2. Global Sources
  3. APP Silicone Mask
APP Silicone Mask

Global Sources APP Silicone Mask User manual

  • Hello! I am an AI chatbot trained to assist you with the Global Sources APP Silicone Mask User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Manual
Charging time: 2-3 hours
3. Working principle: The LED lamp bead is powered by a battery and can be reused
after charging. The LED mask is used with APP.
Use time: 6-8 hours
● The rated capacity of this product is 450mAh.
Input voltage/current: 5V/1A
● This product needs to be used with APP.
● Charging protection: The LED display shows the charging status of the battery pattern
when charging, and it will go out automatically when it is fully charged.
● Ultra-long life battery, up to 500 cycles or more.
Charging type: Type-c interface charging
2. Technical features:
● Use energy-saving, high-power, long-life LED lamp beads.
4. Operation:
● Press and hold the switch button for three seconds to turn on, and press and hold the switch
button again for three seconds to turn off the power.
The first step, long press to turn on the LED display and turn on the Bluetooth of the mobile
● APP controls the LED display, you can DIY input, text, pattern, music rhythm, call reminder.
1. Product information:
Battery performance: polymer battery
Screen size: 101*115mm
Product name: APP silicone mask
● Do not use this product when charging, so as not to burn the LED lights or the internal
charging parts of the power supply.
The second step is to open the APP page and click to connect to the device;
● After fully charged, please cut off the power in time to protect the battery life.
● It is forbidden to use overcharged charging (9V/2A, 12V/2A, 5V/3A, etc.).
● Keep safe charging operation.
In the third step, the device can be used together after it shows that the connection is
successful;
phone;
5. Matters needing attention:
category Features Content
Set mode
language
version
Support Chinese/Traditional/Japanese/English/German/Portugal/
Spain/French/Korean/Russian/Italian and other languages
Display
mode
Pattern
animation Various patterns/animations
Text
editor Support multi-language input
Doodle
editor Creative graffiti display
Display
mode Fixed, move left, move right, move up, move down, blink
Music
mode
Music
rhythm Music rhythm + microphone
2. Open the APP and click on the link
(keep Bluetooth and GPS turned on).
1. Scan the QR code and
install iBigMouthAPP.
iBigMouth
instruction manual
3.Multiple Bluetooth devices can be
connected at the same time.
4. Enter the main page. 5. The system comes with
a pattern.
6. The system comes with
animation.
12. Text editing and can be
saved.
7. DIY graffiti function, and
can be saved.
8. Add DIY animation and
can save.
10.Music rhythm mode. 11. Microphone rhythm mode.9. Enter the content and save
it to generate a DIY animation.
Mask-F6 601
Mask-F6 611
Mask-F6 608
Mask-F6 605
DIY input
Text input
Picture/
animation
Music rhythm
Microphone rhythm
Switch
Full screen light
switch
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
/