Horizon Fitness Evolve 5 User guide

Page is loading ...

32

3 ENGLISH

16 FRANÇAIS

30 ESPAÑOL

ELLIPTICAL OPERATION

This section explains how to use your elliptical’s console and programming.

The BASIC OPERATION section in the ELLIPTICAL GUIDE has instructions for the following:

• LOCATION OF THE ELLIPTICAL

• POWER/GROUNDING INSTRUCTIONS

• FOOT POSITIONING

• MOVING THE ELLIPTICAL

• LEVELING THE ELLIPTICAL

• POWER/MANUAL INCLINE OPERATION

• USING THE HEART RATE FUNCTION

HZ14_OG_Evolve_3_5_Rev1_2.indd 2-3 8/13/14 10:02 AM

54

EVOLVE

3

EVOLVE 3 CONSOLE OPERATION

Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.

A) LCD DISPLAY WINDOW: time, distance, speed, calories, RPM, Watts, level, and heart rate.

B) START/PAUSE KEY: press to start workout and pause workout.

C) ENTER KEY: press to confirm selection during programming setup.

D) CHANGE DISPLAY: press to change display feedback during workout.

E) RESISTANCE

KEYS: press to adjust resistance level.

F) QUICK KEYS: used to reach desired resistance level quickly.

G) SPEAKERS: plays music through speakers when connected to your media player.

H) READING RACK: holds reading material.

I) WI-FI CONNECT & SYNC: press to reset and connect your wireless internet connection. See Page 8 for more info.

J) PASSPORT CONNECT & SYNC: press to reset and connect your Passport box for Virtual Active programming.

K) VOLUME: used to adjust volume up or down.

L) AUDIO IN JACK: plug your media player into the console using the included audio adaptor cable.

M) ENERGY SAVER LIGHT: indicates if machine is in Energy Saver mode.

EVOLVE

3

G

J

K

L E

F

I

M

A

D C

B

H

HZ14_OG_Evolve_3_5_Rev1_2.indd 4-5 8/13/14 10:02 AM

76

EVOLVE

5

EVOLVE 5 CONSOLE OPERATION

Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.

A) LCD DISPLAY WINDOW: time, distance, speed, calories, RPM, Watts, level, and heart rate.

B) START/PAUSE KEY: press to start workout and pause workout.

C) ENTER KEY: press to confirm selection during programming setup.

D) CHANGE DISPLAY: press to change display feedback during workout.

E) RESISTANCE

KEYS: press to adjust resistance level.

F) QUICK KEYS: used to reach desired resistance level quickly.

G) SPEAKERS: plays music through speakers when connected to your media player.

H) READING RACK: holds reading material.

I) WI-FI CONNECT & SYNC: press to reset and connect your wireless internet connection. See Page 8 for more info.

J) PASSPORT CONNECT & SYNC: press to reset and connect your Passport box for Virtual Active programming.

K) VOLUME: used to adjust volume up or down.

L) AUDIO IN JACK: plug your media player into the console using the included audio adaptor cable.

M) ENERGY SAVER LIGHT: indicates if machine is in Energy Saver mode.

EVOLVE

5

G

J

K

L E

F

I

M

A

D C

B

H

HZ14_OG_Evolve_3_5_Rev1_2.indd 6-7 8/13/14 10:02 AM

98

DISPLAY WINDOW

• TIME: Shown as minutes : seconds. View the time remaining or the time elapsed in your workout.

• SPEED: Shown as MPH. Indicates how fast the foot pads is moving.

• CALORIES: Total calories burned or remaining for your workout.

• DISTANCE: Shown as miles. Indicates distance traveled or distance remaining during your workout.

• RPM: Rotations Per Minute.

• WATTS: Displays current user power output.

• LEVEL: Shows the current level of resistance.

• HEART RATE: Shown as BPM (beats per minute). Used to monitor your heart rate (displayed when contact is made with

both pulse grips).

A) CARDIOCOMPASS™ HEART RATE WHEEL: Displays what activity zone you are in during your workout.

• WARM UP: 0-60% of maximum heart rate

• WEIGHT LOSS: 60-70% of maximum heart rate

• IMPROVE FITNESS: 70-80% of maximum heart rate

• IMPROVE PERFORMANCE: 80-90% of maximum heart rate

• MAXIMUM PERFORMANCE: 90-100% of maximum heart rate

B) PROGRAM PROFILE: Represents the profile of the program being used (resistance during resistance based programs and

incline during incline based programs).

C) PASSPORT: Indicates Passport box connection is present.

D) WI-FI: Indicates wireless connection is present and the strength (low, medium, high).

A

EVOLVE 3 DISPLAY

EVOLVE 5 DISPLAY

A

C

D

B

HZ14_OG_Evolve_3_5_Rev1_2.indd 8-9 8/13/14 10:02 AM

1110

GETTING STARTED

1) Check to make sure no objects are nearby that will hinder the movement of the elliptical.

2) Plug in the power cord.

3) Select your xID account, User, Guest, or Edit a User using

and press ENTER.

4) When you log in for the first time as User 1-4, you will be prompted to enter your xID information.

a) Enter your xID account number using

and press ENTER

to select the numbers. Press ENTER

after each

input to move to the next digit. After the final input, press ENTER.

b) Enter your passcode using to select the numbers. Press ENTER

after each input to move to the next digit.

After the final input, press ENTER twice.

c) If you key the incorrect number at any point while entering your xID or passcode, press and hold CHANGE

DISPLAY for 3-5 seconds to clear the selection and begin again.

A) QUICK START

Simply press START to begin working out. Time will count up from 0:00. The resistance level will default to level 1.

B) SELECT A PROGRAM

1) Select a PROGRAM using

and press ENTER.

2) Set workout program information using

and press ENTER after each selection.

3) Press START to begin workout.

NOTE: You can adjust the resistance level during your workout.

C) FINISHING YOUR WORKOUT

When your workout is complete, the console will display “workout complete” and beep.

Your workout information will stay displayed on the console for 30 seconds and then reset.

TO CLEAR CURRENT SELECTION

To clear the current program selection or screen, press and hold ENTER for 3 seconds.

SET UP XID ACCOUNT FOR VIA FIT

™

CONNECTIVITY

Creating an xID account will allow you to save and share workout data using the Via Fit Wi-Fi. Up to four users can be

saved on a machine. This process is the first step in connecting your equipment. It must be done from a computer, tablet,

or mobile device.

1) Visit the web site: www.ViaFitness.com

2) Once at the web site, select the CONNECT YOUR EQUIPMENT option on the top menu bar.

3) The first step in connecting your equipment will to be creating your xID account. This will be your login to Via Fit.

4) Enter your phone number or another easy-to-remember 10-14 digit number. This will be your account number.

5) Fill in your profile information to finish the xID account set up process. You will be asked to provide an email address

not associated with any other xID account. Check your email after the set-up process for a link to validate your

account.

CONNECT WI-FI

Once you have created your xID account, you will be able to move on to activating the Wi-Fi on your equipment. Reminder,

this requires you to use your computer, tablet, or mobile device that is connected to the internet.

1) Press and hold for 3-5 seconds until you see the message ACTIVATED on your screen.

2) On your computer or other device, go to your Wi-Fi settings. You should select the network with your model name.

Doing this enables you to connect your equipment to your wireless network.

3) A new window will pop up with the list of wireless networks your equipment can see. Select your home Wi-Fi network

and connect.

4) The remaining step is to reconnect your computer or other device back to your Wi-Fi network. Go to your settings again

and connect as you normally would.

Congratulations! You are now connected and ready to get started.

HZ14_OG_Evolve_3_5_Rev1_2.indd 10-11 8/13/14 10:02 AM

1312

PROGRAM INFORMATION

MANUAL: Adjust your resistance level manually during workout. User sets time and starting resistance level.

CALORIES: Set goals for burning calories with six (Evolve 3) or nine (Evolve 5) workouts. Choose from

100, 200, 300, 400, 500, 600, and (Evolve 5 only) 700, 800, or 900 calorie burn workouts. User sets starting

resistance level. Calories burned are calculated using weight input of user profile.

DISTANCE: Push yourself and go further during your workout with 10 distance workouts. Choose from 1 mile,

2 miles, 5k, 5miles, 10k, 8 miles, 15k, 10 miles, 20k, and half marathon goals. User sets starting resistance level.

STEPS: Promotes healthy activity with 10 step-based workouts calculated using average stride length. Choose

from 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000, and 10,000 step workouts. User sets starting

resistance level. Press ENTER to see step count.

INTERVALS: An effective fat-burning workout that helps you improve your fitness level. Choose from speed

intervals and endurance intervals.

PERFORMANCE: Challenge yourself with targeted performance workouts intent on helping you improve

specific training elements. Choose from constant watts, interval watts, target heart rate zone* and % target heart

rate* workouts. (* Evolve 5 only.)

CUSTOM (EVOLVE 5 ONLY): Lets you create and reuse a perfect workout for you with specific resistance and

time combination. The ultimate in personal programming. Time-based goal. Your custom workout will be saved

automatically.

PROGRAM CHARTS

ENDURANCE INTERVALS

WARM UP PROGRAM SEGMENTS - REPEAT COOL DOWN

Seconds 60 60 60 60 30 60 60 30 30 60 30 60 60 30 30 60 60 60 60 60

Level 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

1 1 1 2 2 1 2 3 2 1 2 3 2 1 2 3 2 1 1 1 1

2 1 2 2 3 2 3 4 3 2 3 4 3 2 3 4 3 2 1 1 1

3 2 2 3 3 3 4 5 4 3 4 5 4 3 4 5 4 3 1 1 1

4 2 3 3 4 4 5 6 5 4 5 6 5 4 5 6 5 4 1 1 1

5 3 4 4 4 5 6 7 6 5 6 7 8 7 6 7 6 5 3 2 1

6 3 5 4 5 6 7 8 7 6 7 8 7 6 7 8 7 6 3 2 1

7 4 5 5 5 6 7 7 8 8 7 7 6 7 7 8 8 7 3 2 1

SPEED INTERVALS

WARM UP PROGRAM SEGMENTS - REPEAT COOL DOWN

Seconds 60 60 60 60 30 60 60 30 30 60 30 60 60 30 30 60 60 60 60 60

Level 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

1 1 2 2 3 5 1 1 5 5 1 5 1 1 5 5 1 3 2 2 1

2 1 2 2 3 6 2 2 6 6 2 6 2 2 6 6 2 3 2 2 1

3 1 2 2 4 7 3 3 7 7 3 7 3 3 7 7 3 4 2 2 1

4 1 2 2 5 8 4 4 8 8 4 8 4 4 8 8 4 5 2 2 1

5 2 3 5 6 9 5 5 9 9 5 9 5 5 9 9 5 6 5 3 2

6 2 3 5 7 10 6 6 10 10 6 10 6 6 10 10 6 7 5 3 2

7 2 3 5 8 11 7 7 11 11 7 11 7 7 11 11 7 8 5 3 2

8 2 3 5 9 12 8 8 12 12 8 12 8 8 12 12 8 9 5 3 2

9 3 4 5 10 13 9 9 13 13 9 13 9 9 13 13 9 10 5 4 3

10 3 4 8 11 14 10 10 14 14 10 14 10 10 14 14 10 11 8 4 3

11 3 6 10 12 15 11 11 15 15 11 15 11 11 15 15 11 12 10 6 3

12 3 6 10 13 16 12 12 16 16 12 16 12 12 16 16 12 13 10 6 3

13 5 9 13 14 17 13 13 17 17 13 17 13 13 17 17 13 14 13 9 5

14 5 9 13 15 18 14 14 18 18 14 18 14 14 18 18 14 15 13 9 5

15 5 9 13 16 19 15 15 19 19 15 19 15 15 19 19 15 16 13 9 5

16 5 9 13 17 20 16 16 20 20 16 20 16 16 20 20 16 17 13 9 5

HZ14_OG_Evolve_3_5_Rev1_2.indd 12-13 8/13/14 10:02 AM

1514

USING YOUR MEDIA PLAYER

1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on the left of the console and the

headphone jack on your media player.

2) Use your media player buttons to adjust song settings.

3) Remove the AUDIO ADAPTOR CABLE when not in use.

ENERGY SAVER (STANDBY MODE)

This machine has a special feature called Energy Saver mode. This mode is NOT automatically activated.

When Energy Saver mode is activated, the display will automatically enter standby mode (Energy Saver mode) after

15 minutes of inactivity. This feature saves energy by disabling most power to the machine until a key is pressed on

the console. This feature can be turned on or off in the engineering menu.

To enter the engineering menu, press and hold the RESISTANCE key and RESISTANCE key for 3-5 seconds.

Use

to navigate to SWITCH FUNCTION and press ENTER. Press ENTER to select Energy Saver mode, use

to select ENERGY SAVE ON or OFF. Press and hold ENTER for 3-5 seconds to exit SWITCH FUNCTION.

Press and hold ENTER again for 3-5 seconds to exit the engineering menu.

SYNCING CONSOLE WITH PASSPORT

1) Use the arrow keys on the Passport remote to scroll to the setup icon and press select.

2) Follow the on-screen prompts to press on the equipment console.

3) The message displayed on screen will notify you if the sync was a success or failure.

NOTE: See PASSPORT OWNER’S MANUAL for more information.

PASSPORT

™

MEDIA PLAYER

The Passport player, featuring Virtual Active

™

technology, is a high-

definition experience that uses real destination footage and matching

ambient sounds from stunning destinations around the world. The

ultimate in workout entertainment, Passport lets you escape the

confines of a regular workout routine while enjoying a dynamic

experience.

A Passport player is available for purchase separately from your

Horizon Fitness retailer. Additional courses are available from your

Horizon Fitness retailer.

For more information, go to: www.passportplayer.com

www.horizonfitness.com

HZ14_OG_Evolve_3_5_Rev1_2.indd 14-15 8/13/14 10:02 AM

Page is loading ...

NOTE: REMARQUE : NOTA:

If a question or problem arises

please see INFORMATION CARD

for contact information.

Si vous avez une question ou un

problème, veuillez vous reporter à

la FICHE DE RENSEIGNEMENTS

pour obtenir les coordonnées.

Si surge una pregunta o un

problema, consulte la TARJETA DE

INFORMACIÓN para obtener la

información de contacto.

Made in China | Fabriqué en Chine | Hecho en China

HZ14_OG_Evolve_3_5_Rev1_2.indd 44 8/13/14 10:03 AM

Horizon Fitness Evolve 5 User guide

This manual is also suitable for

Horizon Fitness Evolve 5 User guide

in other languages

Related papers

Other documents