Peavey SCSI Interface Kit EQUINOX Owner's manual

Peavey
Brand
Peavey
Model
SCSI Interface Kit EQUINOX
Category
Car kits
Type
Owner's manual

Peavey SCSI Interface Kit EQUINOX is an accessory that enables users to connect external SCSI devices, such as hard drives or CD-ROM drives, to their EQUINOX, SK760, SK880, WK6, or WK8 keyboards. This can be useful for expanding the storage capacity of the keyboard, backing up data, or transferring files between the keyboard and other devices. The kit includes a SCSI interface board, a support bracket, screws, washers, and cables. Installation is relatively straightforward and can be completed in a few minutes.

Peavey SCSI Interface Kit EQUINOX is an accessory that enables users to connect external SCSI devices, such as hard drives or CD-ROM drives, to their EQUINOX, SK760, SK880, WK6, or WK8 keyboards. This can be useful for expanding the storage capacity of the keyboard, backing up data, or transferring files between the keyboard and other devices. The kit includes a SCSI interface board, a support bracket, screws, washers, and cables. Installation is relatively straightforward and can be completed in a few minutes.

Installation Instructions
Istruzioni per l’installazione
ENGLISH/ITALIANO code: 271238
SCSI Interface
Kit
EQUINOX
SK760 - SK880
WK6 - WK8
GENERALMUSIC
Observe precautions when handling electrostatic sensitive devices.
Accessorio opzionale installato.
Optional accessory installed.
Numero di serie apparecchio.
Device serial number.
Maneggiare con cura i dispositivi elettronici sensibili alle cariche elettrostatiche.
Data di installazione.
Installation Date.
Stamp of Service Center
Authorized by Generalmusic
Timbro Centro Assistenza
Autorizzato da Generalmusic
nearest Service Center Authorized by GENERALMUSIC. Any servicing performed by unqualified
shock and device malfunction, do not perform any user-servicing but refer all servicing to the
service personnel will forfeit all GUARANTEE rights and will exonerate GENERALMUSIC from all
These servicing instructions are for use by qualified personnel only. To reduce the risk of electric
all liabilities for damage to property or persons resulting from device malfunction.
persone o cose conseguenti dal suo malfunzionamento.
di GARANZIA ed esonererà GENERALMUSIC da ogni responsabilità su eventuali danni a
GENERALMUSIC. Ogni intervento effettuato da personale non qualificato farà decadere i diritti
personalmente queste operazioni, rivolgetevi al più vicino Centro di Assistenza Autorizzato
rischio di scosse elettriche e malfunzionamenti dell’ apparecchio, non tentate di effettuare
Le seguenti istruzioni di servizio sono ad esclusivo uso di personale qualificato. Per evitare il
ATTENZIONE
IMPORTANT: Part below to be filled in by the service center.
IMPORTANTE: Fate compilare al servizio di assistenza la parte sottostante.
ATTENZIONE
CAUTION
ATTENTION
Leggi queste note prima di procedere
Read these notes before proceeding
Sconnetti lo strumento dalla presa di corrente.
Tiralo verso te per liberarlo dalla tastiera.
(B) Pull towards you to clear the keyboard.
Rovesciare con attenzione lo strument e rimuovere le viti indicate dalle frecce.
Sollevare
(A) Lift up
Rear / Dietro
Trattenendo saldamente le parte superiore e inferiore dello strumento raddrizzarlo, afferrare le estremitˇ del
coperchio e sollevarlo seguendo le istruzioni A, B e C.
Front / Davanti
!
(C) Raise the lid, taking care not to disconnect the cables.
Sollevare il coperchio, facendo attenzione a non scollegare i cavi.
Carefully turn the instrument over and unscrew the screww marked by the arrows.
ends of the lid and lift it off by following the sequence of illustrations A, B and C.
Hold the chassis (top and bottom) tightly and turn the instrument the right way up. Grasp the extreme top
!
Disconnect the instrument from the mains.
!
WK6 and WK8
Model - Modello Instructions / Istruzioni
Opening / Apertura
Mounting Instructions M-3
ITALIANO
ENGLISH
Rear / Dietro
!
lift off the top chassis as shown in the figure with care without forcing or disconnecting the cables.
rimuovere la parte superiore come indicato in figura, attenzione a non forzare o scollegare i cavi.
SK88/880
Rear / Dietro
Front / Davanti
Carefully turn the instrument over and unscrew the screws marked by the arrows.
Hold the chassis (top & Bottom) tightly and turn the instrument the right way up,
Rovesciare con attenzione lo strumento e rimuovere le viti indicate dalle frecce.
Trattenendo saldamente le parti superiore e inferiore raddrizzare lo strumento,
Disconnect the instrument from the mains.
Sconnettere lo strumento dalla presa di corrente.
!
!
SK76/760 Front / Davanti
Attenzione a non sconnettere i cavi.
a) Be careful do not disconnect the cables.
a) Lift up.
Sollevare.
!
Instructions / Istruzioni
Opening / Apertura SK760 and SK880
Model - Modello
M-4 Mounting Instructions
ITALIANO
ENGLISH
a) Lift up.
Sollevare.
76 notes
!
!
Attenzione a non sconnettere i cavi.
a) Be careful do not disconnect the cables.
Rear / Dietro
Front / Davanti
Rear / Dietro
lift off the top chassis as shown in the figure with care without forcing or disconnecting the cables.
rimuovere la parte superiore come indicato in figura, attenzione a non forzare o scollegare i cavi.
Carefully turn the instrument over and unscrew the screws marked by the arrows.
Hold the chassis (top & Bottom) tightly and turn the instrument the right way up,
Rovesciare con attenzione lo strumento e rimuovere le viti indicate dalle frecce.
Trattenendo saldamente le parti superiore e inferiore raddrizzare lo strumento,
Disconnect the instrument from the mains.
Sconnettere lo strumento dalla presa di corrente.
ITALIANO
ENGLISH
61 notes
!
!
Front / Davanti
Instructions / Istruzioni
Opening / Apertura
Model - Modello
EQUINOX
Mounting Instructions M-5
- To install the kit into EQUINOX, SK760 or SK880
970330 - SCSI interface kit 970330 - Kit interfaccia SCSI
C) Support for SK and Equinox keyb.
D) 4 screws (M3x6)
A) SCSI interface board
Part List (supplied):
(120029)
(171453)
see FIG.1
(761177)
(120521)E) 4 grower washers 3mm E) 4 rondelle grower 3mm
Lista parti (fornite):
Instructions:
Fig.1
Istruzioni:
Tools (not supplied): Utensili (non forniti):
C) Supporto per tast. SK e Equinox
A) Scheda interfaccia SCSI
N) Phillips screwdriver N) Cacciavite a croce
O) 5.5mm vertical nut wrench O) Chiave inglese verticale 5.5mm
D) 4 viti (M3x6)
ENGLISH ITALIANO
Mounting Instructions M-6
F) 1 screw 2.9x6.5mm (120255) F) 1 vite 2.9x6.5mm
G) 34 contacts x 25cm flat cable (841183) G) Cavo piatto 34 contatti 25cm
M
(171466)
(120029)
(171453)
vedi FIG.1
H) 34 contacts x 5 cm flat cable (841152) H) Cavo piatto 34 contatti 5cm (841152)
(761177)
(120521)
(120255)
(841183)
I ) 22 cm plaited cable (841186) I ) Cavo intrecciato 22cm
L) 7.5 cm plaited cable (841185) L) Cavo intrecciato 7.5cm (841185)
(841186)
(171466)B) Support for WK keyboard B) Supporto per tastiera WK
keyboards, follow the instructions on page 9-10. o SK880 segui le istruzioni a pagina 9-10.
- Per montare il kit sulla tastiera EQUINOX o SK760
- To install the kit into WK6 or WK8 keyboards follow - Per montare il kit sulla tastiera WK6 e WK8 segui
le istruzioni a pagina 7-8.the instructions on page 7-8.
N O A
HLGIBFDEC
Instructions / Istruzioni
Mounting/Montaggio EQUINOX - WK6/8 - SK760/880
Model - Modello
- Anchor the SCSI board (A) to the support (B) using
ENGLISH ITALIANO
WK6 - WK8
Model/Modello Instructions/Istruzioni
Mounting/Montaggio
Mounting Instructions M-7
the screws (D) and washers (E) as show on fig.2. usando le viti (D) e le loro rondelle (E) come da fig.2.
- Assemblare la scheda SCSI (A) al supporto (B)
- Locate the SCSI slot cover and remove it by
- Localizzare il coperchio del vano SCSI e rimuoverlo
svitando le 3 viti che lo fissano al fondo.
- Connettere il cavo piatto (H) e il cavo intrecciato (L)
al connettore CN16 e al faston S1 sulla scheda CPU
vedi figura 3.
unscrewing the 3 screws that fix it to the chassis.
- Connect the flat cable (H) and the plaited cable (L) to
CN16 connector and S1 faston on CPU board (fig.3).
E
Fig.2
Fig.3
D
H
L
- Connect the other ends of the cables (H) and (L) to
Fig.4
Fig.5
ENGLISH ITALIANO
Mounting Instructions M-8
H
the SCSI board and to the support as show in figure 4. scheda SCSI e al supporto come da figura 4.
- Connettere l'altro capo dei cavi (H) e (L) alla
- Fix the SCSI kit to its location using the 3 previously Fissare il kit SCSI nella suo posto tramite le 3 viti
figura 5.
rimosse precedentemente e con la vite (F) come daremoved screws and the screw (F) as shown in fig.5.
- Close the instrument and check for correct SCSI - Chiudere lo strumento e controllare il corretto
operation as described in the owner’s manual. funziomento della SCSI come descritto nel
L
B
A
F
Instructions / Istruzioni
Mounting/Montaggio WK6 - WK8
Model - Modello
+
manuale d’uso in dotazione con lo strmuento.
- Anchor the SCSI board (A) to the support (C) using
ENGLISH ITALIANO
EQUINOX - SK760 - SK880
Model/Modello Instructions/Istruzioni
Mounting/Montaggio
Mounting Instructions M-9
the screws (D) and washers (E) as show on fig.2. usando le viti (D) e le loro rondelle (E) come da fig.2.
- Assemblare la scheda SCSI (A) al supporto (C)
- Locate the SCSI slot cover on the cover right side and- Localizzare il coperchio del vano SCSI sulla destra
del coperchio e rimuoverlo svitando i 2 dadi come
da figura 3.
Nota: le foto rappresentano il modello EQUINOX,
i modelli SK sono simili per le parti in oggetto.
remove it unscrewing the 2 nuts as show in fig.3.
Note: the photos show the EQUINOX model, the SK
models are similar for the parts concerned.
E
Fig.2
Fig.3
D
- Fix the SCSI kit on its location using the two previously
Fig.4
Fig.5
ENGLISH ITALIANO
Mounting Instructions M-10
removed nuts. rimossi precedentemente.
- Fissare il kit SCSI al suo posto usando i due dadi
- Connect the plaited cable (I) to S1 faston on CPU bo-
ard and the other end to S1 faston on SCSI board.
as show in figure 4.
scheda CPU e l'altro capo al faston S1 sulla scheda
SCSI come da figura 4.
- Connettere il cavo intrecciato (I) al faston S1 sulla
- Connect the flat cable (G) to CN16 connector on CPU - Collegare il cavo piatto (G) al connettore CN16
CN1 sulla scheda SCSI come da figura 5.
sulla scheda CPU e l'altro capo al connettore board and the other end to CN1 on SCSI board as
show in figure 5.
- Close the instrument and check the SCSI correct - Chiudere lo strumento e controllare il corretto
funzionamento della SCSI come descritto sull'operations as described on the supplied manual.
I
C
A
G
Instructions / Istruzioni
Mounting/Montaggio EQUINOX - SK760 - SK880
Model - Modello
+
accluso manuale.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Peavey SCSI Interface Kit EQUINOX Owner's manual

Peavey
Brand
Peavey
Model
SCSI Interface Kit EQUINOX
Category
Car kits
Type
Owner's manual

Peavey SCSI Interface Kit EQUINOX is an accessory that enables users to connect external SCSI devices, such as hard drives or CD-ROM drives, to their EQUINOX, SK760, SK880, WK6, or WK8 keyboards. This can be useful for expanding the storage capacity of the keyboard, backing up data, or transferring files between the keyboard and other devices. The kit includes a SCSI interface board, a support bracket, screws, washers, and cables. Installation is relatively straightforward and can be completed in a few minutes.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents