Jetson Haze Folding Electric Bike Owner's manual

Designed in Brooklyn

Haze

Folding Electric Bike.

A guide for your ride.

IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE.

MODELS: JHAZE-BLK | JHAZE-BLK-OB | JHAZE-CAN-BLK | JHAZE-BLK-RA

Jetson's top two riding rules:

Be safe. Have fun!

2

Contents

Safety Warnings

Pre-Ride Safety Checklist

Warranty Coverage

Product Overview

Specs & Features

Rider Suitability

Online Resources

1. Getting Started

Unfolding & Folding the Frame

Folding & Unfolding the Stem

Attaching the Seat

Attaching the Pedals

Attaching the Handlebar

Turning the Battery On & O

Removing & Replacing the Battery

Charging the Battery

Using the Rear Wheel Lock

........................................................................................................................................................

.........................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

.....................................................................................................................................................

........................................................................................................................................................

.....................................................................................................................................................

............................................................................................................................

..............................................................................................................................

................................................................................................................................................

............................................................................................................................................

......................................................................................................................................

................................................................................................................................

......................................................................................................................

............................................................................................................................................

..................................................................................................................................

3

Tire Pressure & Inlation

2. Functions & Features

Powering On & O

Checking Battery Charge Level

Using the Lights

Using the Bell

Using the Kickstand

Tucking Away the Pedals

3. Making Moves

Riding the Haze

Using Pedal Assist

Using the Throttle

Activating Cruise Control

Traditional Biking

Using the Brakes

Maximizing Riding Range & Speed

Helmet Safety

Care & Maintenance

.......................................................................................................................................

................................................................................................................................................

...........................................................................................................................

...................................................................................................................................................

........................................................................................................................................................

.............................................................................................................................................

......................................................................................................................................

.....................................................................................................................................................

..........................................................................................................................................

.................................................................................................................................................

....................................................................................................................................

.................................................................................................................................................

..................................................................................................................................................

......................................................................................................................

.......................................................................................................................................................

................................................................................................................................................

4

• Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety

instructions. The user will be responsible for any loss or damage caused by improper use.

• To reduce the risk of injury, close supervision is necessary when the product is used near children.

• Do not put ingers or hands into the product.

• Do not use this product if the lexible power cord or output cable is frayed, has broken insulation, or any other signs of damage.

• Please check the drive system and frame before riding to ensure safety.

• Before each cycle of operation, the operator shall perform the preoperation checks speciied by the manufacturer:

That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;

That the braking system is functioning properly; That any and all Haze guards, chain guards, or other covers or guards supplied

by the manufacturer are in place and in serviceable condition; That tires are in good condition, inlated properly, and have

suicient tread remaining; The area that the product is to be operated should be safe and suitable for safe operation.

• Components shall be maintained and repaired in accordance with the manufacturer’s speciications and using only the

manufacturer’s authorized replacement parts with installation performed by dealers or other skilled persons.

• Don’t allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drive

train, while the bike is in use.

• This product should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or instruction (IEC 60335-1/A2:2006).

• Unsupervised children should not play with the product (IEC 60335-1/A2:2006).

• Adult supervision is required.

• The rider should not exceed 120.2kg (265lb).

• Never use near motor vehicle.

• Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control, or may cause

uncontrolled operator/passenger actions or reactions.

• Avoid sharp bumps, drainage grates, and sudden surface changes. Bike may suddenly stop.

• Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.

• Avoid riding around lammable gas, steam, liquid, or dust that could cause ire.

• Operators shall adhere to all of the manufacturer’s recommendations and instructions, as well as comply with all laws and

ordinances: Units without headlights shall be operated only with adequate daylight conditions of visibility, and; Owners shall

be encouraged to highlight (for conspicuity) using lighting, relectors, and for low-riding units, signal lags on lexible poles.

• Do not ride at night.

• Only ride the product with adequate daylight conditions for visibility.

• Persons with the following conditions shall be cautioned not to operate: Those with heart conditions; Pregnant women;

Persons with head, back, or neck ailments, or prior surgeries to those areas of the body; and persons with any mental or

physical conditions that may make them susceptible to injury or impair their physical dexterity or mental capabilities to

recognize, understand, and perform all of the safety instructions and to be able to assume the hazards inherent in unit use.

• Do not ride after drinking or taking prescription medication.

Safety Warnings

5

• Do not carry items when riding.

• Never operate the product while barefoot.

• Always wear shoes and keep shoelaces tied.

• Make sure your feet are always placed securely on the deck/pedal.

• Operators shall always use appropriate protective equipment, including but not limited to: a helmet with appropriate

certiication, protective clothing, knee pads, and elbow pads.

• Always give way to pedestrians.

• Be alert to things in front and far away from you.

• Do not allow distractions when riding, such as answering the phone or engaging in any other activities.

• The product cannot be ridden by more than one person.

• When riding the product along with other riders, always keep a safe distance to avoid a collision.

• When turning, be sure to maintain your balance.

• Riding with improperly adjusted brakes is dangerous and can result in serious injury or death.

• Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or

excessive application of the brake may result in injury or death.

• If the brake loosens, please adjust with the hexagon wrench, or please contact the Jetson Care Team.

• Replace worn or broken parts immediately.

• The area that the product is to be operated should be safe and suitable for safe operation.

• Check whether all safety labels are in place and understood before riding.

• The owner shall allow the use and operation of the unit after a demonstration that such operators can understand and operate

all components of the unit before use.

• Recommended for indoor use.

• Use caution when changing the batteries. Do not change batteries near lammable materials. Remove batteries from the bike

when not in use for long periods of time.

• Prolonged exposure to UV rays, rain, and the elements may damage the enclosure materials. Store indoors when not in use.

MODIFICATIONS

Do not attempt to disassemble, modify, repair, or replace the product or any components of the unit without instruction from

the Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury.

ADDITIONAL OPERATION PRECAUTIONS

• Do not lift the product o the ground while it is on and the wheels are in motion. This can result in freely spinning wheels,

which may cause injury to yourself or others nearby.

• Do not jump on or o the product, and do not jump while using it.

• Always keep your feet irmly planted on the pedals while in operation.

• The Consumer Product Safety Commission advises that the riding of small wheel diameter bicycles at excessive speeds can

lead to instability and is not recommended.

• Always wear a properly itted helmet when you ride your bicycle. Do not ride at night. Avoid riding in wet conditions.

6

CALIFORNIA PROPOSITION 65

WARNING:

This product can expose you to the chemical Cadmium which is known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go to www.P65warning.ca.gov.

MAINTENANCE PRECAUTIONS

For all maintenance repairs and needs beyond the capability of the consumer, which may include but not be limited to: such

as proper maintenance of brakes, control cables, bearing adjustments, wheel adjustments, lubrication, relectors, tires and

handlebar and seat adjustments, please contact the Jetson Care Team for assistance at:

ridejetson.com/chat

ridejetson.com/support

US & Canada 1 (888) 976-9904

DISPOSAL OF USED BATTERY

Battery may contain hazardous substances which could endanger the environment and human health. This symbol

marked on the battery and/or packaging indicates that used battery shall not be treated as municipal waste.

Batteries should be disposed of at an appropriate collection point for recycling. By ensuring the used batteries are

disposed of correctly, you will help prevent potential negative consequences for the environment and human health. The

recycling of materials will help to conserve natural resources. For more information about recycling of used batteries,

please contact your local municipality waste disposal service.

NOTICE OF COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

WARNING: Changes or modiications to this unit not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

7

Pre-Ride Safety Checks

CONDUCT THESE IMPORTANT SAFETY CHECKS BEFORE EVERY RIDE:

BRAKES

• MAKE SURE BRAKES WORK PROPERLY.

• CHECK THAT THE BRAKE PADS ARE NOT WORN, AND ARE ALIGNED AND CENTERED CORRECTLY.

• CHECK THAT THE BRAKE CONTROL LEVERS ARE LUBRICATED AND ARE SECURED TO THE HANDLEBAR.

STEERING

• CHECK THAT THE HANDLEBAR AND STEM ARE ALIGNED WITH THE FORKS, AND ARE SECURELY TIGHTENED.

CRANKS AND PEDALS

• CHECK THAT THE PEDALS ARE SECURELY TIGHTENED TO THE CRANKS AND THAT THE CRANKS ARE TIGHTENED TO THE

FRAME.

WHEELS AND TIRES

• MAKE SURE THAT THE TIRES ARE INFLATED TO WITHIN THEIR MAXIMUM RECOMMENDED TIRE PRESSURE 35  45 PSI.

• CHECK TIRES AND RIMS FOR EXCESSIVE WEAR OR ANY DAMAGE.

• CHECK THAT WHEEL SPOKES ARE NOT BROKEN AND THAT AXLE NUTS ARE TIGHT.

CAUTION: USE THE INCLUDED HAND PUMP OR A HAND OR FOOT PUMP DESIGNATED FOR BICYCLE TIRES. NEVER INFLATE

TIRES WITH AN AIR COMPRESSOR AT A GAS STATION. THIS CAN CAUSE THE TUBES TO OVERINFLATE AND BLOW OUT.

CHAIN

• MAKE SURE ALL BEARINGS ARE LUBRICATED AND RUN SMOOTHLY.

FRAME AND FORK

• CHECK THAT THE FRAME AND FORK ARE NOT DAMAGED OR BROKEN.

• CHECK THAT THE HANDLEBAR CLAMP IS TIGHT.

• MAKE SURE THAT ALL SCREWS, NUTS, AND BOLTS ARE TIGHT.

GENERAL LIMITED WARRANTY

Your new Jetson product is warranted against defects in materials and workmanship as indicated on ridejetson.com/warranty

for a period of time from the date of original retail purchase when used in accordance with Jetson's user manuals

(refer to ridejetson.com/support). Under this warranty, you will be able to direct your claims to Jetson even in situations

where you purchased the Jetson Product from one of our authorized retailers. To read the full terms of our warranty,

visit ridejetson.com/warranty.

8

Warranty Coverage

9

10

* NOT PREATTACHED; REQUIRES SETUP

Product Overview

* ADULTS MUST ASSIST CHILDREN IN THE ASSEMBLY AND INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT.

TOOLS INCLUDED:

15MM WRENCH

2BIT PHILLIPSHEAD SCREWDRIVER A AND

4MM ALLEN KEY B TOOL

A

B

1. HEADLIGHT

2. STEM FOLDING LATCH

3. HANDLEBAR*

a. LEFT HANDBRAKE

FRONT WHEEL

b. RIGHT HANDBRAKE

REAR WHEEL

c. BELL

d. HANDLEBAR CLAMP

e. FRONT REFLECTOR

f. TWIST THROTTLE

g. BATTERY INDICATOR LIGHTS

h. HEADLIGHT BUTTON

i. SPEED MODE SWITCH

j. POWER BUTTON

4. FRAME

5. FRAME FOLDING LATCH

6. SEAT*

7. REAR REFLECTOR

8. SEAT CLAMP

9. BRAKE LIGHT

10. SUSPENSION

11. FENDER (X2; FRONT AND REAR)

12. TIRE (X2; FRONT AND REAR)

13. LOCKING MAGNET

(X2; FRONT AND REAR)

14. DISK BRAKE

(X2; FRONT AND REAR)

15. REAR WHEEL LOCK

16. WHEEL REFLECTOR

(X2; FRONT AND REAR)

17. KICKSTAND

18. TIRE VALVE WITH DUST CAP

(X2; FRONT AND REAR)

19. CHAIN

20. BIKE STAND

21. PEDALS

(X2; LEFT AND RIGHT)*

22. CHARGER

23. CHARGING CABLE

24. BATTERY & WHEEL KEY (X2)

25. TIRE PUMP

26. BATTERY

(NOT SHOWN; INSTALLED IN FRAME)

27. BATTERY POWER SWITCH

28. CHARGING PORT WITH COVER

(X2; ON FRAME AND ON BATTERY)

11

22 23

25

21 20

28

19

18

24

2

1

12

10

g

i

j

a

b

cde

h

f

3

426

5

6

8

27

28

9

7

12

11

17

14

18

13 13

15

1616

14

NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.

12

Specs & Features

• UNFOLDED DIMENSIONS: 53.1″L×42.5″ H ×20.5″ W

135CM×108CM×52CM

• FOLDED DIMENSIONS: 30.1″ L×27.5″H ×17.5″W

76.5CM ×70CM×44.5CM

• WEIGHT LIMIT : 265LBS 120.2KG

• PRODUCT WEIGHT : 49 LBS 22.2 KG

• RECOMMENDED AGE : 12+ US; 16+ CANADA

• TIRE SIZE : 16″ 40.6CM

• MAX SPEED : 15.5 MPH 24.9KMH

• MAX RANGE WITH THROTTLE : 15 MILES 24.1KM

• MAX RANGE WITH PEDAL ASSIST : 20 MILES 32.2KM

• BATTERY : 48V, 7.5AH LITHIUMION

• MOTOR : 350W HUB

• CHARGER : UL LISTED 100  240V

• CHARGING TIME : UP TO 5 HOURS

• MAX CLIMBING ANGLE: 15°

• UL CERTIFICATION: UL2849

• WATER RESISTANCE RATING: IPX4

FOR SAFE AND COMFORTABLE RIDING, THERE SHOULD BE

A CLEARANCE OF AT LEAST 1  3 IN2.5  7.6 CM BETWEEN

THE CROTCH AND THE TOP TUBE OF THE BICYCLE FRAME

WHEN THE RIDER STRADDLES THE BICYCLE WITH BOTH

FEET FLAT ON THE GROUND.

1-3

inches

2.5-7.6 cm

Rider Suitability

13

1. Getting Started

STARTING NOTES:

· REMOVE ALL PACKAGING BEFORE BEGINNING ASSEMBLY.

· THE DIRECTIONS GIVEN IN THIS MANUALRIGHT, LEFT, FRONTFORWARD, AND REARBACKARE ORIENTED AS THE

RIDER WOULD SEE THEM WHEN SEATED ON THE BIKE. THE "RIGHT SIDE" OF THE BIKE, FOR EXAMPLE, IS THE SIDE WHERE

THE RIDER’S RIGHT HAND AND FOOT WILL BE.

· IT IS EASIER TO ASSEMBLE AND ADJUST YOUR BIKE WITH IT PROPPED UPRIGHT ON ITS KICKSTAND. REFER TO PAGE 45.

· REMANUFACTURED HAZES MAY ARRIVE WITH SOME ASSEMBLY STEPS ALREADY COMPLETED.

1.1 Unfolding & Folding the Frame

WHEN TO UNFOLD: FOR ASSEMBLY AND RIDING

WHEN TO FOLD: FOR STORAGE AND TRANSPORT

14

HOW TO UNFOLD:

1. POSITION THE BIKE UPRIGHT.

2. IF THE MAGNETS ON THE FRONT AND REAR WHEEL ARE COUPLED, DISCONNECT THEM BY PULLING THE FRONT AND

REAR WHEELS AWAY FROM ONE ANOTHER.

3. HOLD THE REAR OF THE BIKE STEADY WHILE YOU PIVOT THE FRONT OF THE BIKE AROUND THE HINGE POINT TO PUT THE

FRAME IN A STRAIGHT LINE.

REAR WHEEL MAGNET

FRONT WHEEL MAGNET

FRAME HINGE POINT

15

4. LOWER THE KICKSTAND AND USE IT TO PROP THE BIKE UPRIGHT. SEE PAGE 45.

KICKSTAND

16

5. HOLD THE FRAME STEADY AT THE HINGE POINT AND

FORCEFULLY PUSH THE FOLDING LATCH CLOSED AGAINST

THE BIKE FRAME.

IMPORTANT: TO ENSURE THAT THE LATCH IS PROPERLY CLOSED

AND SECURE ON THE BIKE FRAME, MAKE SURE THAT THE LATCH

"CLICKS" INTO PLACE.

16

FOLDING LATCH

FRAME

FRAME HINGE POINT

17

HOW TO FOLD:

1. PUSH THE TAB ON THE FOLDING LATCH FORWARD.

2. WITH THE TAB PUSHED FORWARD, FORCEFULLY PULL THE

FOLDING LATCH OPEN AND AWAY FROM THE BIKE FRAME.

FOLDING LATCH

FOLDING LATCH TAB

1

2

18

FRONT WHEEL

LOCKING MAGNET

REAR WHEEL LOCKING MAGNET

BIKE STAND

3. AT THE HINGE POINT, PIVOT THE FRONT OF THE BIKE AROUND TO THE LEFT UNTIL THE FRONT WHEEL IS NEXT TO THE

REAR WHEEL, AND THE MAGNETS ON THE TWO WHEELS ARE ALIGNED.

4. PUSH THE TWO WHEELS TOGETHER SO THAT THE MAGNETS CONNECT, SECURING THE BIKE IN THE FOLDED POSITION.

Page is loading ...

Jetson Haze Folding Electric Bike Owner's manual

Jetson Haze Folding Electric Bike Owner's manual

Related papers

Other documents