Trendnet TC-K25C6 Quick Installation Guide

Trendnet
Brand
Trendnet
Model
TC-K25C6
Category
Networking cables
Type
Quick Installation Guide

This manual is also suitable for

TC-K25C6/TC-K50C6
Cat6 Keystone Jack
Quick Installation Guide
T568B Pinout
1. White Orange
2. Orange
3. White Green
6. Blue
4. White Blue
5. Green
7. White Brown
8. Brown
5. Feed the included cable tie through the
cable fixture hole and tighten to secure
the termination cap and keystone jack
together.
1. Strip approximately 30mm (1.2 in.) of
jacket from the twisted pair cable.
Unloading the cable
1. Cut the cable tie.
2. Using a flathead screwdriver, gently
pry each side of the termination cap
until released.
4. Press the termination cap down until
flush with the keystone jack. Ensure each
wire is firmly anchored in each slot.
3. Clip the termination cap onto the
keystone jack hinge.
2. Insert the cable into the termination cap
and fan out all four twisted pairs. Using the
T568A or T568B color labeling, position
each wire appropriately into the color
labeled slots. Cut excess wires.
Cable Fixture Hole
Cable Tie
Cable Tie
Cut off cable tie
  • Page 1 1

Trendnet TC-K25C6 Quick Installation Guide

Trendnet
Brand
Trendnet
Model
TC-K25C6
Category
Networking cables
Type
Quick Installation Guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents