2. Rugged Ridge
  3. 15250.01

Rugged Ridge 15250.01, Rim Protector in Satin Black Powder Coat Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Rugged Ridge 15250.01 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
15250.01 - Polished SS
15250.02 - Satin Black
Rim Protector Ring
Contents:
1. Rim Protector Ring (1)
2. M6 Flanged Hex Head Screws (14)
1. Remove Button Head screws from wheel.
Page 1 of 1
2. Place Rim Protector Ring onto front face of wheel. Ensure that Valve Stem Recess aligns with
Valve Stem. Install M6 Flanged Hex Head Screws by hand. Once all M6 Screws are in place,
tighten to 6 ft-lbs. Retorque after 25 miles and check frequently thereafter.
© Copyright 2009, Omix-Ada
Omix-Ada Inc.
460 Horizon Dr. Suite 400
Suwanee, Georgia 30024
Valve Stem Recess
Note: Only to be used with Rugged Ridge 17" wheels, P/N's 15301.01, 15301.10, and 15301.40
/