Sony BDV-HZ970W User manual

Category
Soundbar speakers
Type
User manual

Sony BDV-HZ970W is a powerful home theater system that offers an immersive audio experience for movies, music, and games. It features a sleek design with front speakers that can be assembled using either long or short posts, depending on your preference. The system also includes a subwoofer for deep bass and surround speakers for a truly cinematic sound experience. With its multiple connectivity options, including HDMI and Bluetooth, you can easily connect your Blu-ray player, gaming console, or other devices to enjoy your favorite content.

Sony BDV-HZ970W is a powerful home theater system that offers an immersive audio experience for movies, music, and games. It features a sleek design with front speakers that can be assembled using either long or short posts, depending on your preference. The system also includes a subwoofer for deep bass and surround speakers for a truly cinematic sound experience. With its multiple connectivity options, including HDMI and Bluetooth, you can easily connect your Blu-ray player, gaming console, or other devices to enjoy your favorite content.

2
Thread the speaker cord () into the bottom of the post ( or ) and
out the opposite end.
You can choose either the long posts () or the short posts () to assemble the
speakers.
Screw holes
or
3
Thread the speaker cord () through the hole on the bottom of the
speaker () and out the hole on the rear.
4
Insert the post ( or ) into the hole on the bottom of the speaker
(), so that the screw on the top of the post faces the front of the
speaker.
Screw
or
5
Secure the post ( or ) with the screws ().
or
6
Connect the speaker cord (). Then, secure the speaker cord by running
it through the slit.
Connect the speaker cord with the colored tube to , and the speaker cord without the
colored tube to .
Colored
tube
Slit
Label
Note
Match the color of the tube and label.
Continued
Speaker Installation
Guide
4-187-308-11(1)
BDV-HZ970W
© 2010 Sony Corporation Printed in Malaysia
(1)
Assembling the front speakers
Required parts
×2 ×2 ×8
×2
Front speaker (R):
with red colored tube
Front speaker (L):
with white colored tube
×2×2
1
Thread the speaker cord () through the bottom hole in the base
().
Colored tube
7
Insert the post ( or ) so that the slot on the lower post aligns
with the projection of the base (), then secure the post with the
screws ().
or
Slot
Projection
Connecting the speaker cord to the center speaker and surround
speakers
Required parts
×2×3 ×1
Center speaker:
with green colored tube
Surround speaker (R):
with gray colored tube
Surround speaker (L):
with blue colored tube
Connect the speaker cord with the colored tube to , and the speaker
cord without the colored tube to .
Rear of the speaker
Connector
Colored tube
Note
Match the color of the tube and the label on the speaker. The label is located at the rear of the
speaker.
Connecting the speaker cord to the subwoofer
Required parts
×1
Subwoofer:
with purple colored tube
×1
1
Connect the speaker cord to the subwoofer.
Colored tube
Bottom of the subwoofer
2
Thread the speaker cord through the gap along the side of the
subwoofer, and secure it in the speaker cord holder.
  • Page 1 1
  • Page 2 2

Sony BDV-HZ970W User manual

Category
Soundbar speakers
Type
User manual

Sony BDV-HZ970W is a powerful home theater system that offers an immersive audio experience for movies, music, and games. It features a sleek design with front speakers that can be assembled using either long or short posts, depending on your preference. The system also includes a subwoofer for deep bass and surround speakers for a truly cinematic sound experience. With its multiple connectivity options, including HDMI and Bluetooth, you can easily connect your Blu-ray player, gaming console, or other devices to enjoy your favorite content.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI