Aruba 6200M Reference guide

AOS-CX 10.13 Command-Line

Interface Guide

6200 Switch Series

Published: November 2023

Edition: 1

|2

Copyright Information

This product includes code licensed under certain open source licenses which require source

compliance. The corresponding source for these components is available upon request. This offer is

valid to anyone in receipt of this information and shall expire three years following the date of the final

distribution of this product version by Hewlett Packard Enterprise Company. To obtain such source

code, please check if the code is available in the HPE Software Center at

https://myenterpriselicense.hpe.com/cwp-ui/software but, if not, send a written request for specific

software version and product for which you want the open source code. Along with the request, please

send a check or money order in the amount of US $10.00 to:

Hewlett Packard Enterprise Company

Attn: General Counsel

WW Corporate Headquarters

1701 E Mossy Oaks Rd Spring, TX 77389

United States of America.

Notices

The information contained herein is subject to change without notice. The only warranties for Hewlett

Packard Enterprise products and services are set forth in the express warranty statements

accompanying such products and services. Nothing herein should be construed as constituting an

additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or

omissions contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession,

use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer

Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government

under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard

Enterprise has no control over and is not responsible for information outside the Hewlett Packard

Enterprise website.

For more information, see the KM Process Guide. ?>

Acknowledgments

Bluetooth is a trademark owned by its proprietor and used by Hewlett Packard Enterprise under

license.

Contents

Contents 3

About this document 42

Applicable products 42

What's new in this release 42

Latest version available online 44

Command syntax notation conventions 44

About the examples 45

Identifying switch ports and interfaces 46

Introduction to the AOS-CX CLI 47

CLI access 47

Getting CLI help 47

Authority levels 48

Command contexts 49

Operator context (>) 49

Navigating to the operator context (>) 49

Auditor context 49

Manager context (#) 50

Navigating to the manager context (#) 50

Global configuration context (config) 50

Navigating to the config context 51

Other configuration command contexts 51

Support for range contexts 52

Rules for range contexts 54

Command history 54

Command completion 55

Pipe (|) support in show commands 55

Command syntax notation conventions 56

Service OS CLI commands 57

boot 57

cat 58

cd path 58

config-clear 59

cp 60

du 61

erase zeroize 62

exit 63

format 64

identify 65

ip 66

ls 67

md5sum 68

mkdir 69

mount 70

mv 71

password (svos) 72

AOS-CX 10.13 Command-Line Interface Guide | (6200 Switch Series) 3

Contents |4

ping 72

pwd 73

reboot 74

rm 75

rmdir 75

secure-mode 76

sh 78

system serviceos password-prompt 78

umount 79

update 80

tftp 81

version 82

ACL commands 84

ACL application 84

access-list copy 84

access-list ip 88

access-list ipv6 99

access-list log-timer 107

access-list mac 110

access-list resequence 115

access-list reset 118

apply access-list control-plane 121

apply access-list (to interface or LAG) 123

apply access-list (to interface VLAN) 125

apply access-list (to VLAN) 127

clear access-list hitcounts 128

clear access-list hitcounts control-plane 130

object-group address resequence 131

object-group address reset 131

object-group all reset 132

object-group ip address 133

object-group ipv6 address 135

object-group port 137

object-group port resequence 140

object-group port reset 140

show access-list 141

show access-list control-plane 146

show access-list hitcounts 148

show access-list hitcounts control-plane 151

show capacities 152

show capacities-status 153

show object-group 155

ACL and Policy hardware resource commands 158

show resources 158

ARP commands 163

arp inspection 163

arp inspection trust 163

arp ipv4 mac 164

arp process-grat-arp 165

clear arp 166

debug arp-security 167

ip local-proxy-arp 169

ip proxy-arp 170

ipv6 neighbor mac 171

show arp 172

show arp inspection interface 172

show arp inspection statistics 174

show arp inspection vlan 174

show arp state 175

show arp summary 177

show arp timeout 178

show arp vrf 179

show ipv6 neighbors 180

show ipv6 neighbors state 181

show tech arp-security 182

Aruba Central commands 185

aruba-central 185

aruba-central support-mode 185

configuration-lockout central managed 186

disable 187

enable 188

location-override 189

location-override-alternative 190

show aruba-central 191

show running-config current-context 194

Banner commands 196

banner 196

show banner 197

BIDIR-PIM commands 198

ip pim-bidir 198

ip pim-bidir hello-delay 199

ip pim-bidir lan-prune-delay 200

ip pim-bidir override-interval 201

ip pim-bidir propagation-delay 202

no ip pim-bidir 203

show ip pim dfe 203

show running-config pim 205

Boot commands 206

boot set-default 206

boot system 206

show boot-history 208

Cable diagnostic commands 211

diag cable-diagnostic 211

Captive portal (RADIUS) commands 214

aaa authentication port-access captive-portal-profile 214

show port-access captive-portal-profile 215

url 216

url-hash-key 217

CDP commands 220

cdp 220

clear cdp counters 221

AOS-CX 10.13 Command-Line Interface Guide | (6200 Switch Series) 5

Contents |6

clear cdp neighbor-info 221

show cdp 222

show cdp neighbor-info 223

show cdp traffic 224

Checkpoint commands 225

checkpoint auto 225

checkpoint auto confirm 226

checkpoint diff 227

checkpoint post-configuration 228

checkpoint post-configuration timeout 229

checkpoint rename 230

checkpoint rollback 231

copy checkpoint <CHECKPOINT-NAME> <REMOTE-URL> 232

copy checkpoint <CHECKPOINT-NAME> {running-config | startup-config} 233

copy checkpoint <CHECKPOINT-NAME> <STORAGE-URL> 234

copy <REMOTE-URL> checkpoint <CHECKPOINT-NAME> 235

copy <REMOTE-URL> {running-config | startup-config} 236

copy running-config {startup-config | checkpoint <CHECKPOINT-NAME>} 238

copy {running-config | startup-config} <REMOTE-URL> 239

copy {running-config | startup-config} <STORAGE-URL> 240

copy startup-config running-config 241

copy <STORAGE-URL> running-config 242

erase 244

show checkpoint <CHECKPOINT-NAME> 245

show checkpoint <CHECKPOINT-NAME> hash 247

show checkpoint post-configuration 248

show checkpoint 249

show checkpoint date 250

show running-config hash 250

show startup-config hash 251

write memory 252

Classifier policy commands 254

Classifier policy application 254

apply policy (config-if, config-lag-if, config-if-vlan, config-vlan) 254

class copy 258

class ip 260

class ipv6 267

class mac 273

class resequence 277

class reset 278

clear policy hitcounts 279

policy 281

policy copy 285

policy resequence 286

policy reset 287

show class 288

show policy 290

Client Insight Commands 295

client-insight enable 295

client-insight on-boarding event logs 295

diag-dump client-insight basic 296

show capacities client-insight-client-limit 298

show capacities-status client-insight-client-limit 299

show events -c client-insight 300

show tech client-insight 302

CLI session commands 305

alias 305

auto-confirm 306

configure terminal 307

disable 308

do 308

enable (manager context) 309

end 310

exit 310

list 311

page 311

Pipe (|) command 312

repeat 313

session-timeout 314

show session-timeout 315

show alias 315

show history 316

CLI user session management commands 318

cli-session 318

Clock commands 321

clock date 321

clock datetime 321

clock time 322

clock timezone 323

show clock 323

CoPP commands 325

Classes of traffic 325

apply copp-policy 327

class 328

clear copp-policy statistics 329

copp-policy 330

default-class 331

reset copp-policy 332

show copp-policy 333

show copp-policy factory-default 335

show copp-policy statistics 336

show tech copp 338

Debug logging commands 340

clear debug buffer 340

debug {all | <MODULE-NAME>} 341

debug db 342

debug destination 344

show debug 346

show debug buffer 347

show debug buffer vsf 348

show debug destination 349

Device fingerprinting commands 350

AOS-CX 10.13 Command-Line Interface Guide | (6200 Switch Series) 7

Contents |8

cdp 350

client device-fingerprint apply-profile 351

client device-fingerprint client-limit 352

client device-fingerprint profile 352

dhcp 353

http user-agent 354

lldp (device fingerprinting) 355

show client device-fingerprint 356

show client device-fingerprint active 358

show client device-fingerprint profile 359

Device profile commands 361

aaa authentication port-access allow-cdp-auth 361

aaa authentication port-access allow-cdp-bpdu 362

aaa authentication port-access allow-cdp-proxy-logoff 363

aaa authentication port-access allow-lldp-bpdu 364

associate cdp-group 366

associate lldp-group 367

associate mac-group 368

associate role 369

disable 369

enable 370

ignore (for CDP groups) 371

ignore (for LLDP groups) 372

ignore (for MAC groups) 373

mac-group 378

match (for CDP groups) 379

match (for LLDP groups) 380

match (for MAC groups) 382

port-access cdp-group 386

port-access device-profile 387

port-access device-profile mode block-until-profile-applied 388

port-access lldp-group 389

show port-access device-profile 390

DHCP client commands 393

ip dhcp 393

show ip dhcp 394

DHCPv4 relay commands 395

dhcp-relay 395

dhcp-relay hop-count-increment 395

dhcp-relay option 82 396

dhcp-smart-relay 397

diag-dump dhcp-relay basic 398

ip bootp-gateway 400

ip helper-address 401

show dhcp-relay 402

show dhcp-relay bootp-gateway 403

show ip helper-address 404

DHCP relay (IPv6) commands 406

dhcpv6-relay 406

dhcpv6-relay option 79 407

ipv6 helper-address 407

show dhcpv6-relay 409

show ipv6 helper-address 409

DHCP server IPv4 commands 411

authoritative 411

bootp 411

clear dhcp-server leases 413

default-router 414

dhcp-server external-storage 415

dhcp-server vrf 416

disable 417

dns-server 417

domain-name 418

enable 419

lease 420

netbios-name-server 421

netbios-node-type 422

option 422

pool 423

range 424

show dhcp-server 426

static-bind 428

DHCP server IPv6 commands 430

authoritative 430

clear dhcpv6-server leases 431

dhcpv6-server external-storage 432

dhcpv6-server vrf 433

disable 434

dns-server 434

enable 435

lease 436

option 437

pool 438

range 439

show dhcpv6-server 440

static-bind 442

DHCPv4 snooping commands 444

clear dhcpv4-snooping binding 444

clear dhcpv4-snooping statistics 445

dhcpv4-snooping 445

dhcpv4-snooping (in config-vlan context) 446

dhcpv4-snooping allow-overwrite-binding 447

dhcpv4-snooping authorized-server 448

dhcpv4-snooping event-log client 449

dhcpv4-snooping external-storage 450

dhcpv4-snooping flash-storage 451

dhcpv4-snooping max-bindings 453

dhcpv4-snooping option 82 453

dhcpv4-snooping static-attributes 455

dhcpv4-snooping trust 456

dhcpv4-snooping verify mac 457

show dhcpv4-snooping 457

show dhcpv4-snooping binding 459

show dhcpv4-snooping statistics 460

AOS-CX 10.13 Command-Line Interface Guide | (6200 Switch Series) 9

Contents |10

DHCPv6 snooping commands 462

clear dhcpv6-snooping binding 462

clear dhcpv6-snooping guard-policy statistics 463

clear dhcpv6-snooping statistics 464

dhcpv6-snooping 464

dhcpv6-snooping guard-policy 465

dhcpv6-snooping (in config-vlan context) 466

dhcpv6-snooping authorized-server 467

dhcpv6-snooping event-log client 468

dhcpv6-snooping external-storage 469

dhcpv6-snooping flash-storage 471

dhcpv6-snooping max-bindings 472

dhcpv6-snooping trust 473

match client prefix-list 474

match server access-list 475

preference 475

show dhcpv6-snooping guard-policy 476

show dhcpv6-snooping guard-policy interface 478

show dhcpv6-snooping guard-policy vlan 479

show dhcpv6-snooping 479

show dhcpv6-snooping binding 481

show dhcpv6-snooping statistics 482

DHCP options commands 483

http-proxy 483

DNS client commands 485

ip dns domain-list 485

ip dns domain-name 486

ip dns host 487

ip dns server address 488

show ip dns 489

ECMP commands 491

show ip ecmp 491

ERPS Commands 492

clear erps ring <RINGID> instance <ID> 492

clear erps statistics 492

erps ring 493

erps ring <RINGID> <port0|port1> interface 494

erps ring <RINGID> description 495

erps ring <RINGID> guard-interval 496

erps ring <RINGID> hold-off-interval 497

erps ring <RINGID> instance 498

erps ring <RINGID> instance <ID> control-vlan 499

erps ring <RINGID> instance <ID> description 500

erps ring <RINGID> instance <ID> enable 501

erps ring <RINGID> instance <ID> protected-vlans 502

erps ring <RINGID> instance <ID> protection-switch {{manual|force} <PORT0>|<PORT1>} 503

erps ring <RINGID> instance <ID> revertive 505

erps ring <RINGID> instance <ID> role 506

erps ring <RINGID> instance <ID> rpl 507

erps ring <RINGID> meg-level 508

erps ring <RINGID> parent-ring 509

erps ring <RINGID> sub-ring 510

erps ring <RINGID> tcn-propogation 511

erps ring <RINGID> transmission-interval 512

erps ring <RINGID> wtr-interval 513

show erps statistics 514

show erps status 515

show erps summary 518

EVPN commands 519

active-gateway 519

arp-suppression 521

evpn 522

mac-move-detection count timer 523

nd-suppression 524

rd 525

redistribute host-route 526

redistribute local-mac 526

redistribute local-svi 527

route-target 528

route-target {evpn} 529

show evpn evi 530

show evpn evi summary 531

show evpn evi <EVI-ID> 532

show evpn evi detail 533

show evpn evi <EVI-ID> detail 535

show evpn mac-ip 536

show evpn mac-ip evi 537

show evpn vtep-neighbor 537

show running-config evpn 538

virtual-mac 539

vlan 540

External storage commands 542

address 542

directory 543

disable 544

enable 544

external-storage 545

password (external-storage) 546

show external-storage 547

show running-config external-storage 548

type 548

username 549

vrf 550

Fault monitor commands 552

(Fault enabling/disabling) 552

action 553

apply fault-monitor profile 556

fault-monitor profile 557

show fault-monitor profile 558

show interface fault-monitor profile 559

show interface fault-monitor status 560

show running-config 561

threshold 563

AOS-CX 10.13 Command-Line Interface Guide | (6200 Switch Series) 11

Contents |12

Firmware management commands 566

copy {primary | secondary} <REMOTE-URL> 566

copy {primary | secondary} <FIRMWARE-FILENAME> 567

copy primary secondary 568

copy <REMOTE-URL> 568

copy secondary primary 570

copy <STORAGE-URL> 571

copy hot-patch 572

hot-patch 573

show hot-patch 575

apply gbp role-access-list 576

class gbp-ip 577

class gbp-ipv6 580

class gbp-mac 583

clear port-access gbp hitcounts 585

gbp enable 586

gbp role 587

gbp role infra 588

gbp role-access-list 589

port-access gbp 591

port-access role associate gbp 593

show class 594

show gbp role-mapping 595

show port-access gbp 596

show port-access gbp hitcounts 597

High Availability Commands 599

redundancy switchover 599

HTTPS server commands 601

https-server authentication certificate 601

https-server authentication password 602

https-server max-user-sessions 602

https-server rest access-mode 603

https-server rest firmware-site-distribution 604

https-server session close all 605

https-server session-timeout 606

https-server vrf 607

show https-server 608

show https-server authentication 609

ICMP commands 611

ip icmp redirect 611

ip icmp throttle 611

ip icmp unreachable 612

IGMP commands 614

ip igmp 614

ip igmp apply access-list 615

ip igmp last-member-query-interval 616

ip igmp querier 617

ip igmp querier interval 618

ip igmp querier-wait-time 619

ip igmp querier query-max-response-time 620

ip igmp robustness 621

ip igmp router-alert-check 622

ip igmp static-group 623

ip igmp version 624

ip igmp version strict 624

no ip igmp 625

show ip igmp 626

show ip igmp counters 627

show ip igmp group 629

show ip igmp groups 631

show ip igmp interface 633

show ip igmp interface counters 634

show ip igmp interface group 635

show ip igmp interface groups 637

show ip igmp interface statistics 638

show ip igmp static-groups 639

show ip igmp statistics 640

IGMP snooping commands 642

ip igmp snooping apply access list 642

ip igmp snooping (config mode) 643

ip igmp snooping filter unknown mcast 644

ip igmp snooping (interface mode) 645

ip igmp snooping preprogram-starg-flow 647

ip igmp snooping static group 649

ip igmp snooping (vlan mode) 649

show ip igmp snooping 651

In-System Programming commands 655

clear update-log 655

show needed-updates 655

Interface commands 657

allow-unsupported-transceiver 657

default interface 658

description 659

energy-efficient-ethernet 660

flow-control 661

interface 662

interface loopback 663

interface vlan 664

ip address 664

ip mtu 665

ipv6 address 666

mtu 667

persona 668

rate-interval 671

routing 672

show allow-unsupported-transceiver 673

show interface 674

show interface dom 678

show interface energy-efficient ethernet 679

show interface flow-control 680

show interface statistics 685

show interface transceiver 688

show interface utilization 691

show ip interface 692

AOS-CX 10.13 Command-Line Interface Guide | (6200 Switch Series) 13

Contents |14

show ip source-interface 694

show ipv6 interface 695

show ipv6 source-interface 696

shutdown 697

speed 698

IP Client Tracker commands 702

client track ip 702

client track ip { enable | disable | auto } 703

client track ip client-limit 704

client track ip update-interval 704

client track ip update-method probe 705

show capacities 706

show client ip { count | port | vlan } 707

IP Directed Broadcast commands 708

copy support-file feature 708

ip directed-broadcast 708

show arp 709

show ip interface 710

show ip directed-broadcast 711

IP-SLA commands 713

https 713

ip-sla responder 714

show ip-sla responder 715

show ip-sla responder results 716

show ip-sla 717

IPv6 destination guard commands 722

ipv6 destination guard 722

show ipv6 destination-guard 722

show ipv6 destination-guard statistics vlan 723

clear ipv6 destination-guard statistics vlan 724

IPv6 RA commands 726

ipv6 address <global-unicast-address> 726

ipv6 address autoconfig 727

ipv6 address link-local 728

ipv6 nd cache-limit 728

ipv6 nd dad attempts 729

ipv6 nd hop-limit 730

ipv6 nd mtu 731

ipv6 nd ns-interval 731

ipv6 nd prefix 732

ipv6 nd ra dns search-list 734

ipv6 nd ra dns server 735

ipv6 nd ra lifetime 736

ipv6 nd ra managed-config-flag 737

ipv6 nd ra max-interval 738

ipv6 nd ra min-interval 739

ipv6 nd ra other-config-flag 739

ipv6 nd ra reachable-time 740

ipv6 nd ra retrans-timer 741

ipv6 nd route 742

ipv6 nd router-preference 743

ipv6 nd suppress-ra 744

show ipv6 nd global traffic 744

show ipv6 nd interface 745

show ipv6 nd interface prefix 748

show ipv6 nd interface route 749

show ipv6 nd ra dns search-list 750

show ipv6 nd ra dns server 751

IRDP commands 752

diag-dump irdp basic 752

ip irdp 753

ip irdp holdtime 754

ip irdp maxadvertinterval 754

ip irdp minadvertinterval 755

ip irdp preference 756

show ip irdp 757

Job Scheduler commands 759

job 759

schedule 761

show job 764

show capacities (job, schedule) 767

show running-config (job, schedule) 767

show schedule 769

Key chain commands 772

accept-lifetime 772

cryptographic-algorithm 773

key 774

keychain 775

key-string 776

name 777

recv-id 778

send-lifetime 779

send-id 780

show capacities keychain 781

show keychain 782

show running-config keychain 784

L1-100Mbps downshift commands 786

downshift enable 786

show interface 787

show interface downshift-enable 791

show running-config interface 792

LACP and LAG commands 795

description 795

hash 796

interface lag 796

lacp fallback-static 798

lacp hash 798

lacp mode 799

lacp port-id 800

lacp port-priority 801

lacp rate 802

lacp system-priority 803

AOS-CX 10.13 Command-Line Interface Guide | (6200 Switch Series) 15

Contents |16

lag 804

show interface 805

show lacp aggregates 806

show lacp configuration 807

show lacp interfaces 808

show lag 812

show running-config interface lag 813

shutdown 814

vlan trunk native 815

LLDP commands 817

clear lldp neighbors 817

clear lldp statistics 817

lldp 818

lldp dot3 819

lldp dot3 eee 820

lldp dot3 mfs 820

lldp holdtime-multiplier 821

lldp management-address vlan 822

lldp management-ipv4-address 823

lldp management-ipv6-address 824

lldp med 825

lldp med location 826

lldp receive 828

lldp reinit 829

lldp select-tlv 830

lldp timer 831

lldp transmit 833

lldp txdelay 834

lldp trap enable 835

show lldp configuration 837

show lldp configuration mgmt 839

show lldp local-device 839

show lldp neighbor-info 841

show lldp neighbor-info detail 845

show lldp neighbor-info mgmt 847

show lldp statistics 849

show lldp statistics mgmt 850

show lldp tlv 851

Local AAA commands 853

aaa accounting all-mgmt 853

aaa authentication console-login-attempts 855

aaa authentication limit-login-attempts 856

aaa authentication login 857

aaa authentication minimum-password-length 858

aaa authorization commands (local) 859

show aaa accounting 861

show aaa authentication 862

show aaa authorization 863

show authentication locked-out-users 864

show ssh authentication-method 865

show user 865

ssh password-authentication 867

ssh public-key-authentication 867

user authorized-key 868

Log rotation commands 871

logging threshold 871

logrotate maxsize 873

logrotate period 874

logrotate target 874

show logrotate 876

Loop protect commands 877

loop-protect 877

loop-protect action 878

loop-protect re-enable-timer 879

loop-protect transmit-interval 880

loop-protect trap loop-detected 880

loop-protect vlan 881

show loop-protect 882

Loopback commands 886

interface loopback 886

ip address 886

ipv6 address 887

show interface loopback 888

MAC address table commands 890

clear mac-address 890

clear mac address mac move 892

clear mac-address-table 893

mac-address-table age-time 893

show mac-address-table 894

show mac-address-table address 895

show mac-address-table count 896

show mac-address-table dynamic 897

show mac-address-table interface 898

show mac-address-table lockout 899

show mac address table mac move 900

show mac-address-table mac-move 901

show mac-address-table port 903

show mac-address-table static 903

show mac-address-table vlan 904

show mac address table mac move 905

static-mac 906

MACsec commands 908

apply macsec policy 908

cipher-suite 909

clear macsec statistics 911

confidentiality 911

include-sci-tag 912

macsec policy 913

macsec selftest 915

replay-protection 915

secure-mode 916

show macsec policy 918

show macsec selftest 919

show macsec statistics 920

show macsec status 922

AOS-CX 10.13 Command-Line Interface Guide | (6200 Switch Series) 17

Contents |18

Management interface commands 925

default-gateway 925

ip static 926

nameserver 927

show interface mgmt 928

mDNS gateway commands 929

debug mdns 929

description 930

id 930

mdns-sd 931

mdns-sd apply-profile tx 932

mdns-sd enable 933

mdns-sd profile 934

mdns-sd service 934

clear mdns-sd statistics 935

sequence-number 936

show mdns-sd service-entries 937

show mdns-sd statistics 939

show mdns-sd statistics profile 939

show mdns-sd summary 940

show running-config interface 941

show running-config mdns-sd profile 942

show running-config mdns-sd service 943

Mirroring commands 944

clear mirror 944

clear mirror endpoint 944

comment 945

copy tcpdump-pcap 946

copy tshark-pcap 947

destination cpu 948

destination interface 949

destination tunnel 950

diagnostic 952

diag utilities tcpdump 953

disable 955

enable 956

mirror endpoint 957

mirror session 958

show mirror 958

show mirror endpoint 960

shutdown 961

source 962

source interface 963

source vlan 965

MKA commands (MACsec) 968

apply mka policy 968

clear mka statistics 969

data-delay-protection 970

key-server-priority 971

pre-shared-key 972

mka policy 974

show mka policy 975

show mka statistics 976

show mka status 977

transmit-interval 978

MLD snooping global configuration commands 980

ipv6 mld snooping 980

MLD snooping VLAN configuration commands 981

ipv6 mld snooping 981

ipv6 mld snooping fastlearn 982

ipv6 mld snooping fastleave vlan 982

ipv6 mld snooping filter-unknown-mcast 983

ipv6 mld snooping forced fastleave vlan 984

ipv6 mld snooping apply access-list 985

ipv6 mld snooping auto vlan 986

ipv6 mld snooping blocked vlan 987

ipv6 mld snooping forward vlan 988

ipv6 mld snooping preprogram-starg-flow 989

ipv6 mld snooping static-group 990

ipv6 mld snooping version 991

MLD snooping show commands 993

show ipv6 mld snooping 993

MLD configuration commands for interface VLAN 997

ipv6 mld 997

ipv6 mld apply access-list 997

no ipv6 mld 999

ipv6 mld querier 999

ipv6 mld querier interval 1000

ipv6 mld querier-wait-time 1001

ipv6 mld last-member-query-interval 1001

ipv6 mld querier query-max-response-time 1002

ipv6 mld robustness 1003

ipv6 mld static-group 1004

ipv6 mld version 1004

ipv6 mld version strict 1005

MLD show commands for interface VLAN 1007

show ipv6 mld 1007

MLD configuration commands for interface 1011

ipv6 mld 1011

ipv6 mld apply access-list 1011

no ipv6 mld 1013

ipv6 mld querier 1013

ipv6 mld querier interval 1014

ipv6 mld last-member-query-interval 1015

ipv6 mld querier query-max-response-time 1015

ipv6 mld robustness 1016

ipv6 mld static-group 1017

ipv6 mld version 1018

ipv6 mld version strict 1018

MSTP commands 1020

AOS-CX 10.13 Command-Line Interface Guide | (6200 Switch Series) 19

Contents |20

clear spanning-tree statistics 1020

show spanning-tree 1020

show spanning-tree detail 1022

show spanning-tree inconsistent-ports 1023

show spanning-tree mst 1024

show spanning-tree mst-config 1027

show spanning-tree mst detail 1027

show spanning-tree mst <INSTANCE-ID> 1031

show spanning-tree mst <INSTANCE-ID> detail 1032

show spanning-tree mst interface 1033

show spanning-tree summary port 1034

show spanning-tree summary root 1035

spanning-tree 1036

spanning-tree bpdu-filter 1037

spanning-tree bpdu-guard 1038

spanning-tree bpdu-guard timeout 1039

spanning-tree config-name 1040

spanning-tree config-revision 1041

spanning-tree cost 1042

spanning-tree forward-delay 1043

spanning-tree hello-time 1044

spanning-tree instance cost 1045

spanning-tree instance port-priority 1046

spanning-tree instance priority 1047

spanning-tree instance vlan 1048

spanning-tree link-type 1049

spanning-tree loop-guard 1049

spanning-tree max-age 1050

spanning-tree max-hops 1051

spanning-tree mode 1052

spanning-tree port-priority 1054

spanning-tree port-type 1055

spanning-tree priority 1056

spanning-tree root-guard 1057

spanning-tree rpvst-filter 1058

spanning-tree rpvst-guard 1059

spanning-tree tcn-guard 1060

spanning-tree transmit-hold-count 1061

spanning-tree trap 1061

Multicast datapath commands for IPv4 1064

show ip multicast bridging datapath 1064

show ip multicast routing datapath 1065

Multicast datapath commands for IPv6 1068

show ipv6 multicast bridging datapath 1068

show ipv6 multicast routing datapath 1069

Static Route commands 1072

ip multicast-static-route 1072

ip multicast-static-route (l3vni) 1074

ipv6 multicast-static-route 1075

ipv6 multicast-static-route (l3vni) 1077

redistribute static 1078

show capacities multicast static route 1079

show ip multicast-static-route 1080

Page is loading ...

Aruba 6200M Reference guide

This manual is also suitable for

Aruba 6200M Reference guide

Related papers

Other documents