Rechargeable Tactical LED
Flashlight
Rechargeable 18650 battery with charging cradle
LPE Optics
Dial mode selector
TackGrip molded rubber grip
Soft touch tactical tail cap
O-ring sealed, IPX6
XP910
4 Modes: High/Medium/Ultra Low/Strobe
Features
Product Warranty
Usage and Maintenance
Operation Instructions
1 18650
Battery
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Limited Lifetime Warranty against manufacturer’s de-
fects. For warranty claims contact LuxPro by calling
801-553-8886 or sending an email to info@simpleprod-
ucts.com.
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.
On/Off: Press and release button.
Cycle modes: Rotate mode dial to select any of 4 dif-
ferent modes (High/Medium/Ultra-Low/Strobe). Dial can
be rotated when light is on or off. The mode dial is ben-
eficial in pre-selecting a mode prior to entering certain
environments or activities.
Momentary On: Partially depress the button to momen-
tarily turn on the flashlight.
Ultra-Low
High
ANSI/PLATO FL1 STANDARD
25lm
1000 lm
LUMENSMODES
60h
3h 30m
RUN TIME
41m
160 m
Medium 250 lm 5h 30m 70 m
BEAM
DISTANCE
Strobe 1000 lm --
Battery Information: Included Lithium battery has a
charge time of 3hr. Li-ion; 3.7V 2000mAh. 2x CR123 Li-
ion cells can also be used with this product.
Battery tube dimensions: 18.5mm (.728in)
Battery Replacement: In a dry environment, unscrew the
tailcap by turning counter-clockwise. Remove batteries.
Insert new batteries into the tube (+) end first. Careful-
ly reinstall the tailcap by pressing lightly while turning
clockwise.
Battery charging: Place LuxPro 18650 battery into
provided battery charging cradle, note the proper
positioning with +/-. Plug Micro-USB cable into cradle,
and USB into 5V power source. LED light on cradle will
show red when charging, and green at full charge.
USB
Rechar geable 2 CR123
Batteries
/
