Danfoss NovoCon® M actuator is a versatile device that can be used for a wide range of heating and cooling applications. It features digital and analog control, and can be controlled via BACnet MS/TP, Modbus RTU, 0-10V, or 0-20mA signals. With its powerful 550N force, 20 mm stroke, and 3-24s/mm speed, it can handle even the most demanding applications. The NovoCon® M actuator is also highly configurable, with DIP switches for addressing and bus protocol selection, making it easy to integrate into any system. Additionally, it has an IP54/40 rating, making it suitable for use in harsh environments.
Danfoss NovoCon® M actuator is a versatile device that can be used for a wide range of heating and cooling applications. It features digital and analog control, and can be controlled via BACnet MS/TP, Modbus RTU, 0-10V, or 0-20mA signals. With its powerful 550N force, 20 mm stroke, and 3-24s/mm speed, it can handle even the most demanding applications. The NovoCon® M actuator is also highly configurable, with DIP switches for addressing and bus protocol selection, making it easy to integrate into any system. Additionally, it has an IP54/40 rating, making it suitable for use in harsh environments.
Danfoss NovoCon® M actuator is a versatile device that can be used for a wide range of heating and cooling applications. It features digital and analog control, and can be controlled via BACnet MS/TP, Modbus RTU, 0-10V, or 0-20mA signals. With its powerful 550N force, 20 mm stroke, and 3-24s/mm speed, it can handle even the most demanding applications. The NovoCon® M actuator is also highly configurable, with DIP switches for addressing and bus protocol selection, making it easy to integrate into any system. Additionally, it has an IP54/40 rating, making it suitable for use in harsh environments.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI