visalighting CB6250 MASQUE Installation guide

  • Hello! I am an AI chatbot trained to assist you with the visalighting CB6250 MASQUE Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MASQUE
CB6250
CB6252
Drawing:
760628XX
Rev:
B
Sheet:
1 of 2
Eng:
NCA
Date Drawn:
10/06/21
INSTALLATION INSTRUCTIONS
Model:
CB6250, CB6252
Fixture Family:
MASQUE
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting 2016
!
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
Make sure all connections are in accordance with the National Electrical Code and local regulations.
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
Service should be performed by qualified personnel.
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
Document Description: Installation Instructions for
MASQUE Series Luminaires
TYPICAL FIXTURE
Securely fasten Fixture Mounting Plate to the Junction Box (Fasteners & Box by others)
1.
Make all necessary wire connections according to National & Local electrical codes.
2.
Securely fasten Fixture Wirebody to Fixture Mounting Plate, with provided fasteners.
3.
Attach Shield Assembly to Fixture Wirebody
4.
Fasten Top & Bottom Lenses to Fixture Mounting Plate, with fasteners provided.
5.
TOP LENS
JUNCTION BOX
(By Others)
FIXTURE MOUNTING
PLATE
BOTTOM LENS
SHIELD ASSEMBLY
FIXTURE WIREBODY
Drawing:
760628XX
Rev:
B
Sheet:
2 of 2
Eng:
NCA
Date Drawn:
10/06/21
INSTALLATION INSTRUCTIONS
Model:
CB6250, CB6252
Fixture Family:
MASQUE
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting 2016
!
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
Make sure all connections are in accordance with the National Electrical Code and local regulations.
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
Service should be performed by qualified personnel.
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
Document Description: Installation Instructions for
MASQUE Series Luminaires
/