GVA GVAFLED32 User manual

Instruction Manual

32” (80cm)

FHD LED LCD TV

/ GVAFLED32

2

Contents

Preface 4

Safety Precautions 4

Important Safety Instructions 7

In the Carton 10

Connections and Functions 11

Basic Installation 12

Remote Control 16

Remote Control Setup 22

Using the Remote Control 22

Basic Operation 23

First Time Installation 24

Input Source 25

Information Display 25

Picture Mode 25

Sound Mode 25

Audio Language 25

Sleep Timer 25

EPG (Electronic Program Guide) 26

PVR and Time Shift Operation 27

Setting up and Connecting a Storage Device 27

PVR File System 27

Speed 28

Record Start 29

Time Recorder 29

Viewing Recorded Programs 30

Time Shift Mode 31

The On-Screen Display (OSD) Menu 32

Menu Options on TV Mode 33

Channel Menu 33

Picture Menu 34

Sound Menu 35

Time Menu 37

Lock Menu 38

3

Contents

Setup Menu 40

Menu Options in PC Mode 42

Media (USB) Mode 43

Specications 46

Wall Mounting Instructions 47

Care and Maintenance 48

Responsible Disposal 49

FAQs 50

4

Preface

Thank you for building this TV! Please read this manual thoroughly before operating the TV.

Make sure the TV was not damaged in transit. Should the TV is damaged, do not install it and

contact your dealer. Check that you have all the accessories according to the model.

Safety Precautions

4

Preface

Thank you for buying this TV! Please read this manual thoroughly before operating the TV.

Make sure the TV was not damaged in transit. If the TV is damaged, do not install it and

contact your dealer. Check that you have all of the accessories supplied with this unit.

Safety Precautions

Put the TV on a stable surface.

Do not place anything on the TV.

Do not use the TV with xtures other than those provided

or suggested by the manufacturer. Always leave some space

around the appliance, at least a few centimeters.

Do not block or cover the ventilation openings on the TV. If

you have a wall mount, check that it is steady.

Put the TV on a stable surface.

Do not place any material on the TV.

Do not use the TV with xtures other than those provided or

suggested by the manufacturer.

Do not block or cover the ventilation openings on the TV. If

you have a wall mount, check that it is steady.

5

Power cord and cables must be properly routed and protected

to prevent people from stepping on them and causing the TV

to fall.

Keep the TV dry and away from humidity.

Keep the TV away from heat sources.

Unplug the TV before cleaning it. Do not use solvent or liquid

to clean the TV. Once Clean the TV with soft and dry cloth.

Safety Precautions (Cont.)

5

The power cord and cables must be properly inserted and

protected to prevent people from stepping on them or

causing the TV to fall.

Keep the TV dry and away from humidity.

Keep the TV away from heat sources.

Unplug the TV before cleaning it. Do not use solvent or

liquid to clean the TV. Only clean the TV with a soft, dry

cloth.

Safety Precautions (Cont.)

6

In cause of troubleshooting, do not use spare parts

other than those suggested by the manufacturer. Using

inadequate spare parts can lead to electric shocks, short-

circuits re or other incidents.

Unplug the TV during lightening storms or when unused for

long periods of time.

Safety Precautions (Cont.)

6

Do not use spare parts other than those suggested by the

manufacturer. Using inadequate spare parts can lead to

electric shocks, short circuits, re or other incidents.

Unplug the TV during lightning storms or when unused for

long periods of time.

Safety Precautions (Cont.)

7

Important Safety Instructions

Read this manual thoroughly before rst use and keep it in a safe place for future reference,

along with the warranty card, purchase receipt and carton. The safety precautions enclosed

herein reduce the risk of re, electric shock and injury when correctly adhered to.

Usage conditions and restrictions

To prevent any injuries, the following safety precautions should be observed in the

installation, use, servicing and maintenance of equipment. Before operating this equipment,

please read this manual completely, and keep it nearby for future reference.

• Take notice of all the warnings.

• Do not use this TV near water.

• Clean only with a dry cloth.

• Do not block any of the ventilation openings.

• Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other TV’s

(including ampliers) that produce heat.

• Do not alter the grounding type plug provided with the TV. A grounding type plug has two

blades and a third grounding prong. The third prong is provided for your safety. When the

provided plug does not t into your outlet, consult an electrician for replacement of the

obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the TV.

• Only use the attachments/accessories specied by the manufacturer.

• Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold

with the TV.

• Unplug this TV during lightning storms or when unused for long periods of time.

• The appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible

for their safety.

• Young children should be supervised to ensure they do not play with the appliance.

• Refer all servicing to qualied service personnel. Servicing is required when the TV has been

damaged in any way, such as power supply cord or plug is damaged, liquid has been spilt

or objects have fallen into the TV, the TV has been exposed to rain or moisture, does not

operate normally, or has been dropped.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualied persons in order to avoid a hazard.

NOTE: The TV must not be exposed to dripping or splashing and no objects lled with

liquids, such as vases, should be placed on the TV.

8

Important Safety Instructions

Position

• If a television is not positioned in a suciently stable location, it can be potentially

hazardous due to falling. Many injuries, particularly to children, can be avoided by taking

simple precautions such as:

• Securely attaching the TV to the wall mount fastened on the wall.

• Only using furniture that can safely support the television.

• Ensuring the television is not overhanging the edge of the supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the TV controls.

• Not standing the TV on cloth or other materials placed between the television and

supporting furniture.

• Not placing the television on tall furniture (for example, cupboards or bookcases)

without anchoring both the furniture and the television to a suitable support.

• When deciding on where to put the TV set, make sure the place is:

• Well ventilated.

• Away from damp and cold.

• Protected from overheating and away from direct sunlight.

• Away from moisture drips or splashes.

• Protected from excessive dust.

• Do not install this equipment in a conned space such as a bookcase or similar unit.

• Do not put any objects lled with liquids, such as vases, on top of the TV set.

• Do not place any naked ame sources, such as lighted candles, on top of the TV set.

Cleaning and maintenance

• Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.

Electrical safety, power cord and plug

• Before installing this TV set, make sure your outlet voltage corresponds to the voltage

stated on the appliance rating label.

• To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.

• Do not overload the power cord or power outlet.

• Do not let the cord hang over the edge of a table or counter, or touch any hot surface.

• Do not allow anything to rest on or roll over the power cord and signal cable.

• Protect the power cord and signal cable from being trampled.

• Do not expose the power cord and signal cable to moisture.

9

Important Safety Instructions

• Do not apply excessive force to the screen when cleaning.

• Do not clean the screen with water or chemical cleaners as this may damage the LED

screen surface.

• Do not dismantle this product by yourself, as this may cause damage. There are no user-

serviceable parts contained in the TV set.

• If your TV set has been damaged, contact the after sales support line for advice or take

it to a local service centre for inspection or repair. No liability can be accepted for any

damage caused by non-compliance with these instructions or any other improper use or

mishandling of appliance.

WARNING:

TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR AN ELECTRIC SHOCK HAZARD, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTIONS: • These servicing instructions are for use by qualied service personnel only. To

reduce the risk of electric shock, do not perform any servicing other than that

contained in the operating instructions unless you are qualied to do so.

• Any changes or modications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This symbol indicates that dangerous voltage constituting a risk of

electric shock is present within this unit.

This symbol indicates that there are important operating and

maintenance instructions in the documentation accompanying this unit.

CAUTION: TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

10

In the Carton

10

In the Carton

Screws and Metal Plate

Mini YPbPr Cable

11

Connections and Functions

1. ANT: Connection for the antenna plug.

2. HDMI: Connect to the HDMI output socket of a

DVD player.

3. Video: Connect to a DVD player’s VIDEO output

socket.

4. R/L: Connect the R/L AUDIO output socket of DVD.

5. COAX: Connect to an external digital audio device.

6. USB: Connect to portable USB storage device.

7. Headphone: Connect the earphone.

8. YPbPr: Connect to the (Component) output socket

of a DVD Player.

9. PC Audio: Connect to a PC’s audio output socket.

10. VGA: Connect to a PC’s PC-RGB output socket.

11. AC 100 - 240V: Main power input.

Front and Back Connection of LED TV

Back View and Control Connections

11

Connections and Functions

1. ANT: Connection for the antenna plug.

2. HDMI: Connect to the HDMI output socket of a

DVD player.

3. Video: Connect to a DVD player’s VIDEO output

socket.

4. R/L: Connect the R/L AUDIO output socket of DVD.

5. Coax: Connect to an external digital audio device.

6. USB: Connect to portable USB storage device.

7. Headphone: Connect the earphone.

8. YPbPr: Connect to the (Component) output socket

of a DVD Player.

9. PC Audio: Connect to a PC’s Audio output socket.

10. VGA: Connect to a PC’s PC-RGB output socket.

11. AC 100 - 240V: Main power input.

Front and Back Connection of LED TV

Back View and Control Connections

1. Press “POWER” button to turn TV on or

2. Press “SOURCE” to select the input

source.

3. Press “MENU” to bring up the main

menu on the screen.

4. Press “CH+” or “CH-” to scan through

channels.

5. Press “VOL+” or “VOL-” to increase or

decrease the volume.

6. REMOTE SENSOR: Infrared sensor for

the remote control.

7. POWER INDICATOR: Show red in

standby mode, show blue when your

TV is switched on.

1

2

3

4

5

7

6

POWER

1. Press “POWER” button to turn TV on or

o.

2. Press “SOURCE” to select the input

source.

3. Press “MENU” to bring up the main

menu on the screen.

4. Press “CH+” or “CH-” to scan through

channels.

5. Press “VOL+” or “VOL-” to increase or

decrease the volume.

6. REMOTE SENSOR: Infrared sensor for

the remote control.

7. POWER INDICATOR: Show red in

standby mode, show blue when your

TV is switched on.

11

Connections and Functions

1. ANT: Connection for the antenna plug.

2. HDMI: Connect to the HDMI output socket of a

DVD player.

3. Video: Connect to a DVD player’s VIDEO output

socket.

4. R/L: Connect the R/L AUDIO output socket of DVD.

5. Coax: Connect to an external digital audio device.

6. USB: Connect to portable USB storage device.

7. Headphone: Connect the earphone.

8. YPbPr: Connect to the (Component) output socket

of a DVD Player.

9. PC Audio: Connect to a PC’s Audio output socket.

10. VGA: Connect to a PC’s PC-RGB output socket.

11. AC 100 - 240V: Main power input.

Front and Back Connection of LED TV

Back View and Control Connections

1. Press “POWER” button to turn TV on or

2. Press “SOURCE” to select the input

source.

3. Press “MENU” to bring up the main

menu on the screen.

4. Press “CH+” or “CH-” to scan through

channels.

5. Press “VOL+” or “VOL-” to increase or

decrease the volume.

6. REMOTE SENSOR: Infrared sensor for

the remote control.

7. POWER INDICATOR: Show red in

standby mode, show blue when your

TV is switched on.

1

2

3

4

5

7

6

POWER

12

Basic Installation

Power Cord Connection

- Connect the power cord as shown.

- Press the POWER switch of your LED TV to switch the unit on. The power indicator on the

front panel lights up in blue.

12

Basic Installation

Power Cord Connection

- Connect the power cord as shown.

- Press the POWER switch of your LED TV to switch the unit on. The power indicator on the

front panel lights up in blue.

Antennas Connection

To ensure good picture and sound, a TV antenna system needs to be installed. The antenna

system as shown can be sourced from TV equipment shops, which will provide service for

correct installation and connections. After installation, insert the 75-OHM antenna plug into

the antenna socket as shown.

12

Antennas Connection

To ensure good picture and sound, a TV antenna system needs to be installed. The antenna

system as shown can be sourced from TV equipment shops, which will provide service for

correct installation and connections. After installation, insert the 75-OHM antenna plug into

the antenna socket as shown.

12

Basic Installation

Power Cord Connection

- Connect the power cord as shown.

- Press the POWER switch of your LED TV to switch the unit on. The power indicator on the

front panel lights up in blue.

Antennas Connection

To ensure good picture and sound, a TV antenna system needs to be installed. The antenna

system as shown can be sourced from TV equipment shops, which will provide service for

correct installation and connections. After installation, insert the 75-OHM antenna plug into

the antenna socket as shown.

12

13

Basic Installation (Cont.)

YPbPr Connection

Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality

is improved compared to connecting a regular VCR to the video input. Connect the Audio

output of the DVD or VCR to the Audio input sockets on the set using the RCA cable. Match

the sockets colours: Y is green, Pb is blue, Pr is red. Audio left is white and Audio right in red.

Select YPbPr input source using the SOURCE button on the remote control.

AV Connection

Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the

TV using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV

input source using the SOURCE button on the remote control.

13

Basic Installation (Cont.)

YPbPr Connection

Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality

is improved compared to connecting a regular VCR to the video input. Connect the Audio

output of the DVD or VCR to the Audio input sockets on the set using the RCA cable. Match

the sockets colours: Y is green, Pb is blue, Pr is red. Audio left is white and Audio right in red.

Select YPbPr input source using the SOURCE button on the remote control.

AV Connection

Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the

TV using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV

input source using the SOURCE button on the remote control.

HD M I1 HD M I3HD M I2

13

HD M I1 HD M I3HD M I2

HD M I1 HD M I3HD M I2 C OAX

Mini YPbPr Cable

13

Basic Installation (Cont.)

YPbPr Connection

Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality

is improved compared to connecting a regular VCR to the video input. Connect the Audio

output of the DVD or VCR to the Audio input sockets on the set using the RCA cable. Match

the sockets colours: Y is green, Pb is blue, Pr is red. Audio left is white and Audio right in red.

Select YPbPr input source using the SOURCE button on the remote control.

AV Connection

Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the

TV using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV

input source using the SOURCE button on the remote control.

HD M I1 HD M I3HD M I2

13

HD M I1 HD M I3HD M I2

HD M I1 HD M I3HD M I2 C OAX

Mini YPbPr Cable

14

Basic Installation (Cont.)

VGA (PC) Connection

Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output

of the PC to the PC AUDIO socket on the set. Select the PC input source using the SOURCE

button on the remote control.

HDMI Connection

HDMI connection allows the user to transfer both audio and video control signals through

one cable only. These signals are transferred in digital.

14

Basic Installation (Cont.)

VGA (PC) Connection

Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output

of the PC to the PC AUDIO socket on the set. Select the PC input source using the SOURCE

button on the remote control.

HDMI Connection

HDMI connection allows the user to transfer both audio and video control signals through

one cable only. These signals are transferred in digital.

��

HD M I1 HD M I3HD M I2

14

Basic Installation (Cont.)

VGA (PC) Connection

Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output

of the PC to the PC AUDIO socket on the set. Select the PC input source using the SOURCE

button on the remote control.

HDMI Connection

HDMI connection allows the user to transfer both audio and video control signals through

one cable only. These signals are transferred in digital.

��

HD M I1 HD M I3HD M I2

15

Basic Installation (Cont.)

Coax Connection

Connect the Coaxial output of the TV to the Coaxial (SPDIF) input on the amplifier. Your

amplifier must have the corresponding decoding functions to decode the signal coming

from the TV.

15

Basic Installation (Cont.)

Coax Connection

Connect the Coaxial output of the TV to the Coaxial (SPDIF) input on the amplier. Your

amplier must have the corresponding decoding functions to decode the signal coming

from the TV.

��

� ��

USB Connection

A portable USB device can be connected to the USB socket.

��

� ��

HD M I1

USB Connection

A portable USB device can be connected to the USB socket.

15

Basic Installation (Cont.)

Coax Connection

Connect the Coaxial output of the TV to the Coaxial (SPDIF) input on the amplier. Your

amplier must have the corresponding decoding functions to decode the signal coming

from the TV.

��

� ��

USB Connection

A portable USB device can be connected to the USB socket.

��

� ��

HD M I1

16

Remote Control

The buttons on the remote control and buttons marked similar on the TV unit

performs similar function.

16

Remote Control

The buttons on the remote control and buttons marked similar on the TV unit

performs similar function.

The buttons on the remote control and similarly marked ones on the main unit

perform similar functions.

VOLVOL

DISPLAYSOURCE

CH.CH.

OK

TITLE

HOLD

ZOOM

D.MENU

INPUTP.MODE PMODES.MODE SMODEFREEZE SLEEPDISPLAY

MUTEMUTE

NICAM

ASPECTSLEEP

AUDIO

LANGUAGE

AUTOTV/RADIO

MENUMENU EXIT

FAVEPG EPGSUBTITLE

MEDIA

TEXT/MIX

INDEX

HOLD LANG

SUBTITLE

GOTO

DVD SETUP

ANGLE

REPEAT

A-B

SIZE

FAV

-

-/--

LCD

2

1

3

4

5

7

9

10

11

14

16

*

17

6

8

12

13

15

18

19

Remote Control

1 6

GVAFLED32

17

Remote Control (Cont.)

TV Control in DTV Mode

1. POWER : Press “POWER” button to turn standby mode on or off.

2. TV/RADIO : Select TV or Radio modes.

3. MUTE : Press to mute the sound. Press again to unmute the TV.

4. NUMBER BUTTONS: Press 0-9 to select a TV channel directly when you are watching

TV. The channel changes after 2 seconds.

5. CHANNEL RETURN : Return to the previous channel viewed.

6. AUDIO / Language: Select audio language. / Select language.

7. CH+/-: Press to change to the next channel.

8. SOURCE: Press to cycle through the input source.

9. NAV / / / : Allows you to navigate the on-screen menus and adjust the system

settings to your preference.

10. OK: Confirm Selection / Enter button.

11. EXIT: Exit the main TV menu.

12. DISPLAY: Press to display the source and channel’s information.

13. HOLD / FREEZE: Hold teletext / freeze picture or current page.

14. SMODE: Press to cycle through the different sound settings.

15. PMODE: Press it to cycle through the available video picture modes.

16. MENU: Brings up the main menu to the screen.

17. VOL+/-: Press to increase/decrease the sound level.

18. SLEEP: Select amount of time. Let your TV turn off automatically.

19. MULTI-DIGITS -/-- : Press this button to enter a program number for multiple program

channel such as 2-1,etc.

* DVD functions may not apply if your TV does not come with built-in DVD player.

D.MENU / EPG: DVD disc menu / Launches the EPG ( Electronic Program Guide) in DTV

mode.

FAV: Press to display your favourite program in DTV mode.

ZOOM / SIZE: Press this button to select the different screen size on your TV.

SUBTITLE: To display subtitle.

MEDIA: Press to select MEDIA mode.

18

Remote Control (Cont.)

The buttons on the remote control and buttons marked similar on the TV unit

performs similar function.

16

Remote Control

The buttons on the remote control and buttons marked similar on the TV unit

performs similar function.

The buttons on the remote control and similarly marked ones on the main unit

perform similar functions.

VOLVOL

DISPLAYSOURCE

CH.CH.

OK

TITLE

HOLD

ZOOM

D.MENU

INPUTP.MODE PMODES.MODE SMODEFREEZE SLEEPDISPLAY

MUTEMUTE

NICAM

ASPECTSLEEP

AUDIO

LANGUAGE

AUTOTV/RADIO

MENUMENU EXIT

FAVEPG EPGSUBTITLE

MEDIA

TEXT/MIX

INDEX

HOLD LANG

SUBTITLE

GOTO

DVD SETUP

ANGLE

REPEAT

A-B

SIZE

FAV

-

-/--

LCD

2

1

3

4

5

7

9

10

11

14

16

*

17

6

8

12

13

15

18

19

Remote Control

1 6

GVAFLED32

19

Remote Control (Cont.)

: PLAY/PAUSE in TIMESHIFT mode.

: Stop in TIMESHIFT mode or exit the REC mode.

/ : Fast reverse and forward key in TIMESHIFT mode.

/ : Jump to previous and next track or chapter in TIMESHIFT mode.

INDEX: Teletext INDEX display button.

TEXT / MIX: Press to switch between TV and Teletext / Mix mode.

DVD SETUP / : Press to start recording in TIMESHIFT mode.

TV Control in DVD / Media Mode

ANGLE: Press the GREEN button to display the current playback angle; press again to

toggle between different playback angle codes in sequence.

NOTE: Selectable playback angle is only available if DVD has this feature.

ZOOM: Press to zoom in on picture.

AUDIO: Select audio language.

SUBTITLE: To display subtitle.

D.MENU: DVD disc menu.

TITLE: Press to display the title.

: PLAY/PAUSE in DVD / Media mode.

: Stop in DVD / Media mode or exit the REC mode.

/ : Fast reverse and forward key in DVD / Media mode.

/ : Jump to previous and next track or chapter in DVD / Media mode.

GOTO: Press the RED button to activate the on-screen scroll down menu for editing.

REPEAT: Press the YELLOW button to play back a portion automatically (choose between

OFF / CHAPTER / TRACK / REP ALL).

A-B: Press the BLUE button to start the repeat portion from A-B.

20

Remote Control (Cont.)

The buttons on the remote control and buttons marked similar on the TV unit

performs similar function.

16

Remote Control

The buttons on the remote control and buttons marked similar on the TV unit

performs similar function.

The buttons on the remote control and similarly marked ones on the main unit

perform similar functions.

VOLVOL

DISPLAYSOURCE

CH.CH.

OK

TITLE

HOLD

ZOOM

D.MENU

INPUTP.MODE PMODES.MODE SMODEFREEZE SLEEPDISPLAY

MUTEMUTE

NICAM

ASPECTSLEEP

AUDIO

LANGUAGE

AUTOTV/RADIO

MENUMENU EXIT

FAVEPG EPGSUBTITLE

MEDIA

TEXT/MIX

INDEX

HOLD LANG

SUBTITLE

GOTO

DVD SETUP

ANGLE

REPEAT

A-B

SIZE

FAV

-

-/--

LCD

2

1

3

4

5

7

9

10

11

14

16

*

17

6

8

12

13

15

18

19

Remote Control

1 6

GVAFLED32

Page is loading ...

GVA GVAFLED32 User manual

GVA GVAFLED32 User manual

Other documents