R
2:1(5 6 0$18$/
7)7/&' 7(/(9,6,21
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
LE32T3/LE40T3
HBTV-32D02FD/HBTV-40D02FD
LE32A300/LE42A300/LE55A300
HBTV-32L01HD/HBTV-42L01FD/
HBTV-55D02FD
Warning
1 TV LED Owner’s Manual
Warning/Safety
WARNING
!
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
*
To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any
accessory inside the casing.
*
lf necessary, please contact authorized after-sales services.
*
A lighting ash mark in a triangle: A potentially hazardous situation, which, if not avoided, could result in
serious injury by high voltage.
*
An exclamation mark in a triangle: Major part or accessory of which technical specications must be followed if
it is to be replaced.
RISK ELECTRIC SHOCK
DO NOT OPEN
WARNING: To avoid fire or electric hazards, never place your television receiver in an area with heavy moisture.
Attention should be paid to avoid accidental scratches or impacts onto the screen.
CAUTION:
Please read this manual carefully before using your television and keep this manual in a good place for future •
reference.
To achieve the best performance of your television, read this User’s Manual carefully and properly store it for future •
reference.
Information of screen displays and figures in the User’s Manual may vary due to technical innovations. •
Unauthorized disassembly of this product is prohibited. •
Important Safety Instructions
1.The product should be tightly xed to avoid drop damages and even re.
2.To avoid re hazards, do not use this product under direct sunlight or closely to heat sources.
3.Do not locate the product close to water or oil, which may cause re hazards.
4.Unplug the power supply and antenna of the product when there is a rainstorm, especially thunderstorm.
5.Do not use damaged or worn electric plugs, and keep electric cord away from heat sources to avoid electric shocks or
re hazards.
6.Do not connect excessive sockets in parallel or share the same socket by multiple plugs to avoid re hazards.
7.The product must be placed on a solid and stable surface to avoid collapse.
8.Unanthorized disassembly of the television is prohibited to avoid electric shocks or re hazards, contact authorized
aftersales serivce if technical serivce is needed.
9.Keep the product away from a transformer or heat source to avoid re hazards.
10.Disconnect the product from power supply and contact authorized after-sales service if abnormal sound is heard in
the product.
11.Do not use or store inammable materials near the product to avoid explosion or re hazards.
12.Do not place the product in a humid area to avoid re hazards.
13.The antenna of the product should be away from electric cable to avoid electric shocks.
14.Never touch the plug when your hand is wet as this might cause electric shocks.
15.Always make sure that the television is well plugged as poor electric connection might cause re.
16.When antenna is used, measures should be taken to prevent water from owing down along the cable into the
television.
17.Unplug the television, use soft fabric, never chemicals, if you are going to make cleaning of the product, Make sure
that no water drops in the product.
18.The plug and electric cable must be kept clean to avoid electric shocks or re hazards.
19.Disconnect the television from power supply and antenna when there is a rainstorm or thunderstorm to avoid
electric shocks or re hazards.
20.Disconnect the television from power supply to avoid electric shocks or re hazards in a long vocation.
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Contents
TV LED Owner’s Manual 2
Contents
How to customize your own picture status .............. 11
Sound menu .......................................................12
How to select sound mode ............................................. 12
How to Customize your own sound status ............... 12
Channel menu ....................................................12
Auto Tuning .......................................................................... 13
DTV Manual Tuning ........................................................... 13
ATV Manual Tuning ............................................................ 13
Programme Edit .................................................................. 14
Singnal Information .......................................................... 14
Programme Guide .............................................................. 14
Time menu..........................................................14
Option menu ......................................................14
Lock menu ..........................................................15
Tuning Lock .......................................................................... 15
Set Password ........................................................................ 15
Block Program ..................................................................... 15
Parental Guideance ........................................................... 15
Clear Lock .............................................................................. 15
PC Set ..................................................................15
USB Mode ...........................................................16
Maintenance 18
Specification 19
Format 19
Troubleshooting 20
Warning 1
Important Safety Instructions 1
Introduction 3
Controls ................................................................ 3
Connection Options ............................................4
Remote control ....................................................5
Installation 6
External Equipment Connections ...................... 6
Accessories ..............................................................................6
Antenna Connection ............................................................6
Choose Your Connection ....................................................7
Connecting a VCR ..................................................................7
External AV Source Setup ...................................................7
Connecting a DVD player ...................................................7
Connecting a DTV (digital TV) ..........................................8
Connecting a digital audio output .................................8
Connecting a computer ......................................................9
HDMI and DVI input .......................................................... 10
Operation 10
Switching On/O the TV set ........................................... 10
Choose the Menu Language .......................................... 10
Choose the Input source ................................................. 11
Picture menu ......................................................11
How to select picture mode ........................................... 11
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Introduction
3 TV LED Owner’s Manual
Introduction
Controls
TV Side panel controls and connections
LOV
HC
UNEM
TV/AV
1
2
3
4
5
1
TV/AV (INPUT)
Press this key to open/close signal source
options menu.
2
MENU
Menu display. Press to access the on-screen
menu display.
3
VOL +/-
Press to adjust the volume. In the MENU screen,
these buttons serve as right/left buttons.
4
CH +/-
Press to scan through channels. To scan quickly
through channels, press and hold down either
+/- . In the MENU screen, these buttons serve
as up/down buttons.
5
POWER
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Note:HBTV-32L01HD/HBTV-42L01FD/HBTV-55D02FD “INPUT”
Introduction
TV LED Owner’s Manual 4
HDMI1 IN
ANT IN
(AIR)
ANT IN
(CABLE)
DIGIT
AL AUDIO OUT
(OPTICAL)
USB
A
UDIO
COMPONENT1 IN
L
YPb
Pr
R
VIDEO VIDEO
AUDIO
AV OUT AV IN COMPONENT2 IN PC IN HDMI3 IN
HDMI2 IN
L
R
L
R
L
R
YP
b
P
r
AUDIO AUDIO
PC PC/DVI AUDIO
1 2 3 4 5
6 7
8
9
10
11
12
13
14
15
16
1
AV OUT
Connect the
audio
L/R and video cables
to your
other video equipment
.
2
AV In
Connect the AV signal from a video device to
this jack.
3
Component 2
Video In
Connect a component video device to this jack.
4
Component 2
Audio In
Connect the audio L/R cables from the
component video signal source to this jack.
5
PC Video In
Connect a video cable from a computer to this
jack.
6
PC/DVI Audio
In
Connect the audio L/R cables from a computer
to this jack.
7
HDMI3 In
Connect a HDMI device to receive digital audio
and uncompressed digital video.
8
HDMI2 In
Connect a HDMI device to receive digital audio
and uncompressed digital video.
9
HDMI1 In
Connect a HDMI device to receive digital audio
and uncompressed digital video.
0
Component1
Video In
Connect a component video device to this jack.
A
Component1
Audio In
Connect the audio L/R cables from the
component audio signal source to this jack.
B
Antenna
Input
Connect RF antenna to this jack.
C
Cable Input
Connect cable signals to this jack.
D
Headphone
jack
Headphone audio output terminal.
E
Digital Audio
Output
Connect various types of digital audio
equipment.
F
USB jack
Connect USB storage device to this jack.
Connection Options
Back panel connections
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Introduction
5 TV LED Owner’s Manual
Remote control
The remote control cannot be operated unless the batteries are properly loaded.
When using the remote control, aim it at the remote sensor on the TV.
1
Power
2
INPUT Show the input source
3
MTS/SAP Select MONO, STEREO, SAP
4
CCD (closed caption) Select a closed caption option
5
P.SIZE
Select the aspect ratio
6
H.LOCK Hotel Lock button
7
• button
Press to select digital channels. For example, to enter “54-3”,
press “54”, “• ” and “3”
8
MUTE
9
VOLUME UP/DOWN
Press to adjust the volume
0
MENU
Press to open the on-screen menu
A
Thumbstick (Up/Down/
Left/Right)
Allows you to navigate the on-screen menus and adjust the
system settings to your preference
B
SOUND
C
Color button
Press to operate the Functions in GUIDE/Program Edit/Block
Program/USB
D
G
I
X
Thunbstick(USB)
Allows you to navigate the on-screen menus in USB function,and
17 for Previous, 34 for Next;
E
REV Fast Reverse (Only for USB)
F
ENTER
H
Play/Pause button (Only for USB)
J
USB Press to switch input source to USB in
K
DNR
Digital Noise Reduction
L
SLEEP button
Press to display the sleep timer option
M
CH.LIST
Open the channel list in TV
N
FAVORITE
Open the favourite channel list in TV
O
Number buttons
Press to change a channel
P
INFO
Q
Q.VIEW Press to jump back and forth between two channels
R
CHANNEL UP/DOWN
Channel selection(up/down)
S
Q.MENU Adjust some functions in common use
T
OK
Accesses the highlighted item in the on-screen menu
U
PICTURE
Press repeatedly to cycle through the available picture modes
V
FWD
Fast forward(only for USB)
W
GUIDE
Display the guide when you are watching digital channels
Y
EXIT
Clears all on-screen displays and returns to TV viewing from any
menu
Z
REPEAT
Replay a music or movie
[
ZOOM
Press to magnify/minify an image
ENTER
ZOOM
OK
GUIDE
EXIT
REPEAT
INPUT
MTS/SAP
INFO
MUTE
VOL CH
MENU
Q.MENU
SOUND
PICTURE
Q.VIEW
P.SIZE H.LOCK
FAVORITE
CH.LIST
CC
DNRSLEEP
USB
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Installation
TV LED Owner’s Manual 6
Installation
External Equipment Connections
Accessories
Remote control Owner’s manual
Antenna Connection
Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning.
AN
TIN
VHF Antenna
UHF Antenna
Turn clockwise to tighten
Bronze Wire
Be careful not to bend the bronze wire
when connecting the antenna.
Bronze Wire
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna
Socket
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor Antenna
To improve the picture quality in a poor signal
area, please purchase a signal amplier and install
properly.
If the antenna needs to be split for two TV’s, install a
“2-Way Signal Splitter” in the connections.
To install the antenna properly please contact a
professional in your area.
Note
All cables shown are not included with the TV.✲
PLAY/PAUSE
REV
REPEAT
GUIDE
MTS/SAP
CCD ARC
FREEZE
ENTER
STOPUS RBEC
PREV NEXT
CH.LIST
FAVORITE
TV
STB
INPUT
MUTE
VOL CH
MENU
SLEE DPISPLAY
EXIT
RECALL
PICTURE AUDIO PC HDMI
CABLE VCR AUD
DVD
ANT I
N
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Installation
7 TV LED Owner’s Manual
Choose Your Connection
There are several ways to connect your television,
depending on the components you want to connect
and the quality of the signal you want to achieve. The
Connecting a VCR
To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
HDMI1 IN
ANT IN
(AIR)
AUDIO
COMPONENT1 IN
L
YPb P
r
R
VIDEO VIDEO
AUDIO
AV OUT AV IN COMPONENT2 IN PC IN HDMI3 IN
HDMI2 IN
L
R
L
R
L
R
YP
b Pr
AUDIO AUDIO
PC PC/DVI AUDIO
yellow
yellow
red
red
white
white
1
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
Connection Option 2
Connect the audio and video cables from the VCR’s
output jacks to the TV input jacks, as shown in the
gure. When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
Insert a video tape into the VCR and press
PLAY on
the VCR. (Refer to the VCR owner’s manual.)
Select the input source with using the
INPUT button
on the remote control, and then press
/
button
to select the source, press OK button to conrm.
External AV Source Setup
How to connect
Connect the audio and video cables from the •
external equipment’s output jacks to the TV input
jacks, as shown in the gure.
When connecting the TV to external equipment, •
match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
HDMI1 IN
ANT IN
(AIR)
AUDI
O
COMPONENT1 IN
L
YPb Pr
R
VIDEO VIDEO
AUDIO
AV OUT AV IN COMPONENT2 IN PC IN HDMI3 IN
HDMI2 IN
L
R
L
R
L
R
YP
b Pr
AUDIO AUDIO
PC PC/DVI AUDIO
yellow
yellow
red
redwhite
white
Video Game Set
Camcorder
How to use
Select the input source with using the INPUT button
on the remote control.
Press
/
button to select the desired source.
Press
OK button to conrm.
Operate the corresponding external equipment.
Connecting a DVD player
How to connect
Connect the DVD video outputs (COMPONENT) to
the Y Pb Pr jacks on the TV and connect the DVD
audio outputs to the YPbPr Audio IN jacks on the TV,
as shown in the gure.
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Installation
TV LED Owner’s Manual 8
HDMI1 IN
ANT IN
(AIR)
AUDIO
COMPONENT1 IN
L
YPb Pr
R
VIDEO VIDEO
AUDIO
AV OUT AV IN COMPONENT2 IN PC IN HDMI3 IN
HDMI2 IN
L
R
L
R
L
R
YP
b Pr
AUDIO AUDIO
PC PC/DVI AUDIO
green
green
red
blue
blue
red
red
red
white
white
green
green
red
blue
blue
red
red
red
white
white
DVD
How to use
Turn on the DVD player, insert a DVD disc.A
Use B INPUT button on the remote control to select
component mode.
Press
C PLAY button on external equipment for
program play.
Refer to the DVD player’s manual for operating
D
instructions.
Component Input ports Q
To get better picture quality, connect a DVD player to
the component input ports as shown below.
Component ports on the TV Y Pb Pr
Video output ports on DVD
player
Y
Y
Y
Y
Pb
B-Y
Cb
P
B
Pr
R-Y
Cr
P
R
Connecting a DTV (digital TV)
This TV can receive Digital Over-the-air signals without
an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital
external device, refer to the figure as shown below.
This TV supports HDCP (High-bandwidth Digital
Contents Protection) protocol for Digital Contents
(480p,720p,1080i).
How to connect
Use the TV’s COMPONENT, VGA or HDMI jack for •
video connections, depending on your set-top box
connector. Then, make the corresponding audio
connections.
HDMI1 IN
ANT IN
(AIR)
AUDIO
COMPONENT1 IN
L
YPb Pr
R
VIDEO VIDEO
AUDIO
AV OUT AV IN COMPONENT2 IN PC IN HDMI3 IN
HDMI2 IN
L
R
L
R
L
R
YP
b Pr
AUDIO AUDIO
PC PC/DVI AUDIO
green
green
red
blue
blue
red
red
red
white
white
Digital Set-top Box
or
oror
How to use
Turn on the digital set-top box. (Refer to the owner’s A
manual for the digital set-top box.)
Use INPUT on the remote control to select
B
COMPONENT, VGA or HDMI source.
Signal COMPONENT HDMI
480i Yes Yes
480p Yes Yes
720p Yes Yes
1080i Yes Yes
1080p Yes Yes
Connecting a digital audio output
Send the TV’s audio to external audio equipment (stereo
system) via the Digital Audio Output (Optical) port.
How to connect
Connect one end of an optical cable to the TV Digital A
Audio (Optical) Output port.
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Installation
9 TV LED Owner’s Manual
Connect the other end of the optical cable to the B
digital audio (optical) input on the audio equipment.
See the external audio equipment instruction
manual for operation.
Note
When connecting with external audio equipments, R
such as amplifers or speakers, please turn the TV
speakers o.
!
Caution:
Do not look into the optical output port. Looking •
at the laser beam may damage your vision.
Connecting a computer
How to connect
To get the best picture quality, adjust the VGA A
graphics card to 1280s1024.
Use the TV’s VGA or DVI (Digital Visual Interface) B
Audio IN port for audio connections, depending on
your computer connector.
If the graphic card on the computer does not •
output analog and digital RGB simultaneously,
connect only one of either VGA IN or HDMI IN to
display the VGA on the TV.
If the graphic card on the computer does output •
analog and digital RGB simultaneously, set the TV
to either VGA or HDMI; (the other mode is set to
Plug and Play automatically by the TV.)
Then, make the corresponding audio connection.
C
If using a sound card, adjust the VGA sound as
required.
HDMI1 IN
ANT IN
(AIR)
AUDIO
COMPONENT1 IN
L
YPb Pr
R
VIDEO VIDEO
AUDIO
AV OUT AV IN COMPONENT2 IN PC IN HDMI3 IN
HDMI2 IN
L
R
L
R
L
R
YP
b Pr
AUDIO AUDIO
PC PC/DVI AUDIO
Computer
How to use
Turn on the computer and the TV.A
Use INPUT on the remote control to select VGA or B
HDMI source.
Check the image on your TV. There may be noise
C
associated with the resolution, vertical pattern,
contrast or brightness in VGA mode. If noise
is present, change the VGA mode to another
resolution, change the refresh rate to another rate
or adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the VGA
graphic card can not be changed, change the VGA
graphic card or consult the manufacturer of the VGA
graphic card.
Note
Use a DVI cable. R
Avoid keeping a fixed image on the TV’s screen R
for a long period of time. The fixed image may
become permanently imprinted on the screen.
The synchronization input form for Horizontal and R
Vertical frequencies is separate.
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Installation/Operation
TV LED Owner’s Manual 10
HDMI and DVI input
When the source device (DVD player or Set Top Box)
supports HDMI
How To Connect
Connect the source device to HDMI port of this TV A
with an HDMI cable (not supplied with this product).
No separated audio connection is necessary.
B
How To Use
If the source device supports Auto HDMI function, •
the output resolution of the source device will be
automatically set to 1280s720p.
If the source device does not support Auto HDMI, •
you need to set the output resolution appropriately.
To get the best picture quality, adjust the output
resolution of the source device to 1280s720p.
Select HDMI input source in input source option of •
Select Main source menu.
When the source device (DVD player or Set Top Box)
supports DVI
How To Connect
Connect the source device to HDMI port of this TV A
with a HDMI-to-DVI cable (not supplied with this
product).
A separated audio connection is necessary.
B
If the source device has an analog audio output C
connector, connect the source device audio output to
DVI Audio In port located on the left side of HDMI port.
How To Use
If the source device supports Auto DVI function, •
the output resolution of the source device will be
automatically set to 1280s720p.
If the source device does not support Auto DVI, you •
need to set the output resolution appropriately.
To get the best picture quality, adjust the output
resolution of the source device to 1280s720p.
Press the • INPUT button to select HDMI input source
in input source option of Select Main source menu.
Operation
In the manual, the OSD (on screen display) may be
dierent from your TV’s, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in
order for your TV to work properly. Read the instructions
that follow.
Switching On/O the TV set
First, connect power cord correctly.A
Select the viewing source by using B INPUT button on
the remote control.
When finished using the TV, press
C POWER button on
the remote control. The TV reverts to standby mode.
If you intend to be away on vacation, disconnect the
D
power plug from the wall power outlet.
Note
If the TV in power on , the screen show information R
according the type of input signal. If there is no
signal, “No Signal” will display on the screen.
Choose the Menu Language
When you start using your set for the first time, you must
select the language which will be used for displaying
menus and indications.
Choose
A TV Input and then press MENU button.
Press
B
/
button to select Option menu.
Press C
/OK button and then use
/
button to
select Language.
PressD
/
button to select language.
( English or Portugues)
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Operation
11 TV LED Owner’s Manual
Choose the Input source
Change the picture source so you can watch your TV,
VCR, Cable , or any other devices that are connected to
your TV.
Press INPUT button to enter the Input Source menu
and then use
/
button to select the desired
items (Air, Cable, AV,Component1, Component2,
PC, HDMI1, HDMI2, HDMI3, USB).
Press OK button to conrm .
Picture Menu
The TV menu gives you an overview of the menus you
can select.
Note
Depending on the input signal, one or more menu 2
items may not be selectable.
How to select picture mode
The picture mode provides the pre-dened images
settings:
Standard, Mild, Dynamic and User
.
Press
MENU button and then use
/
button to
select Picture menu.
Press
/
OK
button and then use
/
button to
select Picture Mode.
Press
/
button to select the option
Standard,
Mild, Dynamic and User,Eye Guard.
.
You can also press PICTURE button on the remote control
to select the option Standard, Mild, Dynamic and User,
Eye Guard.
How to customize your own picture status
Press MENU button and then use
/
button to
select Picture menu.
Press
/OK
button and then use
/
button to
select the desired items.
Press
/
button to adjust the setting.
Picture Mode9
Select the mode of picture:
Standard, Mild, Dynamic
and User
.
Contrast9
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Brightness9
This will adjust the light output of the complete
the picture.
Color9
This will adjust the saturation level of the colors to suit
your personal preference.
Sharpness9
This will adjust the sharpness of ne details in the
picture.
Note
The picture options can only be adjusted in the 2
User mode. The other picture modes are preset.
Tint9
Allows you to select the color mix (Tint) of the picture.
Color temperature9
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
PVR File system
EYE GUARD MODE Off
Operation
TV LED Owner’s Manual 12
status
Press A MENU button and then use
/
button to
select Audio menu.
Press
B
/OK
button and then use
/
button to
select desired items.
Press
C
/
button to adjust the setting.
Sound Mode: Y To adjust the audio mode:
Standard, Music, Movie and User.
Equalizer: Y
To adjust the equalizer.
Balance: Y Adjust to emphasize left or right speaker
balance.
SPDIF Mode: Y
To adjust the SPDIF output: On or O.
AVL Y
To adjust the audio volume
On or O.
SRS TS XT Y
To turn the simulated surround sound
On or O.
MTS/SAP : This TV can receive MTS stereo programs and
SAP (Secondary Audio Program) that accompanies the
stereo program.( if the station transmits an additional
sound signal as well as the original one.)
When having selected
MTS/SAP button on the remote
control, this TV can only receive the signal when the TV
station transmits the proper signals.
Mono sound is automatically received if the broadcast is only
in Mono; even though Stereo or SAP has been selected.
Select Mono if you want to listen to mono sound during
stereo/ SAP broadcasting. Stereo or SAP can be received
in a Analog channel.
Use
A MTS/SAP button to select your desired MTS
mode in a analog signal.
Each time you press •
MTS/SAP
button, Mono,
Stereo or SAP appear. If other languages are
available on the digital signal, select them with the
MTS/SAP
button.
Press B EXIT button to save and return to TV viewing.
Channel menu
Display channel menu by pressing INPUT button then
This will increase or decrease Warm (red) and Cool
(blue) colors to suit personal preferences.
Select Cool to give the white colors a blue tint,
Standard to give the white colors a neutral tint, Warm
to give the white colors a red tint.
Aspect Ratio Y
To change the aspect ratio: Full Screen, 4:3, Auto,
Cinema, Zoom and just scan.
You can also press P.SIZE button on the remote control to
select the option.
DNR Y
Automatically lters out and reduces the image
noise and improves picture quality when receiving
weak video signals: On or O.
Backlight Y
To adjust the brightness of Backlight.
Sound menu
How to select sound mode
Press A MENU button and then use
/
button to
select Sound menu.
Press
B
/OK
button and then use
/
button to
select Sound Mode.
Equalizer
L
PressC
/
button to select the option Standard,
Music, Movie and User.
You can also press • SOUND button on the remote
control to select the Audio Mode: Standard, Music,
Movie and User.
How to Customize your own sound
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Operation
13 TV LED Owner’s Manual
use
/
button to select the source of Air or Cable
item.
Press
A MENU button and then use
/
button to
select Channel menu.
Press
B
/ OK button to enter the menu and then use
/
button to select the desired option.
Auto Tuning
Press A MENU button and then use
/
button to
select Channel menu.
Press
B
/ OK button and then use
/
button to
select Auto Tuning, then press OK the menu opens.
PressC
/
button to select Start, press
OK
button
to start to scan. Press MENU button to return to the
previous menu, press EXIT button to EXIT the menu
screen.
All channels now available will be automatically preset in
order .After the search has nished, the rst program
number will display on the screen. This search
automatically adds only the active channels in your area
to the TV's memory.
It deletes any channels on which there is no broadcast or
a poor signal.
The channels found are automatically saved.
DTV Manual Tuning
PressA
/ OK button and then use
/
button to
select DTV Manual Tuning, then press OK the menu
opens.
Press
B
/
button to select the channel , press OK
to search.
ATV Manual Tuning
PressA
/ OK button and then use
/
button to
select ATV Manual Tuning, then press OK the menu
opens.
Press
B
/
button to select the channel , press
/
button to adjust, and then press OK button
to conrm.
Programme Edit
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Operation
TV LED Owner’s Manual 14
Press
/ OK button and then use
/
button to
Programme Edit , then press OK the menu opens.
Press
/
button to select the channel, press
the green FAV button on the remote control, the
channel with a check icon is a favorited channel.
Press the red SKIP button on the remote control, the
channel with a check icon is a skippe
d channel.
Singnal Infomation
Press to display the singnal infomation.
Programme Guide
Press to display the programme infomation.
You can also press GUIDE button on the remote control
to select the Programme Guide option.
Software Update(USB)
Use this function, you can update the Newest software
through the USB port by yourself.
Time Menu
Press MENU button and then use
/
button to
select Time menu.
Press
/ OK button the following menu appears
on the screen.
Clock: To set the correct time.
On Time:Set a time for the TV to turn on.
Sleep Timer: Set a time for t
15 Minutes, 30 Minutes, 45 Minutes, 60 Minutes, 90
Minutes, 120 Minutes, 180 Minutes and 240 Minutes.
Time Zone: Press
/
to select your Time Zone: Acre,
M.Grosso, North, Brasilia, Northeast, F.Noronha and
AM(west).
Option Menu
Language: To select the menu language.
Audio Languages: To select the audio language.
Press
/
button to select Primary, Secondary item, and
press
/
button to select the languages you needed.
Note
The Audio Language function is only available in ✲
DTV mode.
Caption
CC2, CC3, CC4,Text1,
Text2, Text3, Text4.
Restore Factory Default: To restore to the factory
default.
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Audio Languages
PVR File system
PVR File system:
This is only available for the LE55A300 model.
Operation
15 TV LED Owner’s Manual
Lock Menu
Parental Control can be used to block specic channels,
ratings and other viewing soure.
Press
MENU button and then use
/
button to
selcet Lock menu.
Press
/OK
button and then press digits button to
input the digits( The initial password is 0000) . The
menu will display as follows:
Tuning Lock
Press
/OK
button to select Tuning Lock and
press
/
operation will be not available. When enter the Tuning
menu, Tuning Lock will be on the screen. If you want to
operate Tuning menu, you need to enter the Lock menu
Set Password
Press OK to enter the submenu , press digits button to
input the number of 0-9 twice in the New Password and
when you input the same number twice.
Block Program
Press
OK
button to enter the submenu, then press
/
button to select a channel you want to blocked,
press the yellow button on the remote control the
channel will blocked, press the yellow button again to
cancel.
Parental Guideance
Press
/OK
button to selcet Parental Guideance. Press
/
children who will watch TV.
Clear Lock
Press
/OK
buttonto selcet Clear Lock , all lock options
wil be cleared.
PC Set
Adjustment for screen Position, Clock, Phase
Display adjust menu by pressing INPUT button then use
/
button to select the source of PC item.
Press
MENU button and then use
/
button to
select the Adjust menu.
Press
/OK
button and then use
/
button to
adjust the options.
Adjust
Auto Adjust
Horizontal Pos.
Vertical Pos.
Clock
Phase
Auto Adjust: This is used to reset the default setting
parameters (After the operation, Auto Adjusting will be
display on the screen).
Horizontal Pos. : Horizontal position of picture can be
adjusted in this item.
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Operation
TV LED Owner’s Manual 16
Vertical Pos.: Vertical position of picture can be
adjusted in this item.
Clock: This is used for adjusting H Position and V
Position as well as relative parameters in PC modes.
Phase : This is used for adjusting the phase of pixel clock
in PC mode.
Quick Menu
This function includes some usual oprations about
PICTURE,SOUND,SAP,SLEEP TIME,Aspect Ratio and
BACKLIGHT.
PICTURE
SOUND
SAP
SLEEP
ASPECT RATIO
BACKLIGHT
Standard
Standard
Mono
Off
Full Screen
100
Q.MENU
Close
USB MODE
Note
The diagrams in the following section are ✲
schematic and only for your reference. Please see
the actual product if necessary.
TO USE THE USB DEVICE
Supported le formats:
Photo: *.jpg,*.bmp, ect;•
Music: *.mp3,*.wma, ect;•
Movie: *.AVI,*.mpg,*.DAT,*.TS,*.MOV,*.mp4,*.VOB;•
TEXT: *.txt•
Note
Due to the particularity of le coding, some les ✲
may be unable to read.
The USB Movie player can surpport codes as ✲
MPEG2, MPEG2_HD,MPEG4,MPEG4_HD,H.264.
when its coding doesn't include in the codes
upwards.
Supported equipment:
Support the equipment that supports Mass
Storage Protocol and whose le system is FAT32,
such as some USB disks and mobile harddisks.
If USB equipment could not be identied due
to unsupported le system, please format the
equipment to the above-mentioned le system.
To achieve smooth playing, ensure the following:
The le code rate should be lower than 300KB/S;•
Due to the limitation of USB signal transmission •
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
Use high-speed USB equipment in conformity •
with USB2.0 full speed Interface Standard; If USB
equipment in conformity with USB1.1 full speed
Interface Standard is used, the playing may be
unsmooth.
When connecting/removing the USB
device
Press INPUT on the remote control unit to select
USB option.
Insert USB equipment into corresponding USB
interface 2s after starting the system.
After entering the system menu, press
/on the
remote control unit to select the require USB les,
press OK button to conrm the selection and enter
the le list relative to the selection.
Press /on the remote control unit to select the
required le, press ENTER button to enter the selected
le.
To exit the streaming media playing system and
watch a TV program, you must press EXIT button to
return to the streaming media main menu at rst (to
protect equipment), and then press INPUT to select
AIR or Cable to return to the TV mode.
Note
Under source of USB, when✱ press button MENU,
screen goes black, except when images or movies
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Operation
17 TV LED Owner’s Manual
are being played.
While playing the USB, press ✱
EXIT button repeatly,
the screen picture will return to USB main
interface, and only at this time you can switch
corresponding signal sources by pressing INPUT
again.
Please do not unplug the USB device when the ✱
connected USB storage device is working. When such
device is suddenly separated or unplugged, the stored
les or the USB storage device may be damaged.
Operating the USB device
Press/to scroll through main menu or submenu
and select your desired option.
Press
OK to conrm your selection.
Press
/ to achieve the FWD (fast forward) and
REV (fast back) of the option being played.
Press
to play, and press it again to pause playing.
Press ZOOM to magnify pictures; when the picture is
enlarged, press / and / to move the picture.
Press EXIT repeatedly to return to the main menu.
Note
✲
les to play together.
Playing a Picture
After entering USB main interface, press / to
select PHOTO item.
Press
ENTER to conrm the selection and enter the
picture le list.
Press / to select the picture you want to play,
press ENTER to conrm, and then press
button to
play the pictures.
If you want to pause the picture which is being
palyed, press the button again.
Press ZOOM to magnify the picture. When the
picture is enlarged, press / and / to move
the picture.
Press
/ to select the last or next picture.
To exit playing, just press
EXIT repeatedly.
Note
The menu display varies with the photo name and ✲
pixel in your equipment.
Playing Music
After entering USB main interface, press / to
select MUSIC item.
Press
ENTER to conrm the selection and enter the
music le list.
Press / and ENTER button to select the music
you want to play, then press
button to play the
music.
Press / to achieve the REV (fast back) and FWD
(fast forward) of the music being played.
Press
/ to select the last or next music.
Press the red button on the remote control to stop
the music being played, when the current interface
is the music being played.
To return to the main menu, just press
EXIT
repeatedly.
Note
You can enjoy the music and the picture at the ✲
same time.
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
and
Operation/Maintenance
TV LED Owner’s Manual 18
Playing a Movie
Atter entering USB main interface, press / to
select Movie item.
Press
ENTER to conrm the selection and enter the
movie le list.
Press / and ENTER button to select the movie
you want to play, and then press
button to play
the movie.
Press
/ to select the last or next movie.
To exit playing, just press
EXIT repeatedly.
Tex t
After entering USB main interface, press / to
select Tex t item.
Press
ENTER to conrm the selection and enter the
text le list.
Press / and ENTER button to select the text you
want to play, and then press
button to play the
text.
Press
/ to select the last or next text.
To exit the Text mode, just press
EXIT repeatedly.
Note
You can enjoy the music and the text at the same ✲
time.
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Using External USB
Disk For Recording
Insert the USB device with FAT32 format into the
USB1 connector. Then, press MENU button.
Note
Only USB1 is available for recording.✟
Press
button to select FUNCTION menu, press
button to enter .
Press
button to select Recorder. Press OK
button to enter the submenu.
Press
button to Select Disk and press or OK
button to enter. Press button to select disk if
your device has several disks.
Press
button to select Format and press to
enter. Press button to select the size you want
to format. Press OK button to format the USB Disk.
19 TV LED Owner’s Manual
&6+*B(1Ꮘ㽓ᅶ᠋LQGG
Waiting for the system checking. And you can see
the speed data after the success checking.
Note
Only have to format when you use the device for O
record for the rst time.
The minimum device size for record is 1GB. Provide O
device formatting function is up to 2TB. The max
Multi-Partition is 16 partitions and one is active at
a time.
Bit rate:O
Device bit-rate>4.5MB/s REC is safe at HD •
stream
Device bit-rate>1.5MB/s REC is safe at SD •
stream
Device bit• -rate<600KB/s REC is bad for REC
The system can not work normally if the USB O
device have the listing problem below:
The device has bug.•
The device has error block.•
The device reports the unfaithful size.•
IMPORTANT
USB device should be format as FAT32 format by •
your PC before insert to the USB connector.
RECORDING
Press D.MENU button to record the program being
played, and press D.MENU or EXIT button to make
the recording interface minimum.
Press STOP button to stop the program recording
being played.
For Playback the recorded program. Press
INDEX
button to open the recorded list.
Maintenance
Maintenance
Early malfunctions can be prevented. Careful and regular
cleaning can extend the amount of time you will have
the power cord before you begin any cleaning.
Cleaning the Screen
for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it’s almost dry, and
then use it to wipe the screen.
then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time
(such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
