Visa Lighting CV1976PSX, a sleek and modern surface-mount luminaire, offers versatile lighting solutions for various applications. With its durable construction and high-quality components, this fixture ensures long-lasting performance. The CV1976PSX is designed for easy installation, allowing you to quickly set up your desired lighting ambiance.
Visa Lighting CV1976PSX, a sleek and modern surface-mount luminaire, offers versatile lighting solutions for various applications. With its durable construction and high-quality components, this fixture ensures long-lasting performance. The CV1976PSX is designed for easy installation, allowing you to quickly set up your desired lighting ambiance.
SLEIGHT
CV1976PSX
CV1980PSX
SHEET 2: SURFACE MOUNT
SHEET 3: JUNCTION BOX MOUNT
Drawing:
760841XX
Rev:
C
Sheet:
1 of 3
Eng:
DAF
Date Drawn:
10/28/10
INSTALLATION INSTRUCTIONS
Model:
Sleight
Fixture Family:
Mystique
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
!
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
•
Document Description: Installation Instructions for Sleight surface mount
CV1976PSX Series Luminaires
LENS ASSEMBLY
FRONT LED ASSEMBLY
#6 SET SCREW
Locate desired wall opening for power feed and drill up to 3/4" hole.
1.
Connect 24 volt power feed to fixture. Note: Excess wire can be trimmed before being
2.
pushed back into the wall.
Mount lens assembly to wall with hardware suitable for mounting surface.
Note: Make
3.
sure lens assembly is level before securing to wall.
Slide front LED assembly onto lens assembly, aligning posts into holes on the sides of
4.
front assembly and secure with set screws (2).
SURFACE MOUNT
Drawing:
760841XX
Rev:
C
Sheet:
2 of 3
Eng:
DAF
Date Drawn:
10/28/10
INSTALLATION INSTRUCTIONS
Model:
Sleight
Fixture Family:
Mystique
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
!
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
•
Document Description: Installation Instructions for Sleight surface mount
CV1976PSX Series Luminaires
JUNCTION BOX MOUNT
FRONT LED ASSEMBLY
#6 SET SCREW (2)
LENS ASSEMBLY
JUNCTION BOX MOUNTING PLATE
(REQUIRES ORDER OF JBC OPTION)
MOUNTING
SCREWS (4)
Mount junction box mounting plate (requires order of JBC option) to mounting surface,
1.
covering the junction box (by others).
Make sure the mounting plate is level, and mark the (2) holes for 16" version or (4) holes
2.
for the 32" version (shown).
Remove mounting plate from the wall and drill 5/16" holes and install wall anchors.
3.
Reinstall the mounting plate to the mounting surface. Secure plate with mounting screws.
4.
Make all wire connection in accordance to local and national codes.
5.
Mount lens assembly to wall with hardware suitable for mounting surface.
Note: Make
6.
sure lens assembly is level before securing to wall.
Slide front LED assembly onto lens assembly, aligning posts into holes on the sides of
7.
front assembly and secure with set screws (2).
Drawing:
760841XX
Rev:
C
Sheet:
3 of 3
Eng:
DAF
Date Drawn:
10/28/10
INSTALLATION INSTRUCTIONS
Model:
Sleight
Fixture Family:
Mystique
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
!
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
•
Document Description: Installation Instructions for Sleight surface mount
CV1976PSX Series Luminaires
-
1
-
2
-
3
Visa Lighting CV1976PSX, a sleek and modern surface-mount luminaire, offers versatile lighting solutions for various applications. With its durable construction and high-quality components, this fixture ensures long-lasting performance. The CV1976PSX is designed for easy installation, allowing you to quickly set up your desired lighting ambiance.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
visalighting CB5523 User manual
-
visalighting CV1700-1710 ETHER WASH Operating instructions
-
visalighting CB6250 MASQUE Installation guide
-
XTZ 99.36 FLR Owner's manual
-
Alba STB102XI2 User manual
-
Goodmans GDB12XIT User manual
-
-
Hasbro Secret of the Sphinx Operating instructions
-
PSB Speakers HD8 User manual
-
Evil Mastermod User manual
