2. Altronix
  3. NetWay1512
NetWay1512

Altronix NetWay1512 Installation guide

  • Hello! I've reviewed the Altronix NetWay1512 and NetWay3012 Installation Guide, and I'm ready to assist you. This document covers the setup of these adapters, which convert PoE/PoE+ to 12VDC for powering non-PoE IP devices. It includes details on connections, features like the power LED indicator, and the differences between the 15W and 30W models. Feel free to ask any questions you might have about these adapters or their installation.
  • What is the output voltage of the NetWay adapters?
    What is the power output of the NetWay1512 adapter?
    What is the power output of the NetWay3012 adapter?
    Are NetWay adapters compatible with PoE+ switches?
    What compliance modes support NetWay1512 and NetWay3012?
Rev. 042109 More than just power.TM
Installing Company: _______________ Service Rep. Name: __________________________________
Address: _____________________________________________ Phone #: __________________
Installation Guide
Power over the Ethernet
Adapters for Non-PoE
Compliant IP Devices
Models Include:
NetWay1512
- 12VDC/15W adapter for non-PoE compliant IP devices
NetWay3012
- 12VDC/30W adapter for non-PoE compliant IP devices
I.T.E. 43KC
- 2 - NetWay1512 / NetWay3012 Installation Guide
Overview:
Altronix NetWay1512 and NetWay3012 adapters convert PoE or PoE+ into a 12VDC output and pass IP data.
Specifications:
Features:
Installation Instructions:
NetWay1512/NetWay3012 is compatible with PoE+ switches or midspans.
The unit is not intended to be connected to outside plant leads.
NetWay1512 for 12VDC IP Devices up to 15W:
1. Mount NetWay1512 in proximity to IP device (Fig. 1, pg. 2). Affix one side of velcro (supplied) to
NetWay1512 and place the second side of the velcro in the desired location.
2. Connect structured cable from port marked [IN] on NetWay1512 to any ports marked [OUT] of NetWay1,
NetWay8, NetWay8M, NetWay16, or NetWay16M (Fig. 1, pg. 2).
3. Connect structured cable from port marked [OUT] on NetWay1512 to the IP device (Fig. 1, pg. 2).
4. Connect 12VDC output from NetWay1512 terminals marked [+ 12VDC –] to the power input of the
IP device (Fig. 1, pg. 2). Polarity must be observed.
5. Power LED indicator will illuminate on NetWay1512 under normal conditions (Fig. 1, pg. 2).
Fig. 1
Agency Listings:
• UL 60950-1 Information Technology Equipment.
• CE European Conformity.
Additional Features:
• Power LED indicator.
• Compact insulated housing.
• Plug-and-play installation.
NetWay1512:
• 12VDC/15W adapter for non-PoE compliant
IP devices.
• PoE Mode “B” compliant.
NetWay3012:
• 12VDC/30W adapter for non-PoE compliant
IP devices.
• PoE+ Mode “A / B” compliant.
12VDC
Power to
Device
--
+
Structured Cable from
NetWay1, NetWay8,
NetWay8M, NetWay16
or NetWay16M
Structured Cable
from IP Device
Netway1512
Adapter
IN OUT
12VDC
+ Output –
I.T.E.
43KC
www.altronix.com
Brooklyn, NY, U.S.A.
NetWay1512 / NetWay3012 Installation Guide - 3 -
NetWay3012 for 12VDC IP Devices up to 30W:
1. Mount NetWay3012 in proximity to IP device utilizing mounting hole (Fig. 2, pg. 3). Use a proper fastener
and/or wall anchor when securing NetWay3012 to the wall.
2. Connect structured cable from port marked [IN] on NetWay3012 to ports marked [OUT] of NetWay8,
NetWay8M, NetWay16, or NetWay16M (Fig. 2, pg. 3).
3. Connect structured cable from port marked [OUT] on NetWay3012 to the IP device
(Fig. 2, pg. 3).
4. Connect 12VDC output from NetWay3012 terminals marked [+ 12VDC –] to the power input of the
IP device (Fig. 2, pg. 3). Polarity must be observed.
5. Power LED indicator will illuminate on NetWay3012 under normal conditions (Fig. 2, pg. 3).
Fig. 2
Power LED
12VDC Power
to Device
--
+
Structured Cable
from IP Device
Structured Cable
from PoE+
Switch or Midspan
Netway3012
Adapter
www.altronix.com
IN OUT
12VDC
+ Output ---
I.T.E. 43KC
Brooklyn, NY, U.S.A.
- 4 - NetWay1512 / NetWay3012 Installation Guide
Video Monitor
NVR/Network Server
Network Switch
NetWay1512
(Mode “B”)
NetWay1512
(Mode “B”)
NetWay1512
(Mode “B”)
NetWay3012
(Mode “A / B”)
NetWay3012
(Mode “A / B”)
12VDC
IP PTZ
12VDC
IP PTZ
12VDC
IP camera
12VDC
IP camera
12VDC
IP camera
Typical Application:
Fig. 3
Altronix is not responsible for any typographical errors.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
140 58th Street, Brooklyn, New York 11220 USA | 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty
IINetWay1512/NetWay3012 H23U MEMBER
/