin (Female) Extension Cable
Mounting Bracket
Sunvisor
8
Congratulations on your purchase of a quality Mobile Safety System! You’re joining thousands of
satisfied customers who enjoy & experience the benefits of the products we distribute. In the unlikely event that
some technical difficulty arises with your purchase, be assured that we are most anxious to see that the problem is
quickly rectified to your satisfaction. Please familiarise yourself with the following simple conditions of our warranty.
This warranty covers faults through component failure or failure of the product to operate in accordance with
published specifications. Product failure as a result of unreasonable environmental conditions, accident, misuse,
improper installation, unauthorised repair, vehicle electrical or wiring faults or neglect etc, will not be covered by this
warranty. Removal and installation costs, if any, would be paid by the owner as well as any freight or postage costs of
transporting the product to AudioXtra. AudioXtra shall not be liable or responsible for any loss of use of this product
or any form of consequential loss.
CONSUMER WARRANTY
This product is warranted by AudioXtra Pty Ltd to be free from defects in materials and workmanship under
NORMAL USE for a period of TWENTY FOUR MONTHS from the date of purchase.
WITHIN 30 DAYS OF PURCHASE DATE:
Please return the unit for replacement to our National Service Centre or the Retailer from where you made the
purchase. All accessories must be included. Proof of purchase date must accompany the products.
AFTER 30 DAYS OF PURCHASE DATE:
Warranty repair and service is carried out by our National Service Centre. Repair and service will be carried out at no
cost to the owner if proof of ownership and the date of purchase can be verified to the satisfaction of the authorised
centre concerned with this repair. This proof should take the form of either:
a) The warranty card accompanying this product, stamped and dated by the dealer.
b) A Tax Invoice or Receipt showing full details of original vendor, purchaser, model number and serial number.
COMMERCIAL WARRANTY
A product used in or associated with a commercial application will carry a limited SIX MONTH warranty. An abnormal
commercial application is one where usage, dust, vibration, heat/cold and other environmental conditions exist at an
extreme level.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Please complete details below in the event of warranty service being required.
Purchaser’s Name:
Purchaser’s Address:
Model Number:
Dealer Name:
Dealer Address:
Invoice/Sales Docket no:
Serial Number:
Date of Purchase: / /
General Hints: To expedite service and prompt return of the equipment, please:
a) Clearly describe the fault in detail b) Safely and securely pack the unit for transport
c) Include your return address d) Provide proof of purchase date as outlined above
National Service Centre:
10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148 Australia
Telephone: (02) 8841 9000 Fax: (02) 9636 1204
PTY
LT D
audioxtra.com.au
WARRANTY
JS5020K
/