GREEN TMR-234 User manual

Brand: GREEN

Model: TMR-234

Category: Electrical timers

Type: User manual

DIMENSIONS

Front view

Side View

MENUSET

GREEN

TMR - 234

RUN

RLY TIMER SET VALUE

TMR - 234

GREEN

GREEN MICROELECTRONICS INDIA PVT. LTD.

www.greenelectronics.in MADE IN INDIA

2 3 4 5 6

8 9 10 11 12

100 - 240V AC , 50/60 HZ

P N

14 15 16 17 18

NO C NC

RLY - 1A

RLY - 1B

START RESET

COM

GATE

Present Time Display Four digits, 0.4 Inch Red seven segment LED

User programming 4 Keys & Display

2 c / o

Output

Relay contact rating 5 A @ 230 VAC

(Resistive load) / 30 VDC

Power consumption 1.5 VA

Start , Reset , Gate External

Range

Timer direction Up / Down

Mounting Door mountable

Relay make Omron

Function On - Delay , Interval , Cyclic , Signal On Delay , Signal Off Delay,Start-Stop

Red LED

Flashing Red LED

SPECIFICATIONS

INSTRUCTION MANUAL

Supply voltage 100 - 240 VAC

Weight 160 grams

Dimension ( L x W x D ) 48 x 48 x 85

Mechanical life of relay

Electrical life of relay

Ambient temperature

Ambient humidity 35 to 85 % RH

Storage temperature

10 million operation

100,000 operation

-10 to 55 c

-25 to 65 c

Operating frequency 50 / 60 Hz

In the pack Timer, 2 Mounting Clamps and instruction manual

Relay ON

Timer running Indication

0.01 Second - 99.9 Hours

Indication

Set Time Display Four digits, 0.28 Inch Green seven segment LED

Memory Retention Selectable

Range Selection Program

GREEN MICROELECTRONICS INDIA PVT. LTD.

MANUFACTURER

[email protected] | | 0422-2590288www.greenelectronics.in

100 - 240V AC

50/60 HZ

RLY - 1A

COM

RLY - 1B

START

RESET

GATE

Thank you very much for purchasing this GREEN product

TMR - 234. Please read the instruction manual carefully for

the full usage of this product

The Timer has passed various quality tests before despatch.

Please check however, at the time of arrival, its model code

and its appearance and ensure that all the contents are provided

and there are no faults, damage etc, to the timer. Please also

ensure that the model code ,which is labeled on the timer,

is identical to the one you ordered.

1. Our company shall not be liable for any damages, as described

below, caused to both any users and third parties

a) Damages caused by the result of operation of the product.

b) Damages caused by any defects in the product which are

unpredictable for us.

2. The content in this manual are subject to change without any

notice. If you have any suggestion on the matter,

Please do not hesitate to contact us.

(4) Separate the input signal devices, input signal cables

and the product from the source

of noise or high - tension

cables producing noise

(5) The supplied power voltage and load must be within the

rated and specified ranges.

(6) Do not use where the water or oil splatter on the Timer

(7) Install a switch or circuit breaker that allows the operator

to immediately turn off the power

INTRODUCTION

NOTE

PRECAUTION FOR SAFE USE

(1) Use and store the Timer within the specified

ambient temperature and humidity ranges.

(2) Do not use the product in location subject to vibrations

or shocks. Using the product in such location over a long

period may result in damage due to stress.

(3) Do not use the product in locations subject to dust,

corrosive gases, or direct sunlight

START

WIRING DIAGRAM & I/O FUNCTIONS

TO START THE TIMER

RESET

GATE

RUN LED

RLY LED

RLY-1A,1B

TO STOP THE TIMER OR

TO PAUSE THE TIMER AT RUN CONDITON

LED FLASHES WHEN TIMER IN RUNNING

LED WILL ON WHEN RELAY TURNED ON

MAKES OUTPUT IN ACCORDANCE

WITH THE TIMER TYPE SETTING

LED WILL ON WHEN TIMER IN PAUSE

LED WILL OFF WHEN TIMER IN STOP

THE RELAY

AND MAINTAINED THE STATUS OF RELAY

TURN OFF

Multi - function Digital Timer

version 1.1

TMR-234

TMR-234 COMPONENTS FOR AUTOMATION

INITIAL SETTING

LOCK SETTING LOCK RANGE

RANGE SETING

PRESS FOR 2 SEC PRESS FOR 2 SEC

WHEN TIMER IN STOP CONDITION

SELECT THE TIMER TYPE USING KEYS

FIRST ON

TIME TIME

YES

FIRST OFF

ON-DELAY INTERVAL SIGNAL-ON

DELAY DELAY

SIGNAL-OFF START-STOP

CYCLIC

PRESS

FOR 3 SEC

IS SELECTED

IF YES

SELECT THE TIMER MODE

SELECT THE OFF-TIMER RANGE

SELECT THE MEMORY SELECTION

SELECT THE POWER-ON-START

SELECT THE FACTORY RESET

SELECT THE LOCK RANGE

SELECT THE OUTPUT TYPE

SELECT THE CYCLIC COUNT

IF IS SELECTED

KEYS

USING

KEYS

KEYSUSING

USING

KEYS

ELAPSED

TIME

REMAINING

TIME

MEMORY OFF

MEMORY ON

| |

SEE NOTE BEFORE INITIAL / SETVALUE SETTINGS

FOR CYCLIC TIMER TYPE

EXCEPT CYCLIC TIMER TYPE EXCEPT CYCLIC & START - STOP TIMER TYPES

FOR CYCLIC TIMER TYPE

PVPV PV

SVSV SV

SET

PRESS

PRESS &

RELAESE

PRESS

PRESS TO EXIT

PRESS

SECS

0.01 - 99.99

0.1 - 999.9

1 - 9999

1SEC -

1MIN -

99.9 MINS

99.9 HOURS

1 SEC TO 99.9 MINS

1 MIN TO 99.9 HOURS

SELECT THE TIME (SETVALUE)

SETVALUE BLINKS

S ETVALUE SAVED

I F PRESSED,

KEYSUSING

USING

ELSE AFTER BLINK

SELECT THE

SETVALUE SAVED

COUNT NO. SAVED

ON-TIME SETVALUE

OFF-TIME SETVALUE

CYCLIC COUNT NO.

IF PRESSED,

USING KEYS

ELSE AFTER BLINK

NOTE: INITIAL SETTING SETVALUE SETTING / ON-LINE-EDIT(OLE)

POWER-ON-START IS APPLICABLE FOR 1) 1)

IF CYCLIC COUNT IS SELECTED FOR TIMER TYPE,

TIMER TYPE ONLY.

TIMER STOPPED AFTER CYCLIC COUNT NO. IS REACHED.

CONSIDERED.

IF POWER-ON-START IS SELECTED, START SIGNAL IS NOT

TO SEE THE PRESENT COUNT, PRESS + KEYS FOR

IF FACTORY RESET IS SELECTED,DISPLAY SHOWS

FOR 2 SECS AND PARAMETERS OF INITAL SETTING,

2SECS. PRESENT COUNT DISPLAYS FOR 2 SECS.

RANGE SETTING AND SETVALUE SETTING ARE RESETED,

AND DISPLAY EXIT FROM INITIAL SETTING.

| |

PV SV

SETVALUE SELECTION IS APPLICABLE FOR THE TIMER TYPES,EXCEPT

PRESENT VALUE SET VALUE

FOR TIMER TYPE,SETVALUE DEPENDS THE RANGE SELECTION.

IF IS SELECTED FOR CYCLIC TIMER TYPE IS OPERATIONABLE.

FOR OLE :

IF TIMER MODE SELECTED

IF SV>=PV , SETVALUE LOAD AND SAVED IN MEMORY IMMEDIATELY.

(START-STOP) TIMER TYPE.

IF TIMER MODE SELECTED

IF SV>=PV (OR) SV<PV, SETVALUE LOAD AND SAVED IN MEMORY

IMMEDIATELY.

IF SV<PV , SETVALUE LOAD AND SAVED IN MEMORY FOR THE NEXT

START/RESET SIGNAL.

SETVALUE SETTING

On Time

Off Time

Count

UNLOCK

ONLY SET VALUE IS OPERATIONABLE

ONLY SET VALUE AND RANGE ARE

OPERATIONABLE

ALL ITEMS ARE NOT OPERATIONABLE

GREEN TMR-234 User manual

Brand: GREEN

Model: TMR-234

Category: Electrical timers

Type: User manual

Download PDF

report

GREEN TMR-234 User manual

GREEN TMR-234 User manual

Other documents