Specifications subject to change without notice. ConenMounts is a trading brand of Conen Produkte GmbH & Co. KG. All other product and brand names are trademarks and/or registered trademarks
of their respective companies. Conen disclaims any and all rights in these marks. Copyright 2015 ConenMounts overboard display mount 12/15.
Distributed by:
Stirling Communications Supply
29 Poplar Drive T: (908) 604-9360
Stirling, NJ 07980 E: [email protected]
eMail: [email protected]
www.conenmounts.com
OVERBOARD DISPLAY MOUNT
OVERBOARD DISPLAY MOUNT
INSTALLATION GUIDE
Part No. OTB
max. 35.9˝ apart
Installation sheet | Page 2 of 2
TECHNICAL SPECIFICATION AND MOUNTING POSITIONS
OVERBOARD DISPLAY MOUNT
3
3
44
5
5
1.1
1.1
2.1
2.1
Distance between posts (hole-hole):
min. 7.9 – max. 32,7
12,412,4
1.2
2.2
2.2
Minimum 7´ – Maximum 8´
Upper mounting position 74.4˝ from floor
Lowest mounting position 42.9˝
Hardware included
1.1
4 x Allen head lens
screw with flange 8 x 12
1.2
2 x Allen head lens screw
with flange 8 x 12
1Secure parts of
vertical post
2.1
8 x Allen head counter-
sunk screw M6 x 20
8 x selflocking nut M6
8 x washer 6 mm
2.2
8 x Allen head counter-
sunk screw M6 x 20
8 x selflocking nut M6
8 x washer 6 mm
2Attach wall mount
brackets
4 x Allen head lens screw
with flange M8 x 65
4 x selflocking nut M8
4 x washer 8 mm
3Attach mount to
posts
4 x Allen head lens screw
with flange M8 x 16 (for
screen mounting)
4Attach display to
brackets
Leveling screw
5Level the display
1.2
/
