Savant RCC1000-SA Reference guide

RCC1000-SA
Savant
Brand
Savant
Model
RCC1000-SA
Type
Reference guide

This manual is also suitable for

Product Notification - RCC MK2 Series Subwoofers
009-1951-01 RCC MK2 Series Product Notification
Copyright ©2020 Savant Systems, LLC | 200610
45 Perseverance Way, Hyannis MA 02601 | 508.683.2500
www.savant.com/artisonspeakers
IMPORTANT!
Artison RCC MK2 Series Subwoofers are designed to be powered by the RCC1000-SA Subwoofer Amplifier.
The RCC1000-SA utilizes preset DSP equalization for flat frequency response when used with the RCC MK2
Series, and can power up to 8 (4 pairs) of the smaller RCC160-MK2-PC, or up to 4 of the larger RCC320-
MK2-PC/R Subwoofers for a truly distributed bass system.
During system configuration, DO NOT mix RCC MK2 Series and legacy RCC Series Subwoofers on the same
parallel output of the RCC1000-SA Amplifier. Doing so may cause undesirable behavior, due to the dierent
types of DSP equalization used by the amplifier for these product lines.
Refer to the table below to confirm the exact products within each series of subwoofer:
RCC MK2 Series Legacy RCC Series
– RCC320-MK2-PC
– RCC320-MK2-R
– RCC160-MK2-PC
– RCC320-PC
– RCC320-R
– RCC640-PC
– RCC640-R
For further inquiries related to product compatibility:
• Contact a licensed Savant Dealer: https://www.savant.com/find-an-integrator
• Or submit a Savant Support case via the Savant Customer Community
  • Page 1 1

Savant RCC1000-SA Reference guide

RCC1000-SA
Savant
Brand
Savant
Model
RCC1000-SA
Type
Reference guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents