jbc J125010 User manual

Category
Soldering irons
Type
User manual

The jbc J125010 is a heating element compatible with the NH High-Precision Heater Hose Set, designed for use with JNA Control Units. It allows for quick and safe replacement of the heating element without turning off the station, saving time during作業.

The jbc J125010 is a heating element compatible with the NH High-Precision Heater Hose Set, designed for use with JNA Control Units. It allows for quick and safe replacement of the heating element without turning off the station, saving time during作業.

NH
High-Presicion Heater Hose Set
for JNA
INSTRUCTION MANUAL
High-Precision Heater Hose Set .......... 1 unit Manual .......................................................... 1 unit
Ref. 0026662
Packing List
The following items are included:
This manual corresponds to the following references:
NH-A
High Precision
Heater Hose Set
Ref. NH-A
Features and Connections
Heating Element
Ref. J125010
(not included)
JNASE
Control Unit
(not inluded)
2
T210 / T245 / T470
NT115
AN115
AM120
AT420
NP115
PA120
HT420
HT470
DS360
DR560
AP250
AL250
SF280
JT-TA
TE-TB
NH-A
PA120
PA120
AL250
0.9-1 Ø0.9-1 Ø0.9-1 Ø
AL250
0.9-1 Ø0.9-1 Ø0.9-1 Ø
0.9-1 0.9-1 Ø0.9-1 Ø
NH
NH
NH
AP250 AP250
AP250
AP250
T210 / T245 / T470
NT115
AN115
AM120
AT420
NP115
PA120
HT420
HT470
DS360
DR560
AP250
AL250
SF280
JT-TA
TE-TB
NH-A
PA120
PA120
AL250
0.9-1 Ø0.9-1 Ø0.9-1 Ø
AL250
0.9-1 Ø0.9-1 Ø0.9-1 Ø
0.9-1 0.9-1 Ø0.9-1 Ø
NH
NH
NH
AP250 AP250
AP250
AP250
T210 / T245 / T470
NT115
AN115
AM120
AT420
NP115
PA120
HT420
HT470
DS360
DR560
AP250
AL250
SF280
JT-TA
TE-TB
NH-A
PA120
PA120
AL250
0.9-1 Ø0.9-1 Ø0.9-1 Ø
AL250
0.9-1 Ø0.9-1 Ø0.9-1 Ø
0.9-1 0.9-1 Ø0.9-1 Ø
NH
NH
NH
AP250 AP250
AP250
AP250
Changing the Heating Element
*Important
It is essential to insert the heating element far as the mark for a proper connection.
1. Removing 2. Inserting 3. Fixing
Place the heating element
in the extractor and pull the
handle to remove it.
Place the handpiece on top of
the new heating element and
press down slightly.
Use the holes to fix the
heating element.
Save time and change the heating element safely without switching the station off.
Mark
Holes
www.jbctools.com
3
AD-SF(T210 & T245)
AM-SB (AM120 & PA120)
AL-SG
NA-SA
AT-SB
SF-SE
WSST
DN-SF
AP-SF
HT-SF
DR-SF
DS-SF
HD-SF
HDT-SF
JT-SF
TE-SF
Maintenance
Before carrying out maintenance or storage,
always unplug the stand from the station and
the tool.
- Use a damp cloth to clean the stand.
Alcohol can be used only when cleaning
the metal parts.
- Check periodically that the metal parts of
the tool/stand are clean so that the station
can check the tool’s status.
- Periodically check all cables and tube
connections.
- Replace any defective or damaged parts.
Use original JBC spare parts only.
- Repairs should only be performed by a
JBC authorized technical service.
Clean
periodically
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
OK
OK
Maximum working temp: 250ºC (482ºF)
Fuse holder
Fuse holder
Fuse
OK
OK
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
240
ºC %
80
3m 18s
Profile ABC / Air temp
17:14
Prole ABC / Air temp
Hot Air Temp Air Flow
450
400
350
300
250
150
100
50
200
Power Temp
17:14
Ext. temp
17:14
20 ºC
Power
45% 120ºC Selected
TC
Temp .
4m 38s
400 ºC 80 %
400ºC Selected
Protec�on
Hot Air Temp. Air Flow Selec.
NH
NH
NH
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAU
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAU
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
OK
OK
Maximum working temp: 250ºC (482ºF)
Fuse holder
Fuse holder
Fuse
OK
OK
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
240
ºC %
80
3m 18s
Profile ABC / Air temp
17:14
Prole ABC / Air temp
Hot Air Temp Air Flow
450
400
350
300
250
150
100
50
200
Power Temp
17:14
Ext. temp
17:14
20 ºC
Power
45% 120ºC Selected
TC
Temp .
4m 38s
400 ºC 80 %
400ºC Selected
Protec�on
Hot Air Temp. Air Flow Selec.
NH
NH
NH
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAU
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAU
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
OK
OK
Maximum working temp: 250ºC (482ºF)
Fuse holder
Fuse holder
Fuse
OK
OK
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
240
ºC %
80
3m 18s
Profile ABC / Air temp
17:14
Prole ABC / Air temp
Hot Air Temp Air Flow
450
400
350
300
250
150
100
50
200
Power Temp
17:14
Ext. temp
17:14
20 ºC
Power
45% 120ºC Selected
TC
Temp .
4m 38s
400 ºC 80 %
400ºC Selected
Protec�on
Hot Air Temp. Air Flow Selec.
NH
NH
NH
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAU
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAU
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
Soft foam grips ensure a better manual control of the tool and greater comfort when working.
Easily replace the grips using the slip-on tabs.
1. Inserting Tabs 2. Inserting Handle 3. Removing Tabs
Grips for NH High Precision Heater Hose Set (Ref. 0024473)
Compatible Accessories (Not included)
Insert the slide-on tabs into the
new grip.
Push the grip with the tabs
onto the handle.
Hold the grip and pull them
out. Use a pliers if necessary.
4
Safety
- Do not use the stands for any purpose other than soldering or rework.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- The tool should be placed in the stand when is not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station
is turned off. Handle with care, including when adjusting the stand position.
- Avoid the contact of flux with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
www.jbctools.com
5
Notes
6
Notes
www.jbctools.com
7
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0026662-190723
NH
High-Presicion Heater Hose Set for JNA
Ref.: NH-A
- Net Weight 0.31 kg / 0.69 lb
- Total Package Dimensions/Weight: 382 x 159 x 81 mm / 0.45 kg
(L x W x H) 13.46 x 6.10 x 4.72 in / 0.98 lb
Complies with CE standards
ESD protected
Specifications
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

jbc J125010 User manual

Category
Soldering irons
Type
User manual

The jbc J125010 is a heating element compatible with the NH High-Precision Heater Hose Set, designed for use with JNA Control Units. It allows for quick and safe replacement of the heating element without turning off the station, saving time during作業.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI