2. Diode Dynamics
  3. DD6192

Diode Dynamics DD6192, DD6193, DD6195, DD6196, DD6197, DD6199, DD6688, DD6689, SS3 LED Fog Light Kit Installation guide

  • Hello! I've reviewed the user manual for the Diode Dynamics SS3 Type M Foglight Bracket Kit. This document provides installation instructions for using your new LED pods with your vehicle's existing fog light mounts. It includes details on how to attach the brackets, connect the wiring, and adjust the aim. I'm here to assist with any questions you have about the process or the product in general.
  • What vehicles is this kit compatible with?
    Do I need new hardware to install the new pod?
    What do I do if the light does not turn on?
    How should I aim the fog lights?
(314) 205-3033 WWW.DIODEDYNAMICS.COM
PAGE 1
Type M Foglight Bracket Kit
Thank you for your purchase of our new SS3 Type M Foglight Bracket Kit. CAD-designed to use
existing mounting points, this kit is compatible with many Mopar applications, including the
Jeep JK Wrangler and Jeep JL Sahara. Basic installation instructions are included below.
Please contact us if you have any questions.
SS3 3” LED Pod
TOP
BOTTOM
See back for further instructions.
1. Attach the bracket to the pod. See the diagrams
above and to the right. Make sure the bracket is in
the correct orientation.
2. Access your factory fog lights.
Left and Right Sides
(314) 205-3033 WWW.DIODEDYNAMICS.COM
PAGE 2
PP0106
Please contact Diode Dynamics should you have any questions about the installation
or wiring process, at 314-205-3033 (9a-5p CST) or [email protected].
3. Disconnect the fog light connector from the vehicle wiring harness.
4. Remove the factory fog light housing. The factory hardware will be reused.
5. Install your new SS3 pod using the factory hardware. The tabs and holes on the bracket
should align with the mounting points of the factory fog light housing. Re-use the factory
hardware, tightening securely.
6. Use the included wire adapters to connect the pod to the vehicle wiring harness.
7. Test function. If the light does not turn on, try ipping the connector 180°.
8. Adjust and aim the fog light according to your local and state laws using the screws on the
side of the bracket. In general, fog lamps should be angled slightly downwards to illuminate
the area directly in front of your vehicle.
GUARANTEE
100% SATISFACTION
Scan the QR code to link to our YouTube Channel!
NEED MORE HELP?
We continuously bring in vehicles to our testing garage in order to
create step-by-step videos to walk you through the installation process
on your specic vehicle. Scan the QR code to see all our installation
videos. Be sure to subscribe to our channel to stay up-to-date on the
newest products and videos from Diode Dynamics!
WARRANTY
3 YEAR
This installation guide is for the following SKUs:
DD6192 Worklight SS3 Sport Type M Kit White Driving
DD6193 Worklight SS3 Sport Type M Kit White Fog
DD6194 Worklight SS3 Sport Type M Kit Yellow Driving
DD6195 Worklight SS3 Sport Type M Kit Yellow Fog
DD6196 Worklight SS3 Pro Type M Kit White Driving
DD6197 Worklight SS3 Pro Type M Kit White Fog
DD6198 Worklight SS3 Pro Type M Kit Yellow Driving
DD6199 Worklight SS3 Pro Type M Kit Yellow Fog
8
year
warranty
/