Midmark Preva Intraoral X-ray System User guide

Preva Dental X-Ray System

User Manual

00-02-1576 Rev. B

Progeny Dental

1407 Barclay Boulevard

Buffalo Grove, Illinois 60089 U.S.A.

Phone: (888) 924-3800 Fax: (847) 459-5175

WWW.progenydental.com

Table of Contents Preva

i

Table of Contents

General Information.........................................................................................................1

Product Description...................................................................................................................1

Compliance with Applicable Standards.....................................................................................3

Certified Components ...............................................................................................................3

EC Declaration of Conformity....................................................................................................4

Authorized Representatives......................................................................................................5

Safety........................................................................................................................................5

Explanation of Symbols on Technical Labels............................................................................6

Obtaining Technical Support.....................................................................................................6

Operating the Preva Dental X-Ray System.....................................................................7

Using the Operator Panel .........................................................................................................7

Taking an X-Ray .......................................................................................................................9

Using the 12 in Cone (30-A2033)..............................................................................................9

Recommended Maintenance ........................................................................................10

Regular Maintenance..............................................................................................................10

Cleaning and Disinfecting.......................................................................................................10

Checking System Functions..........................................................................................11

System Function Checklist......................................................................................................12

Solving Performance Issues..........................................................................................13

Performance Issues................................................................................................................13

Obtaining Technical Support...................................................................................................13

Pre-programmed Exposure Times................................................................................14

System Configuration....................................................................................................16

System Configuration Mode....................................................................................................16

Adjusting the Display ..............................................................................................................17

Changing Pre-programmed Exposure Settings ......................................................................18

Showing Current System Configuration..................................................................................21

Changing the Cone Size.........................................................................................................22

Diagnostic Mode .....................................................................................................................23

Specifications................................................................................................................24

Preva Dental X-Ray System ...................................................................................................24

General Information Preva

1

General Information

Product Description

The Preva Dental X-Ray System is a state-of-the-art, high-frequency intra-oral x-ray

machine. The Preva consists of five components, as shown in Figure 1: the Control

Unit, the Tubehead, the Articulating Arm, the Horizontal Arm, the Cone, and the

Remote Control option.

Control Unit

The Control Unit provides for the input power connection and control of the Tubehead

and Operator Panel. It provides automatic line voltage compensation, kVp control and

exposure time control. The Control Unit consists of the mounting base and Operator

Panel.

Tubehead

The Tubehead contains the x-ray tube, high voltage circuit, and Cone. The Tubehead

is shipped already assembled to the Articulating Arm.

Note: There is a small hole in the plastic handle covering the back of the

Tubehead. Under no circumstances should this hole be blocked as it provides an

air vent to allow the Tubehead oil to expand and contract as the unit is operated.

Articulating

Arm

The Articulating Arm provides the articulation support for the Tubehead and the reach

and coverage of the Tubehead to the patient. The Articulating Arm allows smooth

movement for precise positioning and does not drift or vibrate when left in position.

Horizontal

Arm

The Horizontal Arm helps provide the necessary reach for the Preva. The Horizontal

Arm pivots smoothly around a shaft inserted in the top of the Control Unit. The

Horizontal Arm contains an access cover to connect the cable from the Horizontal

Arm to the Control Unit. The Horizontal Arm is available in three lengths, providing

reaches of 56, 66 and 76 inches.

Cone

The Cone establishes the distance from the x-ray tube to the patient’s skin. It

provides positioning assistance and collimates the x-ray beam to within a defined

circle at its end. The Preva is shipped with the standard 8 inch Cone attached to the

Tubehead. A 12 inch Cone (30-A2033) can be ordered as an option.

Remote

Control

An optional component, the remote control switch is used to make exposures in

addition to or replacing the use of the exposure button.

Installation

and Service

The Preva Dental X-Ray System should only be installed and serviced by approved

Progeny dealer personnel. Contact Progeny at (888) 924-3800 if you need assistance

locating an approved dealer.

General Information Preva

2

Figure 1

Component

Diagram

General Information Preva

3

Compliance with Applicable Standards

Radiation

Protection

The certified components of the Preva Dental X-Ray System comply with

Radiation Performance Standards 21 CFR, Subchapter J, at the time of

manufacture.

The certified components of the Preva Dental X-Ray System comply with IEC

60601-1-3 Radiation protection/x-ray equipment.

UL 2601-1 File

Number:

E181750

Classified by Underwriters Laboratories Inc. with respect to electrical shock, fire

and mechanical hazards only in accordance with UL 2601-1, and CAN/CSA

C22.2 NO, 601.1-M90, and to the following particular standards, IEC60601-2-7,

IEC60601-2-28.

EMI/EMC

IEC60601-1-2

Certified Components

Component

Tubehead

Control Unit

Cone 8 in.

Cone 12 in.

Cone 8 in. Rectangular

Reference Number

30-A1027

30-A0010

30-A2016

30-A2033

30-A2041

General Information Preva

4

EC Declaration of Conformity

Name and

Description of

Product

Progeny Preva

Catalog

Model

P7017, 76 inch reach

30-A0010, Control

30-A2071, Extension Arm, Long

Catalog

Model

P7016, 66 inch reach

30-A0010, Control

30-A2073, Extension Arm, Short

Catalog

Model

P7015, 56 inch reach

30-A0010, Control

30-A2074, Extension Arm, Compact

Class: IIb

Reference

Numbers to

which

Conformity is

Declared

The following regulatory documents apply:

UL 2601-1

IEC 60601-1-2

IEC 60601-1-3

IEC 60601-2-7

IEC 60601-2-28

IEC 60601-2-32

Medical Device directive

ISO 13485

EN46001

Declaration

Progeny, Inc. declares that the products described herein meet all the applicable

Essential Requirements of the EC Medical Device Directive 93/42/EEC in Annex

I. For Class IIb products described herein, the product is manufactured,

inspected, tested and released in accordance with the approved quality

assurance system established in accordance with ISO 13485 and Annex II of the

EC Medical Device Directive under the Supervision of the SGS United Kingdom

Ltd., a Notified Body.

Contact

Alan Krema

Product Development

Progeny, Inc.

General Information Preva

5

Safety

Radiation Safety

Only qualified and authorized personnel may operate this equipment observing

all laws and regulations concerning radiation protection.

• The operator at all times must remain 6ft. (2m) from the focal spot and the X-

ray beam for operator protection.

• Full use must be made of all radiation safety features on the equipment.

• Full use must be made of all radiation protection devices, accessories and

procedures available to protect the patient and operator from x-ray radiation.

Electrical Safety

• Only qualified and authorized service personnel should remove covers on

the equipment.

• This equipment must only be used in rooms or areas that comply with all

applicable laws and recommendations concerning electrical safety in rooms

used for medical purposes, e.g., IEC, US National Electrical code, or VDE

standards concerning provisions of an additional protective earth (ground)

terminal for power supply connection.

• Before cleaning or disinfecting, this equipment must always be disconnected

from the main electrical supply.

• The Preva Dental X-Ray System is ordinary type medical equipment without

protection against ingress of liquids. To protect against short-circuit and

corrosion, no water or any other liquid should be allowed to leak inside the

equipment.

Explosion

Safety

This equipment must not be used in the presence of flammable or potentially

explosive gases or vapors, which could ignite, causing personal injury and/or

damage to the equipment. If such disinfectants are used, the vapor must be

allowed to disperse before using the equipment.

Authorized Representatives

North America

PROGENY DENTAL

1407 Barclay Blvd.

Buffalo Grove, IL 60089

Phone: 888-924-3800

Fax: 847-459-5175

techsupport@progenydental.com

Europe

CE Partner 4U

Esdoornlaah 13

3951DB Maarn

The Netherlands

Phone: +31.343.442.524

Fax: +31.343.442.162

General Information Preva

6

Explanation of Symbols on Technical Labels

Type B: Protection against electric shock (IEC 60601.1-1988)

Consult written instructions in User’s Manual.

ATTENTION RAYONS-X:

OPERATION SEULEMENT PAR DU PERSONNEL AUTORISE. VOIR MANUEL

DE L’OPERATEUR.

WARNING X-RAY

THIS X-RAY UNIT MAY BE DANGEROUS TO PATIENT AND OPERATOR

UNLESS SAFE EXPOSURE FACTORS AND OPERATING INSTRUCTIONS

ARE OBSERVED.

X-RAY EMISSION

Mains HOT WIRE

Mains NEUTRAL WIRE

Earth Ground

Obtaining Technical Support

Contact

PROGENY DENTAL

1407 Barclay Blvd.

Buffalo Grove, IL 60089

Phone: 888-924-3800

Fax: 847-459-5175

techsupport@progenydental.com

Operating Instructions Preva

7

Operating the Preva Dental X-Ray System

Using the Operator Panel

Power On

Settings

When the Preva Dental X-Ray System is powered on, the Operator Panel

selections are those that were in use when the system was last powered off.

Figure 2

Preva Operator

Panel

Operating Instructions Preva

8

Exposure

Settings

When the system is powered on, the Operator Panel, Figure 2, displays the

exposure settings (kV, mA, and seconds) for the currently selected tooth, image

receptor type, and patient size. Use the Tooth Selection, Image Receptor Type,

and Patient Size buttons to select other exposure settings.

• For a table of the factory-programmed exposure settings, refer to the

Pre-programmed Exposure Settings tables later in this manual.

Adjusting

Exposure

Settings

Preset exposure settings can be adjusted prior to making an exposure. Use the

right arrow to select the exposure setting to adjust. Then use the up and down

arrow buttons to adjust the value.

• To save new presets, use System Configuration mode described later in

this manual.

Exposure

Button and

Ready Indicator

The Exposure button is used to initiate an x-ray exposure. For a complete

exposure, the button must be pressed and held until the Radiation Indicator no

longer illuminates and the audible signal is no longer heard. Releasing the

Exposure button immediately terminates the x-ray exposure.

CAUTION!

Releasing the Exposure button prior to the completion of

the x-ray exposure will result in an incomplete exposure

of the image. This may require the operator to re-take the

radiograph. When a premature release of the Exposure

button occurs, the system will notify the operator

momentarily, then return to operating mode.

Ready Indicator

The Ready Indicator illuminates when the system is ready to make an exposure.

Immediately after an exposure, the Ready Indicator flashes until the x-ray tube

cools down sufficiently to make the next exposure. When the Ready Indicator is

flashing, no exposure can be made.

Radiation

Indicators

The Preva has a visible and an audible Radiation Indicator. When an exposure is

in progress, the Radiation Indicator on the Operator Panel is illuminated and an

audible tone is heard. The exposure is complete when the Radiation Indicator is

extinguished and the audible tone is no longer heard.

Operating Instructions Preva

9

Taking an X-Ray

1. Turn the power switch, located at the upper right of the Control Unit, to the

“On” position. The Ready Indicator on the front of the Operator Panel, Figure

2, will light.

2. Verify that the unit is set for the correct Image Receptor Type. The icon for

the currently selected Image Receptor Type is illuminated. To change the

Image Receptor type, press the Image Receptor Type button until the correct

Image Receptor Type is selected.

3. Verify that the system is set for the appropriate Patient Size. The icon for the

currently selected Patient Size is illuminated. The change the Patient Size,

press the Patient Size button until the correct Patient Size is selected.

4. Verify that the unit is set for the Tooth to be imaged. The icon for the

currently selected Tooth is illuminated. To change the Tooth Selection, press

the Tooth Selection button until the correct Tooth is selected.

5. If desired, preset exposure settings for the combination of Image Receptor

Type, Tooth Selection, and Patient size, selected in steps 2-4, can be

adjusted prior to making an exposure. Use the right arrow to select the

exposure setting to adjust. Then use the up and down arrow buttons to

adjust the value. Skip this step if you are using pre-programmed exposure

settings.

Note: When exposure settings are being adjusted, the Tooth Selection,

Image Receptor Type, and Patient Size buttons are turned off.

6. Position the Tubehead to the patient using standard accepted positioning

procedures.

7. Press and hold the Exposure button until the audible signal is no longer

heard and the Radiation Indicator is no longer illuminated. Releasing the

Exposure button or coil-cord hand switch at any time will immediately

terminate the exposure.

Note: When using the coil-cord hand switch, it is recommended that the

operator exit the operatory if possible.

Note: In order to comply with regulations and good safety practices, the

technique factors must be visible to the operator from the remote location.

8. Return the Tubehead to the storage position.

Note: Be careful not to strike the Tubehead on the wall when returning it to

the storage position.

Using the 12 in Cone (30-A2033)

The Preva Dental X-Ray System is factory set for use with the standard supplied

8 inch (20 cm) Cone. The 12 inch (30 cm) Cone (30-A2033) is available. Using

the longer cone requires longer exposure times. See the System Configuration

section of this manual for instructions to set the system to use the longer cone.

Recommended Maintenance Preva

10

Recommended Maintenance

Regular Maintenance

In the interest of equipment safety, a regular maintenance program must be

established. This maintenance program should consist of cleaning and

disinfecting as well as annual system function checking. It is the owner’s

responsibility to arrange for this service and to assure that the personnel

performing this are fully qualified to service Progeny Dental x-ray equipment.

Cleaning and Disinfecting

The Preva Dental X-Ray System requires disinfection. The cleaning and

disinfecting methods described here protect operators and patients in a manner

that is safe for the equipment.

Cleaning

Compounds

Progeny Dental recommends the use of parachlorometaxylenol-based

disinfectant products, such as Envirosystems “EcoTru Professional”, or the

equivalent.

Cleaning

Methods

Between each patient, perform the following cleaning and disinfecting steps.

1. Remove gross bio-burden from the cone, handles and structure with a

disposable towel moistened with water.

2. Dry the cone, handles and structure with disposable towels.

3. Wipe the cone, handles and structure with the parachlorometaxylenol-based

disinfectant product following the disinfectant manufacturer’s instructions.

4. Clean any remaining parachlorometaxylenol from the component with water.

This additional step prevents possible product discoloration or corrosion.

5. Dry the cone, handles and structure with disposable towels.

Caution!

The Preva Dental X-Ray System is not waterproof. Use

only moistened, not saturated towels.

Checking System Functions Preva

11

Checking System Functions

The following checks must be performed to complete the installation of the Preva Dental X-Ray System

and as part of the recommended maintenance as indicated in the User Manual. Failure to perform these

checks may result in an installation that does not comply with U.S. Radiation Performance Standards 21

CFR Subchapter J.

CAUTION!

If the Preva Dental X-Ray System does not perform the functions below,

advise the owner that the system is not to be used. See the Troubleshooting

section of this manual or contact Progeny’s Technical Support.

Checking System Functions Preva

12

System Function Checklist

9

Wall Mounting

Ensure that the wall support is adequate and that the system is properly

mounted to the wall.

Labels

Ensure that all certified components bear labels that include the model and

serial number, date of manufacture and a statement of certification as noted

elsewhere in this manual.

Tubehead

Check for oil leaks or other evidence that could indicate internal damage.

Replace the Tubehead, if necessary.

Tubehead

Rotation

Ensure that the Tubehead maintains its position around the horizontal axis

while remaining easy to rotate and position. Also check the vertical pivot of

the Tubehead for easy movement while remaining in position after moving.

Suspension

Check that all movements are smooth and quiet. Verify that the Tubehead is

properly counterbalanced for vertical drift and that the Horizontal and

Articulating Arms do not drift horizontally.

Power Switch

Verify that the switch is working properly and that the Ready Indicator is

illuminated when the power switch is in the ON position.

Operator Panel

Controls

With the power switch, located at the upper right of the Control Unit, in the

ON position, verify that technique factors appear on the Operator Panel.

Also, check the function of the selection buttons for Tooth Selection, Image

Receptor Type and Patient Size. Pressing a selection button should cause

indicator lamps to indicate the selected item.

Exposure

Button

Verify that the Exposure button on the Operator Panel is functioning properly.

To make an exposure, press and hold the Exposure button until the

Radiation Indicator is extinguished and the audible signal is no longer heard.

Exposure

Indicators

Make several exposures and verify that the Radiation Indicator illuminates

and the audible signal is heard.

Premature

Termination

Select the longest exposure time possible using the up and down arrows.

Initiate an exposure but release the Exposure button after a brief period of

time before the timer terminates the exposure. Verify that the display

indicates “Pretermination Error” and returns to normal operating mode.

Coil-cord Hand

Switch Option

If a coil-cord hand switch is used, inspect the switch housing and coil cord for

damage or wear. Replace if evidence of damage is present.

User Information

Make certain that the user of the system has received the User Manual.

Solving Performance Issues Preva

13

Solving Performance Issues

Performance Issues

Light or Dark X-

Ray Images

1. Adjust the selected exposure time, kilovoltage or tube current to produce an

acceptable image. If necessary, reprogram the techniques factors, as

explained in the System Configuration section of this manual.

2. Verify the kilovoltage and tube current during an exposure using the

diagnostic mode, as explained in the System Configuration section of this

manual. Alternatively, you may employ a non-invasive meter to evaluate

kilovoltage and exposure time.

3. Inspect the condition of the remaining imaging chain components such as

the film, chemistry and processor, or the condition of the x-ray sensor and

computer.

No X-Ray

If no x-ray is produced, check the following:

1. Verify that the line cord (if one is in use) is properly connected.

2. Verify that the power switch is in the ON position.

Obtaining Technical Support

Contact

PROGENY DENTAL

1407 Barclay Blvd.

Buffalo Grove, IL 60089

Phone: 888-924-3800

Fax: 847-459-5175

techsupport@progenydental.com

Factory Default Exposure Settings Preva

14

Pre-programmed Exposure Times

The tables below show the factory default exposure settings for each combination of Tooth, Image

Receptor Type, and Patient Size on the Operator Panel. These exposure settings can be modified using

the System Configuration mode. See the System Configuration section for details.

8 inch (20 cm) Cone

Digital Receptor D-speed Film E/F Speed Film

Tooth Selection Setting Adult

Child

Adult

Child

Adult

Child

kV

60 60 60 60 60 60

mA

7 7 7 7 7 7

Incisor

seconds

0.05 0.032 0.2 0.125 0.08 0.05

kV

60 60 60 60 60 60

mA

7 7 7 7 7 7

Bicuspid

seconds

0.064 0.04 0.25 0.16 0.1 0.064

kV

60 60 60 60 60 60

mA

7 7 7 7 7 7

Bitewing

seconds

0.125 0.064 0.4 0.25 0.16 0.1

kV

60 60 60 60 60 60

mA

7 7 7 7 7 7

Lower

Molar

seconds

0.064 0.04 0.25 0.16 0.1 0.064

kV

60 60 60 60 60 60

mA

7 7 7 7 7 7

Upper

Molar

seconds

0.08 0.05 0.32 0.2 0.125 0.08

Factory Default Exposure Settings Preva

15

12 inch (30 cm) Cone

Digital Receptor D-speed Film E/F Speed Film

Tooth Selection Setting Adult

Child

Adult

Child

Adult

Child

kV

60 60 60 60 60 60

mA

7 7 7 7 7 7

Incisor

seconds

0.125 0.08 0.4 0.25 0.16 0.1

kV

60 60 60 60 60 60

mA

7 7 7 7 7 7

Bicuspid

seconds

0.16 0.1 0.5 0.32 0.2 0.125

kV

60 60 60 60 60 60

mA

7 7 7 7 7 7

Bitewing

seconds

0.32 0.16 0.8 0.5 0.32 0.2

kV

60 60 60 60 60 60

mA

7 7 7 7 7 7

Lower

Molar

seconds

0.16 0.1 0.5 0.32 0.2 0.125

kV

60 60 60 60 60 60

mA

7 7 7 7 7 7

Upper

Molar

seconds

0.2 0.125 0.64 0.4 0.125 0.16

System Configuration Preva

16

System Configuration

System Configuration Mode

About System

Configuration

Mode

The Preva Dental X-Ray System has a software-driven system configuration

mode. When the Preva is in system configuration mode, you can perform the

following procedures:

• Adjusting the Display

• Changing Pre-programmed Exposure Settings

• Changing the Cone Size

• Showing Current System Configuration

• Displaying Diagnostic Data

Using System

Configuration

Mode

1. To enter system configuration mode, depress the Tooth Selection and

Patient Size Selection buttons on the Operator Panel simultaneously for 5

seconds. The display shows the Main System Configuration menu, as shown

in Figure 3, and the Ready Indicator blinks.

2. To select menu items while in system configuration mode, use the up and

down arrows to highlight a menu option. Then use the right arrow button as

an “Enter” button to select the highlighted option. When changing presets,

the right arrow button is also used to select the technique factor.

3. After selecting a menu option, use the up and down arrows to increase or

decrease values.

Figure 3

Main System

Configuration Menu

System Configuration Preva

17

Adjusting the Display

The Preva Dental X-Ray System allows the operator to adjust the display image.

1. From the system configuration main menu, shown in Figure 3, select

ADJUST DISPLAY. You will see the Display Options menu shown in Figure

4.

2. Selecting EXIT returns the display to the Main System Configuration menu

shown in Figure 3.

Adjusting

Contrast

1. Select ADJUST CONTRAST from the menu. You will see the Progeny logo.

2. Use the up and down arrows to increase or decrease the contrast between

the menu text and the display background.

3. Press the right arrow to save your settings.

Reversing the

Image

1. Select REVERSE IMAGE from the menu. The text and display background

colors will be swapped.

2. Press the right arrow to save your settings.

Figure 4

Display Options

Menu

Page is loading ...

Midmark Preva Intraoral X-ray System User guide

This manual is also suitable for

Midmark Preva Intraoral X-ray System User guide

Related papers

Other documents