jbc GSFR10V03 is a guide kit designed to be used with the Solder Feeder SFR in automatic soldering processes. It includes a counter wheel, intermediate nozzle, inlet nozzle, guide wheel, blade, blade clamp, screws, support wheel, and traction wheel. The guide kit can be used with solder wire diameters ranging from 0.8mm to 1.6mm. It has a tube length of 0.3m and an outlet nozzle reference of 0025344. The guide kit is RoHS compliant and meets CE standards. It is ESD safe and comes with a 2-year warranty from JBC.
jbc GSFR10V03 is a guide kit designed to be used with the Solder Feeder SFR in automatic soldering processes. It includes a counter wheel, intermediate nozzle, inlet nozzle, guide wheel, blade, blade clamp, screws, support wheel, and traction wheel. The guide kit can be used with solder wire diameters ranging from 0.8mm to 1.6mm. It has a tube length of 0.3m and an outlet nozzle reference of 0025344. The guide kit is RoHS compliant and meets CE standards. It is ESD safe and comes with a 2-year warranty from JBC.
GSFR
Guide Kit for SFR
INSTRUCTION MANUAL
Threaded
Studs
Screws
Packing List
Guide Tube
Inlet Nozzle
(for SFR-B)
Counter Wheel
Guide Wheel
Blade
Interm.Nozzle
Outlet Nozzle
Guide Kit with Solder Wire Perforation
Manual .......................................................... 1 unit
Ref. 0021649
The following items are included. See Exploded View (page 8) for references.
This manual corresponds to the following references:
GSFR..V.. with Solder Wire Perforation - described on page 8 of this manual.
GSFR..D.. Without Solder Wire Perforation - described on page 9 of this manual.
Inlet Nozzle
(for SFR-A)
Blade Clamp
2
Threaded
Studs
Screws
Guide Tube
Inlet Nozzle
(for SFR-B)
Traction WheelInterm. Nozzle
Outlet Nozzle
Inlet Nozzle
(for SFR-A)
Guide Kit without Solder Wire Perforation
Counter Wheel
Support Wheel
Features
The Guide Kit GSFR is designed to be used
with the Solder Feeder SFR in automatic
soldering processes.
Manual .......................................................... 1 unit
Ref. 0021649
The following items are included. See Exploded View (page 9) for references.
Packing List
www.jbctools.com
3
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
Assembly: GSFR Wheels to SFR
Assembly with Solder Wire Perforation
1. Assemble the counter wheel (1).
2. Insert the intermediate nozzle (2) until its collar
rests against the housing and tighten the screw.
3. Assemble the inlet nozzle (3) and tighten the
screw.
4. Assemble the guide wheel (4) and tighten the
screw. Attention: Always use the correct wheel
set for each wire thickness.
5. Assemble the blade first, then mount the
blade clamp (5) onto the same axis and tighten
the screw. Caution: handle the blade carefully
to avoid injury.
2
3
45
Blade
Blade Clamp
Inlet
Nozzle
Guide
wheel
Traction
Wheel
Support
Wheel
Inter-
mediate
Nozzle
Inter
mediate
Nozzle
For this operation, disconnect the device, and take off the cover by pressing the tabs.
First disassemble the guide tube (6), the nozzles (1)+(4), then the Wheels, Blade and Clamp (2)+(3).
Disassemble the Counter Wheel (5). Use the allen key and the spanner, provided with SFR.
Assemblly without Solder Wire Perforation
1. Assemble the counter wheel (1).
2. Insert the intermediate nozzle (2) until its collar
rests against the housing and tighten the screw.
3. Assemble the inlet nozzle (3) and tighten the
screw.
4. Assemble the support wheel (4) and tighten
the screw. Attention: Always use the correct
wheel set for each wire thickness.
5. Assemble the traction wheel (5) onto the axis
and tighten the screw.
Inlet
Nozzle
Counter
Wheel
66
2
4
5
3
1
Counter
Wheel
1
4
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
4
2
1
3
5
*Not included, sold separately
Solder Feeder
Ref. SFR-B
GSFR Guide Tube*
Automatic
Soldering Iron*
Ref. TRA-B
Reel Support
Ref. 0024561
Screws
Ref. 0024552
GSFR Bushing*
GSFR
Outlet Nozzle*
The guide position
can be adjusted in
angle, height and
length
Screw
Ref. 0490180
Assembly: GSFR Tube to SFR* and TRA*
1. Assemble SFR to TRA with the screws.
2. Assemble GSFR Guide Tube to TRA and tighten the screw.
3. Assemble the Outlet Nozzle onto the Dispensing Tube.
4. Assemble GSFR Bushing into SFR hole and tighten the screw.
5. Finally attach the Reel Support to SFR with its screw.
www.jbctools.com
5
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
SFR-B
GSFR
TRA
CLR
EXTRACCIÓN
22220
EXTRACCIÓN
26842
26843
EXTRACCIÓN
26846
26847
26848
EXTRACCIÓN
26844
VERMELL
NEGRE GROC
VERMELL
BLAU
VERMELL
BLAU
BLAU
VERD
VERMELL
BLAU
VERD
VERMELL
NEGRE GROC
VERMELL
BLAU
BLAU
VERD
Lorem ipsum
Solder Wire Wheels
Inlet
Nozzle
Guide
Tube
Intermediate
Nozzle
Intermediate
Nozzle
Solder Wire Loading
GSFR must be assembled previously.
1. Feed the Solder Wire into the Inlet Nozzle until it reaches the wheels.
2. Make sure the wire passes through the Intermediate Nozzle and enters into the Guide Tube.
Important: Set the wire thickness parameter before starting to dispense the wire. To set W-THI
command see the Communication Protocol for SFR unit at www.jbctools.com/jbcsoftware.html.
Wire feeding is controlled by an external controller (Robot/PLC/Computer). To start wire loading
process use W-SLD command. See the Communication Protocol for SFR unit at www.jbctools.
com/jbcsoftware.html
1
2
6
It is imperative to follow safety guidelines to prevent electric shock,
injury, fire or explosion.
- Do not use the device for any other purpose.
- Be sure that the power supply is disconnected before changing any spare part.
- Avoid flux coming into contact with skin or eyes to prevent irritation.
- Be careful of fumes produced while soldering.
- Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves while
handling components to avoid personal injury.
- Utmost care must be taken with liquid tin waste which can cause burns.
Safety
- Before carrying out maintenance, always unplug the tool and the device.
- Use a damp cloth to clean the tool. Alcohol can only be used to clean the metal parts.
- Periodically check that the metal parts of the mechanism are clean.
- Keep Dispensing Nozzle Tip clean to avoid solder feeding obstruction.
- Periodically check all cables and tube connections.
- Replace any defective or damaged parts. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Maintenance
www.jbctools.com
7
GSFR XX V LL
WITH SOLDER WIRE PERFORATION
Tube lenght
Wire
Outlet nozzle Ref.
Guide wheel Ref.
Blade Ref.
Blade clamp Ref.
Inlet nozzle Ref.
(for SFR-A)
Interm. nozzle Ref.
Inlet nozzle
Ref.
(for SFR-B)
Counter wheel Ref.
Screws Ref.
Threaded stud Ref.
GSFR
08
V
LL
0025270 0021696
0021555 0018638
0023740 0024955
0024876
0026693 (Provide
with SFR)
0026695 (x2)
0026696 (x3)
GSFR
10
V
LL
0021560 0021699 0023741 0024956
0024877
GSFR
12
V
LL
0025272 0023738 0023736 0024957
0024878
GSFR
15
V
LL
0025274 0025285 0023855 0024958
0026698 0026694
GSFR
16
V
LL
0025276 0025922
-
0024959
0026697
Wire diameter
XX
Diameter of use
08
0,8 mm
0,032 in
10
1,0 mm
0,040 in
12
1,2 mm
0,047 in
15
1,5 mm
0,059 in
16
1,6 mm
0,063 in
Tube lenght
LL
Lenght
03 0,3 m
11,81 in
04 0,4 m
15,75 in
05 0,5 m
19,69 in
07 0,7m
27,56 in
10 1,0 m
39,37 in
15 1,5 m
59,05 in
Guide kit Ref.
Guide tube Ref.
GSFR
08
X
03 0025344
GSFR
08
X
05 0025311
GSFR
08
X
07 0025345
GSFR
08
X
10 0025346
GSFR
10
X
03 0025347
GSFR
10
X
10 0025348
GSFR
12
X
03 0025349
GSFR
12
X
10 0025350
GSFR
15
X
03 0025351
GSFR
15
X
04 0025352
GSFR
15
X
05 0025353
GSFR
15
X
10 0025354
GSFR
16
X
03 0025355
GSFR
16
X
04 0025776
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION THAT CANNOT BE USED, COPIED, DISTRIBUTED, REPRODUCED
OR PASSED TO ANY THIRD PARTY, IN WHOLE OR IN PART, WITHOUT WRITTEN AUTHORIZATION FROM JBC Soldering, S.L.
CONFIDENTIAL:
1:1
SCALE
ISO 2768-f
GSFR16V04
DIMENSIONS IN
MILLIMETERS
DIN
RoHS
Compliant
GENERAL
TOLERANCES
A3
DRAWN BY
Marga Lorenz
7843
3035
INSPECT. GUIDELINE
TECHNICAL DOC.
96051
08/04/2022
COMPATIBLE
DATE
PLANO COMERCIAL
SUBSTITUTES
DESCRIPTION
KIT GUIA CUT SFR Ø1.6 X 0.4M
ADDITIONAL DESCRIPTION
PART NUMBER
DRAWING No.
Exploded View
8
GSFR XX D LL
WITHOUT SOLDER WIRE PERFORATION
*Tube lenght 30cm (X03) and 1m (X10)
Tube lenght
Wire
Wire diameter
XX
Range of use
05 0,5 mm
0,020 in
06 0,6 mm
0,025 in
07 0,7 mm
0,028 in
08 0,8 mm
0,032 in
10 1,0 mm
0,040 in
12 1,2 mm
0,047 in
15 1,5 mm
0,059 in
16 1,6 mm
0,063 in
Tube lenght
LL
Lenght
03 0.3 m
11.81 in
04 0.4 m
15.75 in
05 0.5 m
19.68 in
07 0.7 m
27.92 in
10 1.0 m
39.37 in
15 1.5 m
59.05 in
Guide kit Ref.
Guide tube Ref.*
GSFR
05
X
03 0025340
GSFR
05
X
07 0025341
GSFR
05
X
10 0026825
GSFR
06
X
03 0025342
GSFR
07
X
03 0025343
GSFR
08
X
03 0025344
GSFR
08
X
05 0025345
GSFR
08
X
10 0025346
GSFR
10
X
03 0025347
GSFR
10
X
07 0027013
GSFR
10
X
10 0025348
GSFR
12
X
03 0025349
GSFR
15
X
03 0025351
GSFR
15
X
05 0025353
GSFR
15
X
10 0025354
GSFR
16
X
03 0025355
Outlet nozzle Ref.
Traction wheel Ref.
Support wheel Ref.
Inlet nozzle Ref.
(for SFR-A)
Interm. nozzle Ref.
Inlet nozzle Ref.
(for SFR-B)
Counter wheel Ref.
Screws Ref.
Threaded stud Ref.
GSFR
05
D
LL
0025268
0019479
0019519
-
0024954
0025262
0026693
(Provided with SFR)
0026695 (x2) 0026696 (x3)
GSFR
06
D
LL
0022994 0025293
0025295
GSFR
07
D
LL
0025289
0019480
0025291
0025297
GSFR
08
D
LL
0025270 0023740 0024955
0024876
GSFR
10
D
LL
0021560 0023741 0024956
0024877
GSFR
12
D
LL
0025272
0019481
0023736 0024957
0024878
0026694
GSFR
15
D
LL
0025274 0023855 0024958
0026698
GSFR
16
D
LL
0025276
-
0024959
0026697
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION THAT CANNOT BE USED, COPIED, DISTRIBUTED, REPRODUCED
OR PASSED TO ANY THIRD PARTY, IN WHOLE OR IN PART, WITHOUT WRITTEN AUTHORIZATION FROM JBC Soldering, S.L.
CONFIDENTIAL:
1:1
SCALE
ISO 2768-f
GSFR10D07
DIMENSIONS IN
MILLIMETERS
DIN
RoHS
Compliant
GENERAL
TOLERANCES
A3
DRAWN BY
Marga Lorenz
7843
3035
INSPECT. GUIDELINE
TECHNICAL DOC.
96049
07/04/2022
COMPATIBLE
DATE
PLANO COMERCIAL
SUBSTITUTES
DESCRIPTION
KIT GUIA SFR Ø1.0 X 0.7M
ADDITIONAL DESCRIPTION
PART NUMBER
DRAWING No.
Exploded View
www.jbctools.com
9
Notes
10
www.jbctools.com
11
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0021649-0421
Specifications
GSFR
Guide Kit For Robot
Ref.: GSFR..V.. With Solder Wire Perforation (Ref. described on page 8 of this manual)
Ref.: GSFR..D.. Without Solder Wire Perforation (Ref. described on page 9 of this manual)
- Total Net Weight: 42 g kg / 0.093 lb
- Total Package Dimensions / Weight: 245 x 185 x 45 mm / 117 g
(L x W x H) 9.65 x 7.28 x 1.77 in / 0.258 lb
Complies with CE standards.
ESD safe.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
jbc GSFR10V03 User manual
- Type
- User manual
- This manual is also suitable for
jbc GSFR10V03 is a guide kit designed to be used with the Solder Feeder SFR in automatic soldering processes. It includes a counter wheel, intermediate nozzle, inlet nozzle, guide wheel, blade, blade clamp, screws, support wheel, and traction wheel. The guide kit can be used with solder wire diameters ranging from 0.8mm to 1.6mm. It has a tube length of 0.3m and an outlet nozzle reference of 0025344. The guide kit is RoHS compliant and meets CE standards. It is ESD safe and comes with a 2-year warranty from JBC.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI