MSI MS-7721 User manual



FM2-A75MA-E35

FM2-A55M-E35

seres

MS-7721 (v1.x) Manboard

G52-77211X3

Europe verson



Preface

Copyrght Notce

The materal n ths document s the ntellectual property of MICRO-STAR INTERNA-

TIONAL. We take every care n the preparaton of ths document, but no guarantee s

gven as to the correctness of ts contents. Our products are under contnual mprove-

ment and we reserve the rght to make changes wthout notce.

Trademarks

All trademarks n ths manual are propertes of ther respectve owners.

MSI

®

s regstered trademark of Mcro-Star Int’l Co.,Ltd.

NVIDIA

®

s regstered trademark of NVIDIA Corporaton.

ATI

®

s regstered trademark of AMD Corporaton.

AMD

®

s regstered trademarks of AMD Corporaton.

Intel

®

s regstered trademarks of Intel Corporaton.

Wndows

®

s regstered trademarks of Mcrosoft Corporaton.

AMI

®

s regstered trademark of Amercan Megatrends Inc.

Award

®

s a regstered trademark of Phoenx Technologes Ltd.

Sound Blaster

®

s regstered trademark of Creatve Technology Ltd.

Realtek

®

s regstered trademark of Realtek Semconductor Corporaton.

JMcron

®

s regstered trademark of JMcron Technology Corporaton.

Netware

®

s regstered trademark of Novell, Inc.

Lucd

®

s trademark of LucdLogx Technologes, Ltd.

VIA

®

s regstered trademark of VIA Technologes, Inc.

ASMeda

®

s regstered trademark of ASMeda Technology Inc.

Pad, Phone, and Pod are trademarks of Apple Inc.

Revson Hstory

Revson Revson Hstory Date

V1.0 Frst release 2012/08

￭



MS-7721

Preface

Techncal Support

If a problem arses wth your system and no soluton can be obtaned from the user’s

manual, please contact your place of purchase or local dstrbutor. Alternatvely, please

try the followng help resources for further gudance.

Vst the MSI webste for techncal gude, BIOS

updates, drver updates, and other nformaton:

http://www.ms.com/servce/download

Contact our techncal sta at:

http://support.ms.com

Safety Instructons

Always read the safety nstructons carefully.

Keep ths User’s Manual for future reference.

Keep ths equpment away from humdty.

Lay ths equpment on a relable at surface before settng t up.

The openngs on the enclosure are for ar convecton hence protects the equpment

from overheatng. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source s at 110/220V before connectng the

equpment to the power nlet.

Place the power cord such a way that people can not step on t. Do not place

anythng over the power cord.

Always Unplug the Power Cord before nsertng any add-on card or module.

All cautons and warnngs on the equpment should be noted.

Never pour any lqud nto the openng that can cause damage or cause electrcal

shock.

If any of the followng stuatons arses, get the equpment checked by servce

personnel:

The power cord or plug s damaged.

Lqud has penetrated nto the equpment.

The equpment has been exposed to mosture.

The equpment does not work well or you can not get t work accordng to User’s

Manual.

The equpment has been dropped and damaged.

The equpment has obvous sgn of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60

o

C (140

o

F),

IT MAY DAMAGE THE EQUIPMENT.

￭

◯

￭

v

Preface

CE Conformty

Hereby, Mcro-Star Internatonal CO., LTD declares that ths devce s

n complance wth the essental safety requrements and other relevant

provsons set out n the European Drectve.

FCC-B Rado Frequency Interference Statement

Ths equpment has been tested and found to comply wth the lmts for a Class B dgtal

devce, pursuant to Part 15 of the FCC Rules. These lmts are desgned to provde

reasonable protecton aganst harmful nterference n a resdental nstallaton. Ths

equpment generates, uses and can radate rado frequency energy and, f not nstalled

and used n accordance wth the nstructons, may cause harmful nterference to rado

communcatons. However, there s no guarantee that nterference wll not occur n a

partcular nstallaton. If ths equpment does cause harmful nterference to rado or

televson recepton, whch can be determned by turnng the equpment o and on, the

user s encouraged to try to correct the nterference by one or more of the measures

lsted below.

Reorent or relocate the recevng antenna.

Increase the separaton between the equpment and recever.

Connect the equpment nto an outlet on a crcut derent from that to whch the

recever s connected.

Consult the dealer or an experenced rado/televson techncan for help.

Notce 1

The changes or modcatons not expressly approved by the party responsble for

complance could vod the user’s authorty to operate the equpment.

Notce 2

Shelded nterface cables and A.C. power cord, f any, must be used n order to comply

wth the emsson lmts.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

◯

Ths devce comples wth Part 15 of the FCC Rules. Operaton s subject to the followng

two condtons:

ths devce may not cause harmful nterference, and

ths devce must accept any nterference receved, ncludng nterference that may

cause undesred operaton.

1)

2)

Mcro-Star Internatonal

MS-7721

v

MS-7721

Preface

Radaton Exposure Statement

Ths equpment comples wth FCC radaton exposure lmts set forth for an uncon-

trolled envronment. Ths equpment and ts antenna should be nstalled and operated

wth mnmum dstance 20 cm between the radator and your body. Ths equpment and

ts antenna must not be co-located or operatng n conjuncton wth any other antenna

or transmtter.

European Communty Complance Statement

The equpment comples wth the RF Exposure Requrement 1999/519/EC, Councl

Recommendaton of 12 July 1999 on the lmtaton of exposure of the general publc

to electromagnetc elds (0–300GHz). Ths wreless devce comples wth the R&TTE

Drectve.

Tawan Wreless Statements

無線設備警告聲明

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻

率、加大功率或變更原設計之特性及功能。

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立

即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線

電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之

干擾。

警告使用者:這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在

這種情況下，使用者會被要求採取某些適當的對策。

Japan VCCI Class B Statement

クラス B 情報技術装置

この装置は、情報技術装置等電波障害自主規制協議会（VCCI）の基準に基づくクラ

スB情報技術装置です。この装置が家庭内でラジオやテレビジョン受信機に近接して

使われると、受信障害を引き起こすことがあります。取扱説明書にしたがって正しい

取り扱いをしてください。

Korea Warnng Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음

v

Preface

Calforna, USA:

The button cell battery may contan perchlorate materal and requres

specal handlng when recycled or dsposed of n Calforna.

For further nformaton please vst:

http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Tawan:

For better envronmental protecton, waste batteres should be collected

separately for recyclng or specal dsposal.

廢電池請回收

European Unon:

Batteres, battery packs, and accumulators should not be dsposed of as

unsorted household waste. Please use the publc collecton system to

return, recycle, or treat them n complance wth the local regulatons.

Battery Informaton

Chemcal Substances Informaton

In complance wth chemcal substances regulatons, such as the EU REACH Regula-

ton (Regulaton EC No. 1907/2006 of the European Parlament and the Councl), MSI

provdes the nformaton of chemcal substances n products at:

http://www.ms.com/html/popup/csr/evmtprtt_pcm.html

CAUTION: There s a rsk of exploson, f battery s ncorrectly replaced.

Replace only wth the same or equvalent type recommended by the manufacturer.

v

MS-7721

Preface

WEEE (Waste Electrcal and Electronc Equpment) Statement

ENGLISH

To protect the global envronment and as an envronmentalst, MSI must re-

mnd you that...

Under the European Unon (“EU”) Drectve on Waste Electrcal and Electron

-

c Equpment, Drectve 2002/96/EC, whch takes eect on August 13, 2005,

products of “electrcal and electronc equpment” cannot be dscarded as mu-

ncpal wastes anymore, and manufacturers of covered electronc equpment

wll be oblgated to take back such products at the end of ther useful lfe. MSI wll com-

ply wth the product take back requrements at the end of lfe of MSI-branded products

that are sold nto the EU. You can return these products to local collecton ponts.

DEUTSCH

Hnwes von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Rchtlne 2002/96/EG über Elektro- und Elektronk-Altgeräte dürfen Elek

-

tro- und Elektronk-Altgeräte ncht mehr als kommunale Abfälle entsorgt werden. MSI

hat europawet verschedene Sammel- und Recyclngunternehmen beauftragt, de n

de Europäsche Unon n Verkehr gebrachten Produkte, am Ende senes Lebenszyklus

zurückzunehmen. Btte entsorgen Se deses Produkt zum gegebenen Zetpunkt aus-

schlesslch an ener lokalen Altgerätesammelstelle n Ihrer Nähe.

FRANÇAIS

En tant qu’écologste et an de protéger l’envronnement, MSI tent à rappeler cec...

Au sujet de la drectve européenne (EU) relatve aux déchets des équpement élec

-

trques et électronques, drectve 2002/96/EC, prenant eet le 13 août 2005, que les

produts électrques et électronques ne peuvent être déposés dans les décharges ou

tout smplement ms à la poubelle. Les fabrcants de ces équpements seront oblgés de

récupérer certans produts en n de ve. MSI prendra en compte cette exgence relatve

au retour des produts en n de ve au sen de la communauté européenne. Par con-

séquent vous pouvez retourner localement ces matérels dans les ponts de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13

августа 2005 года, изделия, относящиеся к электрическому и электронному

оборудованию, не могут рассматриваться как бытовой мусор, поэтому

производители вышеперечисленного электронного оборудования обязаны

принимать его для переработки по окончании срока службы. MSI обязуется

соблюдать требования по приему продукции, проданной под маркой MSI на

территории EC, в переработку по окончании срока службы. Вы можете вернуть

эти изделия в специализированные пункты приема.

Page is loading ...

Englsh

FM2-A75MA-E35

FM2-A55M-E35

Seres

En-2

MS-7721 Manboard

Manboard Speccatons

Processor Support

AMD

®

A10/A8/A6/A4-seres processors for the FM2 package

Chpset

AMD

®

A75/ A55 chpset

Memory Support

2x DDR3 DIMMs support DDR3 2133(OC)/ 1866/ 1600/ 1333/ 1066 DRAM (16GB

Max)

Supports Dual-Channel mode

LAN

Supports LAN 10/100/1000 Fast Ethernet by Realtek

®

RTL8111E

Audo

Integrated HD audo codec by Realtek

®

ALC887

8-channel audo wth jack sensng

SATA

6x SATA 6Gb/s ports by AMD

®

A75 (FM2-A75MA-E35)

6x SATA 3Gb/s ports by AMD

®

A55 (FM2-A55M-E35)

RAID

SATA1~6 support RAID 0/ 1/ 10/ JBOD by AMD

®

A75/ A55

USB 3.0 (FM2-A75MA-E35)

2x USB 3.0 rear IO ports by AMD

®

A75

1x USB 3.0 onboard connector by AMD

®

A75

Connectors & Buttons

Back panel

1x PS/2 keyboard/ mouse port

6x USB 2.0 ports, 2x USB 3.0 ports (FM2-A75MA-E35)

8x USB 2.0 ports (FM2-A55M-E35)

1x LAN port

1x VGA port*

1x DVI-D port* supportng Dual-lnk DVI.

1x HDMI port*

6x audo ports

* Ths platform supports dual-dsplay functon (HDMI+VGA, HDMI+DVI, VGA+DVI)

and trple-dsplay functon (HDMI+VGA+DVI).

On-Board

2x USB 2.0 connectors,1x USB 3.0 connector (FM2-A75MA-E35)

3x USB 2.0 connectors (FM2-A55M-E35)

1x Front Panel Audo connector

1x TPM Module connector

1x Parallel connector

1x Seral connector

1x Chasss Intruson connector

■

-

■

-

En-3

Englsh

Slots

1x PCIe 2.0 x16 slot

2x PCIe 2.0 x1 slots

1x PCI slot

Form Factor

Mcro-ATX (24.4 cm X 22.8 cm)

Mountng Screw Holes

6x mountng holes

Dual-Graphcs

Supports AMD

®

Dual Graphcs Technology

Please vst the AMD ocal webste to nd the supported Dual Graphcs combna-

tons of APU and dscrete GPU for achevng ths technology.

■

-

For the latest nformaton about processors, please

vst http://www.ms.com/servce/cpu-support

For more nformaton on compatble components, please vst

http://www.ms.com/servce/test-report

If you need to purchase accessores and request the part numbers, you could search

the product web page and nd detals on our web address below

http://www.ms.com/ndex.php

En-4

MS-7721 Manboard

Connectors Quck Gude

Back Panel

APU

CPUFAN

JPWR1

SYSFAN1

SATA1~6

JFP2

JCI1

JTPM1

JCOM1

JLPT1

DIMM1

DIMM2

JFP1

JUSB3

JUSB2

JUSB1

JUSB_PW1

JBAT1

JAUD1

PCI1

PCI_E3

PCI_E2

PCI_E1

SYSFAN2

JPWR2

JUSB_PW2

En-5

Englsh

Connectors Reference Gude

Port Name Port Type Page

Back Panel En-6

APU FM2 APU Socket En-

8

CPUFAN,SYSFAN1~2 Fan Power Connectors En-1

8

DIMM1~2 DDR3 Memory Slots En-1

3

JAUD1 Front Panel Audo Connector En-1

9

JBAT1 Clear CMOS Jumper En-2

5

JCI1 Chasss Intruson Connector En-2

3

JCOM1 Seral Port Connector En-2

1

JFP1, JFP2 Front Panel Connectors En-1

9

JLPT1 Parallel Port Header En-2

1

JPWR1 ATX 24-pn Power Connector En-1

2

JPWR2 ATX 4-pn Power Connector En-1

2

JTPM1 TPM Module connector En-2

0

JUSB_PW1~2 USB power Jumper En-2

4

JUSB1 USB 3.0/ 2.0 Expanson Connector En-2

2

JUSB2~3 USB 2.0 Expanson Connectors En-2

0

PCI_E1 PCIe x16 Expanson Slot

En-15

PCI_E2, 3 PCIe x1 Expanson Slots En-1

5

PCI PCI Expanson Slot

En-15

SATA1~6 SATA 6Gb/s / 3Gb/s Connectors En-1

7

En-6

MS-7721 Manboard

Back Panel Quck Gude

Mouse/Keyboard

A combnaton PS/2

®

mouse/keyboard DIN connector for a PS/2

®

mouse/keyboard.

USB 2.0 Port

The USB 2.0 port s for attachng USB 2.0 devces such as keyboard, mouse, or other

USB 2.0-compatble devces.

USB 3.0 Port (FM2-A75MA-E35)

USB 3.0 port s backward-compatble wth USB 2.0 devces. It supports data transfer

rate up to 5 Gbt/s (SuperSpeed).

Important

In order to use USB 3.0 devces, you must connect to a USB 3.0 port. If a USB cable s

used, t must be USB 3.0 complant.

LAN

The standard RJ-45 LAN jack s for connectng to a

Local Area Network (LAN).

LED Color LED State Condton

Left Yellow O LAN lnk s not establshed.

On(Steady) LAN lnk s establshed.

On(ashng) The computer s communcatng wth another computer on the

network.

Rght

Green O 10 Mbts/sec data rate

On 100 Mbts/sec data rate

Orange On 1000 Mbts/sec data rate

▶

LAN

Lne-In

Lne-Out

Mc

RS-Out

CS-Out

SS-Out

USB 2.0 Port

USB 3.0 Port

(FM2-A75MA-E35)

USB 2.0 Port

(FM2-A55M-E35)

VGA Port

DVI-D Port

Yellow Green/ Orange

USB 2.0 Port

Mouse/Keyboard

HDMI Port USB 2.0 Port

En-7

Englsh

VGA Port

The DB15-pn female connector s provded for montor.

DVI-D Port

The DVI-D (Dgtal Vsual Interface- Dgtal) connector can be connected to a LCD mon

-

tor, or a CRT montor wth an adapter. To connect a montor, please refer to the mon-

tor’s manual for more nformaton.

HDMI Port

The Hgh-Denton Multmeda Interface (HDMI) s an all-dgtal audo-vdeo nterface

that s capable of transmttng uncompressed streams. HDMI supports all types of TV

formats, ncludng standard, enhanced, or hgh-denton vdeo, plus mult-channel

dgtal audo on a sngle cable.

Important

Ths platform supports dual-dsplay functon (HDMI+VGA, HDMI+DVI, VGA+DVI) and

trple-dsplay functon (HDMI+VGA+DVI).

HDMI+VGA HDMI+DVI VGA+DVI HDMI+VGA+DVI

Extend mode

(Extend the desktop to the second montor)

◯ ◯ ◯ ◯

Clone mode

(Two montors have the same screen)

◯ ◯ ◯ ◯

Audo Ports

These connectors are used for audo devces. The color of the jack refers to the functon

of the connector.

Blue-Lne n: Used for connectng external audo outputtng devces.

Green- Lne out: Used as a connector for speakers or headphone.

Pnk- Mc: Used as a connector for a mcrophone.

Black- RS-Out: Rear surround sound lne out n 4/ 5.1/ 7.1 channel mode.

Orange- CS-Out: Center/ subwoofer lne out n 5.1/ 7.1 channel mode.

Gray- SS-Out: Sde surround sound lne out n 7.1 channel mode.

▶

■

En-8

MS-7721 Manboard

APU (Accelerated Processng Unts)

Important

Overheatng

Overheatng can serously damage the APU and manboard. Always make sure the

coolng fans work properly to protect the APU from overheatng. Be sure to apply an

even layer of thermal paste (or thermal tape) between the APU and the heatsnk to

enhance heat dsspaton.

Replacng the APU

When replacng the APU, always turn o the system’s power supply and unplug the

power supply’s power cord to ensure the safety of the APU.

Overclockng

Ths manboard s desgned to support overclockng. Before attemptng to overclock,

please make sure that all other system components can tolerate overclockng. Any at

-

tempt to operate beyond product speccatons s not recommend. MSI does not guar-

antee the damages or rsks caused by nadequate operaton beyond product specca-

tons.

Gold trangle

Introducton to FM2 APU

The surface of APU. Remember to apply some thermal paste on t for better heat

dsperson.

En-9

Englsh

APU & Cooler Installaton

When you are nstallng the APU, make sure the APU has a cooler attached on the top

to prevent overheatng. Meanwhle, do not forget to apply some thermal paste on APU

before nstallng the heat snk/cooler fan for better heat dsperson.

Follow the steps below to nstall the APU & cooler correctly. Wrong nstallaton wll

cause the damage of your APU & manboard.

Pull the lever sdeways away from

the socket. Make sure to rase the

lever up to a 90-degree angle.

1.

Look for the gold arrow of the APU.

The gold arrow should pont as

shown n the pcture. The APU can

only t n the correct orentaton.

2.

If the APU s correctly nstalled, the

pns should be completely embedded

nto the socket and can not be seen.

Please note that any volaton of the

correct nstallaton procedures may

cause permanent damages to your

manboard.

3. Press the APU down rmly nto the

socket and close the lever. As the

APU s lkely to move whle the lever

s beng closed, always close the

lever wth your ngers pressng tghtly

on top of the APU to make sure the

APU s properly and completely

embedded nto the socket.

4.

En-10

MS-7721 Manboard

Poston the coolng set onto the

retenton mechansm.

Hook one end of the clp to hook

rst.

5. Then press down the other end of the

clp to fasten the coolng set on the

top of the retenton mechansm.

Locate the Fx Lever and lft up t .

6.

Fasten down the lever.7. Attach the APU Fan cable to the APU

fan connector on the manboard.

8.

Important

Whle dsconnectng the Safety Hook from the xed bolt, t s necessary to keep an

eye on your ngers, because once the Safety Hook s dsconnected from the xed

bolt, the xed lever wll sprng back nstantly.

Conrm that the APU cooler has formed a tght seal wth the APU before bootng

your system.

Please refer to the documentaton n the APU cooler package for more detals about

APU cooler nstallaton.

•

En-11

Englsh

Mountng Screw Holes

When nstallng the manboard, rst nstall the necessary mountng stands requred for

an manboard on the mountng plate n your computer case. If there s an I/O back plate

that came wth the computer case, please replace t wth the I/O backplate that came

wth the manboard package. The I/O backplate should snap easly nto the computer

case wthout the need for any screws. Algn the mountng plate’s mountng stands wth

the screw holes on the manboard and secure the manboard wth the screws provded

wth your computer case. The locatons of the screw holes on the manboard are shown

below. For more nformaton, please refer to the manual that came wth the computer

case.

Important

Install the manboard on a at surface free from unnecessary debrs.

To prevent damage to the manboard, any contact between the manboard crcutry

and the computer case, except for the mountng stands, s prohbted.

Please make sure there are no loose metal components on the manboard or wthn

the computer case that may cause a short crcut of the manboard.

•

The I/O ports should be facng toward

the rear of the computer case. They

should lne up wth the holes on the

I/O backplate.

En-12

MS-7721 Manboard

Power Supply

JPWR1: ATX 24-pn Power Connector

Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX

24-pn power supply, algn the power supply cable wth the connector and rmly press

the cable nto the connector. If done correctly, the clp on the power cable should be

hooked on the manboard’s power connector.

13.+3.3

V

1.+3.3

V

14.-12V

2.+3.3

V

15.Ground

3

.Ground

16.PS-ON

#

4.+5

V

17.Ground

5

.Ground

18.Ground

6.+5

V

19.Ground

7

.Ground

22.+5

V

10.+12V

20.Res

8.PW

R O

K

23.+5

V

11

.+12V

21.+5

V

9.5VSB

24.Ground

12.+3.3

V

JPWR2: ATX 4-pn Power Connector

Ths connector provdes 12V power to the APU.

4.+12V

2

.Ground

3.+12V

1

.Ground

Important

Make sure that all the power cables are securely connected to a proper ATX power sup-

ply to ensure stable operaton of the manboard.

En-13

Englsh

Memory

These DIMM slots are used for nstallng memory modules. For more nformaton on

compatble components, please vst http://www.ms.com/servce/test-report

DDR3

240-pn, 1.5V

48x2=96 pn 72x2=144 pn

Dual-Channel mode Populaton Rule

In Dual-Channel mode, the memory modules can transmt and receve data wth two

data bus channels smultaneously. Enablng Dual-Channel mode can enhance system

performance. The followng llustratons explan the populaton rules for Dual-Channel

mode.

1

DIMM1

DIMM2

Important

DDR3 memory modules are not nterchangeable wth DDR2, and the DDR3 standard

s not backward compatble. Always nstall DDR3 memory modules n DDR3 DIMM

slots.

To ensure system stablty, memory modules must be of the same type and densty

n Dual-Channel mode.

Due to chpset resource usage, the system wll only detect up to 15+ GB of memory

(not full 16 GB) when all DIMM slots have 8GB memory modules nstalled.

•

Installed

Empty

Page is loading ...

MSI MS-7721 User manual

MSI MS-7721 User manual

in other languages

Related papers

Other documents