Shenzhen IL-KY-0502C1 User manual

Shenzhen
Brand
Shenzhen
Model
IL-KY-0502C1
Type
User manual

Shenzhen IL-KY-0502C1 is a wireless remote control for RGBW string lights, with a range of up to 15 meters.

Shenzhen IL-KY-0502C1 is a wireless remote control for RGBW string lights, with a range of up to 15 meters.

Page
1
iLamp
Shenzhen ilamp Technology Co.,Ltd
String lights
Test Model ：IL-DM-KY-0502C1
Page
2
SPECIFICATION
MODEL
IL-DM-KY-0502C1 Remote controller
INPUT
VOLTAGE RANGE
DC 3V by Battery
ENVIRONMENT
WORKING TEMP.
STORAGE TEMP, HUMIDITY
SAFETY &EMC
WITHSTAND VOLTAGE
Pass
ISOLATION RESISTANCE
Pass
EMC EMISSION
Pass
EMC IMMUNITY
Pass
wireless remote control
Distance
15 meter at empty space
MAX RF Output Power
Application
Suitable for outdoor RGBW String lights.
■ Handle panel
Key Function:
ON: the main function is turn on the string lights.
OFF: the main funcion is turn off the string lights.
: Static colors increase brightness.
☼: Static colors decrease brightness.
+: Color change speed up.
-: Color change speed down.
R: Static Red G: Static Green B: Static Blue W: Static Warm white
Y: Static Yellow C: Static Cyan O: Static Orange P: Static Purple
Mutile: All bulbs on with different static colors.
Random: All bulbs on with random changing colors.
Strobe: Part of bulbs random blink, background of rest bulbs keep static color,press the button to switch 8 color modes.
Twinkle: Part of bulbs random blink, rest bulbs off,press the button to switch 8 color modes.
Fade: All bulbs on with different colors brightness down in slowly automatically.
Breath: All bulbs on and shine from strong to weak,press the button to switch 8 color modes and a automatically changing colors
Page
3
mode.
Flash: All bulbs on and flash,press the button to switch 8 color modes and a automatically changing colors mode.
Auto: All bulbs on and switch 8 colors modes automatically.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Page
4
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void
your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable e
xposure condition without restriction.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Shenzhen IL-KY-0502C1 User manual

Shenzhen
Brand
Shenzhen
Model
IL-KY-0502C1
Type
User manual

Shenzhen IL-KY-0502C1 is a wireless remote control for RGBW string lights, with a range of up to 15 meters.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents