Channel Master CM-3410, CM-3412, CM-3414, CM-3418, Ultra Mini 8 Instruction Sheet

  • Hello! I am an AI chatbot trained to assist you with the Channel Master CM-3410 Instruction Sheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ChannelMaster.com
© 2020 Channel Master L.L.C. Channel Master is a registered trademark. Specications subject to change. All rights reserved. © 2020 Channel Master. Channel Master es una marca registrada. Especicaciones sujetas a cambio. Todos los derechos
reservados. © Channel Master, 2020. Channel Master est une marque déposée. Les caractéristiques peuvent être modiées sans préavis. Tous droits réservés. Pub CM34XX.IS.202004
Antenna Distribution Ampliers
Instruction Sheet
Hoja de instrucciones de la herramienta de compresión del
conector / Outil de compression de connecteur Fiche d’instructions
CM-3410, 3412, 3414, 3418
Instructions
1. Install the coaxial cable from the antenna to the “RF IN
port on the amplier.
2. Install the coaxial cable from the “RF OUT” port(s) to the
television set, set top box.
3. Connect coaxial cable between “PWR IN” port on the
antenna amplier and the power adapter coaxial port.
4. Connect the power adapter to AC voltage source.
Installation is complete.
Instrucciones
1. Instale el cable coaxial de la antena al puerto “RF IN” del
amplicador.
2. Instale el cable coaxial desde el (los) puerto (s) “RF OUT” al
televisor, decodicador.
3. Conecte el cable coaxial entre el puerto “PWR IN” del
amplicador de antena y el puerto coaxial del adaptador de
corriente.
4. Conecte el adaptador de corriente a la fuente de voltaje de CA.
La instalación está completa.
Instructions
1. Installez le câble coaxial de l’antenne au port «RF IN» de
l’amplicateur.
2. Installez le câble coaxial entre le (s) port (s) «RF OUT» et le
boîtier décodeur du téléviseur.
3. Connectez le câble coaxial entre le port «PWR IN» de
l’amplicateur d’antenne et le port coaxial de l’adaptateur
d’alimentation.
4. Connectez l’adaptateur secteur à la source de tension CA.
L’installation est terminée.
CM-3410
1-Port HDTV Signal Amplier
Amplicador de 1 puerto
Amplicateur 1 port
CM-3412
2-Port HDTV Signal Amplier
Amplicador de 2 puerto
Amplicateur 2 port
CM-3414
4-Port HDTV Signal Amplier
Amplicador de 4 puerto
Amplicateur 4 port
CM-3418
8-Port HDTV Signal Amplier
Amplicador de 8 puerto
Amplicateur 8 port
Contents:
All HDTV Signal Ampliers include:
Amplier
Power Supply
Coaxial Cable Jumper
Instruction Sheet
From Antenna
To TV #1
To TV #2
Fig 2
Power
Supply
From Antenna
To TV #1
To TV #2
To TV #3
To TV #4
Fig 3
From Antenna
To TV #1
Fig 1
Power
Supply
Power
Supply
From Antenna
Fig 4
To TV #1
To TV #5
To TV #2
To TV #6
To TV #3
To TV #7
To TV #4
To TV #8
Power
Supply
For Product Warranty information please visit us online at www.channelmaster.com/warranty
ChannelMaster.com
© 2020 Channel Master L.L.C. Channel Master is a registered trademark. Specications subject to change. All rights reserved. © 2020 Channel Master. Channel Master es una marca registrada. Especicaciones sujetas a cambio. Todos los derechos
reservados. © Channel Master, 2020. Channel Master est une marque déposée. Les caractéristiques peuvent être modiées sans préavis. Tous droits réservés. Pub CM34XX.IS.202004
/