3M Scotch-Brite™ Roloc™ Clean and Strip XT Pro Extra Cut Disc User guide

Scotch-Brite

™

Clean & Strip Selection Guide.

Choose the right

Disc for the Job.

3M Abrasive Systems Division

3M Center, 223-06-S-3

St. Paul, MN 55144 USA

Phone 866-279-1235

Web 3M.com/abrasives

Limited Warranty & Limitation of Liability: 3M warrants this product will meet 3M specications at the time of 3M shipment. Except as required

by law, 3M MAKES NO OTHER WARRANTIES OR CONDITIONS INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. If there is a breach of this warranty, your exclusive remedy shall be product replacement or refund of purchase

price. 3M will not be liable for any direct, indirect, special, incidental, or consequential damage related to the product.

3M and Scotch-Brite are trademarks of 3M Company. Used under license by 3M subsidiaries and aliates. Please recycle. Printed in

Clean & Strip

XT Pro Extra Cut

Heavy rust and rust pits

Thick paint and coatings

Weld discoloration

and splatter

Clean & Strip

XT Pro

Mill scale

Paint and coatings

Light rust

The original

Clean & Strip

AGGRESSIVE

This manual is also suitable for

Download PDF