Rugged Ridge Rim Protector in Satin Black Powder Coat, 15250.01 Installation guide

  • I've reviewed the installation instructions for the Rugged Ridge Rim Protector Ring, models 15250.01 and 15250.02. This document details how to properly install the ring on compatible 17" wheels using the provided M6 screws and specifies the torque requirements. I'm ready to answer your questions about this product.
  • What type of wheels are compatible with this protector ring?
    What is the first installation step?
    What is the tightening torque for mounting screws?
15250.01 - Polished SS
15250.02 - Satin Black
Rim Protector Ring
Contents:
1. Rim Protector Ring (1)
2. M6 Flanged Hex Head Screws (14)
1. Remove Button Head screws from wheel.
Page 1 of 1
2. Place Rim Protector Ring onto front face of wheel. Ensure that Valve Stem Recess aligns with
Valve Stem. Install M6 Flanged Hex Head Screws by hand. Once all M6 Screws are in place,
tighten to 6 ft-lbs. Retorque after 25 miles and check frequently thereafter.
© Copyright 2009, Omix-Ada
Omix-Ada Inc.
460 Horizon Dr. Suite 400
Suwanee, Georgia 30024
Valve Stem Recess
Note: Only to be used with Rugged Ridge 17" wheels, P/N's 15301.01, 15301.10, and 15301.40
/