Ecler ENVIRO ATI50-ATR3-ATR6-SL4 User manual

Ecler
Brand
Ecler
Model
ENVIRO ATI50-ATR3-ATR6-SL4
Type
User manual
Page is loading ...
Page is loading ...
ATR3/ATR6/ATI50
50.0032.01.01 1/2
ATTENUATORS
ATR3/ATR6/ATI50
FUNCTION
Attenuates the volume of the depending speakers.
DESCRIPTION
100 V line input (IN). 100 V line output (OUT) to be connected directly to the speakers. 24 V power supply input (DC24) for the
relay (switches off the attenuator in case of a high priority message)
Resistive attenuator for output powers of 3 W and 6 W (ATR3 and ATR6, respectively). For output powers of 50 W an inductive
attenuator (ATI50) is needed. For correct operation, the total sum of power ratings of the speakers connected to a resistive
attenuator must be the same as the power rating of the attenuator itself (3 or 6 W with a tolerance of ± 1 W). If this is not the
case, the actual attenuation will not match the attenuators position. The inductive attenuator type will adapt itself to the load
installed (from 0 to 50 W). In installations where the total power rating is unknown, it’s recommended to use this attenuator
(ATI50).
FEATURES
INPUTS: IN: Input from an amplifier or program selector.
DC24: Input from the relays’ power supply module.
OUTPUT: OUT: Direct output to the speakers.
ATR3/ATR6/ATI50 WIRING
Component side view
3 and 6W resistive attenuator: ATR3/ATR6
Component side view
50W inductive attenuator: ATI50
24 V power +
input for the -
relay
100 V input from
- amplifier or
+ program selector
- 100 V output
+ to speakers
- 100 V input from
+ amplifier or
program selector
100 V output -
to speakers +
24 V power -
input for the +
relay
SL4
2/2 50.0032.01.01
SELECTOR
SL4
FUNCTION
Allows selecting one of four inputs.
DESCRIPTION
Four 100 V line inputs (BGM1, BGM2, BGM3 and BGM4) coming from an amplifier are available. 100 V output line (OUT) to be
directly connected to the speakers or to an attenuator in case you wanted to attenuate the line.
FEATURES
INPUTS: BGM1: Line input 1 from the amplifier.
BGM2: Line input 2 from the amplifier.
BGM3: Line input 3 from the amplifier.
BGM4: Line input 4 from the amplifier.
OUTPUT: OUT: Direct output to the speakers or to an attenuator.
SL4 WIRING
Component side view
100 V output to +
the speakers or -
attenuator
+ Line input 4 from the
- amplifier
+ Line input 3 from the
- amplifier
+ Line input 1 from the
- amplifier
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Ecler ENVIRO ATI50-ATR3-ATR6-SL4 User manual

Ecler
Brand
Ecler
Model
ENVIRO ATI50-ATR3-ATR6-SL4
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents