Eva

Stadler Form Eva Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Stadler Form Eva Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Setting up
1
1
5
OK!
2
SOAK CARTRIDGE
KARTUSCHE EINWEICHEN
TREMPER LA CARTOUCHE
6
2
green < 3° dH
red > 4° dH
red > 7° dH
red > 14° dH
red > 21° dH
4 5
Do not operate Ultrasonic
Humidifiers if water hardness
is 21° dH or more!
CHECK WATER HARDNESS
(WITH TESTING STRIP)
WASSERHÄRTE ERMITTELN
(MIT TESTSTREIFEN)
DÉTERMINER LA DURETÉ DE L'EAU
(AVEC LA BANDELETTE TEST)
2
1 sec
1
NOTE: Do not operate Eva
with decalcified water out
of a decalcification system
that uses the principle of an
ion exchanger (salt is added
to the water). The salt con-
tained in the water may lead
to white dust accumulation
around the appliance.
3
1 min
If your testing strip is missing, please contact us on
STADLERFORM.COM/CONTACT
5
3
2
POSITION & ACTIVATE
REMOTE SENSOR
REMOTE SENSOR
POSITIONIEREN
UND AKTIVIEREN
POSITIONNER ET ACTIVER LE
REMOTE SENSOR
1
6*
3 – 5 m optimal
distance
(max. 10 m)
Operation
OPERATION
BEDIENUNG
MANIPULATION
AUTO MODE
with Adaptive
Humidity
TM
(automatic and
energy-ecient)
WARM MODE
Water pre-
heating (for a
high output)
OUTPUT LEVELS
1 – 5 levels
(from powerful
to very quiet)
5
Operation
HYGROSTAT
Desired humidity
30 – 75 % or
continuous
ON / OFF
Switch
On / O
NIGHT MODE
Dims LEDs
and display or
turns them o
(3 modes)
Cleaning
DECALCIFICATION
ENTKALKUNG
DÉCALCIFICATION
2
15 min
1
Switch
OFF
13
5 min
6
14
Hot
11
12
Press 5 sec
NIGHT MODE
23 24
Clean once a month
Einmal pro Monat reinigen
Nettoyer une fois par mois
Mt
STADLER FORM OF SWITZERLAND
Chamerstrasse 174, 6300 Zug, Switzerland, Phone +41 41 720 48 48
www.stadlerform.com
/