Barco DUET Owner's manual

Barco
Brand
Barco
Model
DUET
Type
Owner's manual
High Bandwidth Active-to-Passive Stereo Conversion
• Supports active stereo signals, with RGB bandwidth up
to 200 MHz
• No digital artefacts due to the active to passive stereo
conversion
• Compatible with all common stereo synchronisation signals
• Connects to standard common stereo sync interfaces with
Mini-DIN p3m, Mini-DIN p7m, DB9 (male and female) and
BNC connectors
Plug and Play Interface
Automatic detection and selection of:
• Left/right signal
• Resolution and refresh rate for display
• Sync polarity, composite sync, sync on green, or separate sync
• Most common stereo syncs
innovators in image processing
DUET
Active-to-Passive Stereo Converter for BARCOREALITY SIM 6
Barco’s DUET transforms a single
active stereo signal into separate
left and right channels. This
enables easy combination of active
and passive stereo in one system,
and forms a convenient way to
transfer legacy applications to
passive. The fully transparent
operation with autodetection of
the signal format and the high
bandwidth combine to make D
UET
a true Plug-and-Play interface.
Duet 03-04-2002 10:41 Pagina 1
Ref. no: R5996289 - April 2002 - Printed in Belgium
Barco Simulation Products
a business unit of BarcoProjection
US Headquarters
600 Bellbrook Ave.
Xenia, OH 45385
Phone +1 (937) 372 7579 • Fax +1 (937) 372 8645
E-mail: [email protected]
European Headquarters
Noordlaan 5, 8520 Kuurne, Belgium
Phone +32 56 36 82 11 Fax +32 56 36 84 86
E-mail: [email protected]
www.BarcoProjection.com
The information and data given are typical for the
equipment described. However any individual item
is subject to change without any notice.
BARCO Projection
Systems is an ISO 9001
registered company.
Compatibilities
• The D
UET works only with
projectors featuring "Active
Stereo Compatibility", such as:
B
ARCOREALITY SIM 6,BARCOREALITY
SIM 6 HB, BARCOREALITY SIM 6 LL,
B
ARCOREALITY SIM 6 HB MLA,
B
ARCOREALITY SIM 6 Ultra, WARP 6
TM
• The Duet is compatible with most
switching devices and 3D
graphics cards.
For an up-to-date list of
incompatible devices please
check your local Barco office.
AC Power
Built-in power supply for operation
on 240 – 100 VAC.
Power Consumption
20 Watts
Safety Regulations
The B
ARCO DUET complies with
UL 1950 and EN60950
Electromagnetic Interference
The D
UET complies with FCC part 15
Class A
Rack Mountable
Mounting holes on the cabinet
facilitate wall or rack mounting of
the interface.
Weight Lbs. Kg
Shipping 5,8 2,634
Duet 1,9 0,842
Cables 1,6 0,719
Features and Specifications
W
H
Dimensions Inch mm
Width 9.69 246
Depth 4.69 119
Height 2.24 57
Shipping Dimensions
Width 15.95 405
Depth 10.83 275
Height 8.27 210
Included Cables
and Connectors ft. m
Power Cord 240V 8.2 2.5
Power Cord 120V 8.2 2.5
MiniDIN (P3m) – MiniDIN (P3m)
5.9 1.80
MiniDIN (P3m) – BNC 6.6 2.00
DB9 – BNC 0.4 0.13
MiniDIN (P3m) – MiniDIN (P7m)
5.7 1.75
BNC–BNC connector - -
DB9 gender changer - -
Ordering Info
B
ARCO DUET R9898140
D
one double refresh rate
active stereo signal
two passive
stereo signals
Dual-stacked
B
ARCOREALITY SIM 6
Workstation with
one graphics output
Barco's DUET
one double refresh rate
active stereo signal
two passive
stereo signals
Dual-stacked
B
ARCOREALITY SIM 6
Workstation with
one graphics output
Barco's DUET
Video Inputs
• RGB: 0.4 – 2 Vpp @ 75Ω and
gain = 1
• Composite or separate sync: TTL
level (buffered loop-through) @
20 kΩ load or analog (direct
loopthrough) 0.3 to 5 Vpp
• The D9 female connector
provides the ID-bits for the
recognition of the graphical
mode.
(When no monitor is connected,
the mode can be set through ID
bits on the interface)
• Automatic 75Ω termination
Input Resolutions
• XGA 60-120 Hz
• SXGA:
60-120 Hz (reduced blanking)
60-108 Hz (standard blanking)
Stereo Inputs
• Stereo signal between –12 /+12 V
• Supported connectors are:
MiniDIN p3m, MiniDIN p7m,
DB9 (male and female),
BNC (other connectors available
on request)
Video Outputs
• RGB Analog 0.4 – 2.5 Vpp @ 75Ω
and gain = 1
• Output sync selection between
composite or separate sync
• HD15 loop through feature
Bandwidth
Typical 200 MHz @ 0.7 Vpp in /
0.7 Vpp out [-3dB]
Duet 03-04-2002 10:41 Pagina 2
  • Page 1 1
  • Page 2 2

Barco DUET Owner's manual

Barco
Brand
Barco
Model
DUET
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents