POLYWOOD PWS138-1-WH Operating instructions

POLYWOOD
Brand
POLYWOOD
Model
PWS138-1-WH
Type
Operating instructions

This manual is also suitable for

B - .27 X 3 SOCKET WAFER A
12
9/13/2012
ASSEMBLY INSTRUCTIONS
Attach seat using (2) .27x2 1/2" screws
Qty. Description
using (4) .27x3” screws.
Note: front of seat is wider
Model: R100
Repeat step 1 on other side
Insert head piece into top of post
__(1) Back
__(1) Seat
__(1) Long brace
__(1) Short brace
__(1) Head piece
__(1) Hardware pack
__(2) Sideframes
__(2) Rocker bottoms
Step 1
Attach long brace, short brace and back
Step 2
Step 3
Attach rocker bottom with (4) 14x3" screws
TOOLS NEEDED
4MM HEX KEY, SHORT, FOR DRILL
INCLUDED
Seat frame
sideframe
back frame
Long brace
A
B
BB
A
Short brace
B
HARDWAREISCOATEDSTAINLESSSTEELUNLESSOTHERWISESPECIFIED
NOTE:
Partialy thread both
screws
into post before tightening.
Rocker bottoms may require
some
flexing for proper fit.
Head
4MM HEX KEY, ALLEN, T-HANDLE
INCLUDED
A - .27 X 2-1/2 SOCKET WAFER A
4
9/17/2012
ASSEMBLY INSTRUCTIONS
Step 1
Model: TWST, BST
Description
without pilot holes
Qty.
A screw gun is required
Phillips head screwdriver
__(1) Hardware pack
Uses (4) 8x3 screws
__(2) Leg assembly
by resting tray on the leg assemblies
8
TOOLS NEEDED
__(2) Trays
Attach a tray to the middle of the leg assemblies
Note:
Trays do not have pilot holes.
Screws go directly into Polywood
ALL HARDWARE IS COATED STAINLESS STEEL
A - 8 X 3 PHIL FLAT SCREW
Step 2
Attach other tray to the top of the leg
assemblies.
Uses (4) 8x3 screws
  • Page 1 1
  • Page 2 2

POLYWOOD PWS138-1-WH Operating instructions

POLYWOOD
Brand
POLYWOOD
Model
PWS138-1-WH
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents