Wasp Bar Code 330 User manual

Brand: Wasp Bar Code

Model: 330

Category: Label printers

Type: User manual

This manual is also suitable for

e. Navigate to Start>Printers and Faxes. On

the Printers and Faxes screen, right click on

the Wasp LabelWriter 330 Turbo-USB, then

select Properties:

The Properties screen appears.

f. On the Properties screen, click Print Test

Page:

g. While the test page is printing, a screen

similar to the following appears. Click OK

on the screen if the test page prints

correctly.

If it does not print correctly, click

Troubleshoot to access the Printer Help

and Support Page.

Note: The test page will consist of a

Windows Logo. The logo will appear

partially cut off on the label. This is

normal and should be a successfully

printed test page.

# 000000

Wasp

LabelWriter 330

Turbo Printer

Quick Start

Guide

© 2006 Wasp Technologies

Setting up the 330 Turbo Printer

1. Unpack

Remove the printer from the box and place it

on a stable, flat surface. The box will contain:

• Printer

• Power cord and adapter

• USB Cable

• 1 roll of labels

• Installation CD with printable documentation

2. Connect the Power

a. Plug the power cord into the power adapter

and then to the bottom of the printer (see

figure in Step 3).

b. Plug the wall plug into a grounded and surge

protected outlet or power strip.

3. Connect the USB Cable

a. Plug the USB cable into the USB Port on the

bottom of the printer:

b. Insert the power and USB cables into the

cable channel and set the printer down on

your work surface.

c. Plug the USB cable into an available USB

port on your computer. A message similar to

the following will appear:

The Found New Hardware Wizard will

appear.

4. Install the Printer

a. Insert the Installation CD. On the Found

New Hardware Wizard screen, click No, Not

This Time, then click Next:

b. Select Install the Software Automatically,

then click Next.

The install wizard will automatically search

for the Installation CD.

c. You may receive a message similar to the

one shown below:

If you receive this message, click Continue

Anyway to proceed with the installation.

The software will install.

d. When the installation is complete, click

Finish:

USB

Power

Cable Channel

1
2

Wasp Bar Code 330 User manual

Brand: Wasp Bar Code

Model: 330

Category: Label printers

Type: User manual

This manual is also suitable for

Related papers

Other documents