Kensington SD4810P User manual

I have reviewed the user manual for the Kensington SD4810P dock. This document provides instructions on setting up the dock, connecting it to power, a laptop, and external monitors. It also details the various ports and video output capabilities, including support for a triple monitor setup. I'm ready to answer your questions about this device.
What video ports are available on the dock?

How many USB-A ports does the dock have?

What is the maximum power delivery supported by the USB-C host port?

Kensington SD4810P USB-C Triple Video Driverless Dock.

1. Connect the power adapter.

Connect the included AC adapter to the back of the dock.

Connect the power cable to the adapter.

Plug the power cable into a wall outlet.

2. The back of the dock (from left to right).

One DP++ 1.2 port.

One HDMI 1.4 port.

One VGA port.

One Gigabit Ethernet port (10/100/1000Mbps).

Two USB-A 3.2 Gen1 ports (up to 5V/0.9A/5Gbps) for connecting accessories such as keyboards, mice, and USB drives.

One headphone jack.

One USB-C 3.2 Gen1 port (up to 5V/0.9A/5Gbps) for connecting a USB-C power adapter.

*Minimum of 75W PD required from your USB-C power adapter.

USB-C power adapter not included.

One DC 20V port for use with included power adapter.

The front of the dock (from left to right).

One USB-A 3.2 Gen1 port (up to 5V/0.9A/5Gbps) for connecting accessories such as keyboards, mice, and USB drives.

Two USB-A 3.2 Gen1 ports (up to 5V/1.5A/5Gbps) for charging accessories such as smartphones.

One audio combo jack.

One USB-C 3.2 Gen1 host port (supporting up to 85W PD).

3. Connect one end of the USB-C cable to a USB-C port on the laptop.

4. Connect the other end of the included USB-C cable to the USB-C 3.2 Gen1 host port on the front of the dock.

5. Video speciﬁcations.

One monitor.

HBR2/HBR3: DP++ and HDMI provides Single 4K (3840x2160) @ 30Hz. VGA provides Single 1080p (1920x1080) @ 60Hz.

Two monitors.

HBR2/HBR3: DP++ and VGA or DP++ and HDMI or VGA and HDMI provides Dual 1080p (1920x1080) @ 60Hz.

Three monitors.

HBR2/HBR3: DP++ and VGA and HDMI provides Single 1080p (1920x1080) @ 60Hz and Dual 720p (1280x720) @60Hz.

5a. If you would like 3 displays, you can use the DP++ and HDMI ports for a triple monitor setup using your laptop as the ﬁrst screen.

5b. If you choose to connect three external monitors via the DP++, HDMI, and VGA ports, then your laptop screen will not be available.

For support, visit kensington.com/support.