ROOMS TO GO 26025836 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
26025836
Type
Assembly Instructions

This manual is also suitable for

Item # : HT72MW
Assembly Instructions
  

Revised 11 /2017
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reseed. P.1
Join parts (2, 4, 6) and parts (1, 3, 5) as shown in the diagram.
Secure parts together using bolts (C) as shown.
Join side assemblies to parts (7,8,9,10, 11) as shown in the diagram.
Secure parts together using bolts (A & C) as shown. Secure angle iron (H) using bolts (C).
Secure parts together using bolts (A & C) as shown. Secure angle iron (H) using bolts (C).
Attach seat (13) to frame assembly using bolts (B) as shown in the diagram.
Attach shelf (14) to frame assembly using bolts (B) as shown in the diagram.
Secure cross beam assembly to frame using screws (E).
Attach angle supports (12) to frame using bolts (C) as shown.
Use screw (N) to secure the hook to the wooden panel (8,9).
(Optional) Insert wall plugs (J) into your wall at the indicated measurements if desired.
(Optional) Secure unit to the wall using screws (K) and washers (L) at the installation points
of wall plugs (J) from previous step.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

ROOMS TO GO 26025836 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
26025836
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents