ROSSLARE ENTERPRISES Rosslare AY-H6355BT Multi Format Reader User manual

Brand: ROSSLARE ENTERPRISES

Model: Rosslare AY-H6355BT Multi Format Reader

Type: User manual

Technical Specifications Rosslare AY-X6355

Part number

AYC-H6355BT

Power supply

8 – 16 VDC regulated power supply

Dimensions

120 x 76 x 21.5 mm 430g

Current at

12VDC

Standby 145 mA, Maximums: 200 mA

Protection

IP65

Tamper Output

Open collector, active low, max. sink

current 16 mA

Operating and

Storage Temp

-35°C to +66°C

Relative

humidity

10% ... 95% non-condensing

Reader Data Output

Formats

CSN Wiegand 26-Bit and keypad with

eight common output formats

RS485 – OSDP

Operating

Environment

Weather-resistant, UV-resistant, meets

IP65, epoxy-potted, suitable for indoor and

outdoor use

Control Inputs

Dry Contact, N.O.

Warranty

3 year Limited Procut Warranty

Read range

5 cm (2.5 in)

Tamper Option

Optical Tamper

The AY-H6355BT reader is capable of reading the CSN of the most popular 13.56 MHz smart cards

in the security industry, as well as NFC-ID from Rosslare’s APP-1Ax55 Android NFC Credential

App, and BLE-ID from Rosslare’s Bluetooth BLE-ID Credential App for Android and iOS

smartphones. Dual authentication is available when both RFID smart cards, BLE-ID and NFC-ID

are combined with a keypad PIN entry.

The reader output is in Wiegand format, with selectable bit lengths from 26-Bit to 64-Bit, on a

standard Wiegand wired connection, and four individual control

lines provide green LED control, red LED control, and buzzer control inputs. It features optical

tamper detection with a dedicated output, and the operation of the above parameters may be

configured using configuration cards. The AY-H6355BT supports connection with host controllers

that support the Open Standard Device Protocol (OSDP).

Rosslare AY-H6355BT

S110667

Key Features:

• Selectable between OSDP and Wiegand via dipswitch

• Addressable OSDP connectivity, up to 32 addresses using

DIP switches

• NFC Android Smartphone is supported with the Android

App for Host Card Emulation (HCE)

• Read the CSN from the following smart cards: Mifare

(Classic,Plus,DESFire),HID iClass, Sony,FeliCa, NFC

• IP65 Rated

• BLE-ID is supported with Rosslare BLE-ID Credential apps

for iOS and Android OS

Rosslare

Contactless Smart Card Reader

with keypad

ROSSLARE ENTERPRISES Rosslare AY-H6355BT Multi Format Reader User manual

ROSSLARE ENTERPRISES Rosslare AY-H6355BT Multi Format Reader User manual

ROSSLARE ENTERPRISES Rosslare AY-H6355BT Multi Format Reader User manual

Related papers

Other documents