Stadler Form Eva Installation guide

Category
Humidifiers
Type
Installation guide

Stadler Form Eva is a humidifier that helps maintain optimal humidity levels in your home. It features an automatic mode with Adaptive Humidity™ technology for energy-efficient humidification, a warm mode for water preheating, and five output levels for customized comfort. The built-in hygrostat allows you to set your desired humidity level between 30% and 75%, or opt for continuous operation. Eva also has a night mode that dims the LEDs and display or turns them off completely, making it ideal for bedrooms.

Stadler Form Eva is a humidifier that helps maintain optimal humidity levels in your home. It features an automatic mode with Adaptive Humidity™ technology for energy-efficient humidification, a warm mode for water preheating, and five output levels for customized comfort. The built-in hygrostat allows you to set your desired humidity level between 30% and 75%, or opt for continuous operation. Eva also has a night mode that dims the LEDs and display or turns them off completely, making it ideal for bedrooms.

Setting up
1
1
5
OK!
2
SOAK CARTRIDGE
KARTUSCHE EINWEICHEN
TREMPER LA CARTOUCHE
6
2
green < 3° dH
red > 4° dH
red > 7° dH
red > 14° dH
red > 21° dH
4 5
Do not operate Ultrasonic
Humidifiers if water hardness
is 21° dH or more!
CHECK WATER HARDNESS
(WITH TESTING STRIP)
WASSERHÄRTE ERMITTELN
(MIT TESTSTREIFEN)
DÉTERMINER LA DURETÉ DE L'EAU
(AVEC LA BANDELETTE TEST)
2
1 sec
1
NOTE: Do not operate Eva
with decalcified water out
of a decalcification system
that uses the principle of an
ion exchanger (salt is added
to the water). The salt con-
tained in the water may lead
to white dust accumulation
around the appliance.
3
1 min
If your testing strip is missing, please contact us on
STADLERFORM.COM/CONTACT
5
3
2
POSITION & ACTIVATE
REMOTE SENSOR
REMOTE SENSOR
POSITIONIEREN
UND AKTIVIEREN
POSITIONNER ET ACTIVER LE
REMOTE SENSOR
1
6*
3 – 5 m optimal
distance
(max. 10 m)
Operation
OPERATION
BEDIENUNG
MANIPULATION
AUTO MODE
with Adaptive
Humidity
TM
(automatic and
energy-ecient)
WARM MODE
Water pre-
heating (for a
high output)
OUTPUT LEVELS
1 – 5 levels
(from powerful
to very quiet)
5
Operation
HYGROSTAT
Desired humidity
30 – 75 % or
continuous
ON / OFF
Switch
On / O
NIGHT MODE
Dims LEDs
and display or
turns them o
(3 modes)
Cleaning
DECALCIFICATION
ENTKALKUNG
DÉCALCIFICATION
2
15 min
1
Switch
OFF
13
5 min
6
14
Hot
11
12
Press 5 sec
NIGHT MODE
23 24
Clean once a month
Einmal pro Monat reinigen
Nettoyer une fois par mois
Mt
STADLER FORM OF SWITZERLAND
Chamerstrasse 174, 6300 Zug, Switzerland, Phone +41 41 720 48 48
www.stadlerform.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Stadler Form Eva Installation guide

Category
Humidifiers
Type
Installation guide

Stadler Form Eva is a humidifier that helps maintain optimal humidity levels in your home. It features an automatic mode with Adaptive Humidity™ technology for energy-efficient humidification, a warm mode for water preheating, and five output levels for customized comfort. The built-in hygrostat allows you to set your desired humidity level between 30% and 75%, or opt for continuous operation. Eva also has a night mode that dims the LEDs and display or turns them off completely, making it ideal for bedrooms.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI