Wet Sounds STEALTH AS-6 FAQ

Brand: Wet Sounds

Model: STEALTH AS-6

Type: FAQ

STEALTH AS-6/AS-10

Active Subwoofer Enclosures

STEALTH AS-6 STEALTH AS-10

 Rotationally Molded Polyethylene Housing – tough enough to withstand harsh environments

 High Efficiency Class D Amp – sealed against moisture and dirt

 Easy Plug & Play connection with STEALTH Sound Bars, or any other system

 High Excursion subwoofer driver – computer matched to the enclosure

 Remote level control included

 Stainless steel mounting hardware included. Adjustable mounting feet on the AS-6.

 Durable aluminum grill to match the STEALTH Sound Bars

 Auto or manual turn-on function

 Thermal & over/under voltage protection

STEALTH Subwoofer Specifications STEALTH AS-6 STEALTH AS-10

Amplifier Power @ < 0.2% THD 250 Watts 500 Watts

Frequency Response 20Hz – 250Hz

Battery Voltage Range 10.5 – 16 VDC

Variable Low Pass Crossover 50 Hz – 200 Hz

Variable Bass Boost 0-12dB @ 45 Hz

Dimensions 8.75” w x 8.5” h x 9.25” d 14.75” w x 12.75” h x 11.5” d

Weight 16.6 Lbs 22.4 Lbs

Dealer Price $269.99 $349.99

Availability Late September 2016

FAQs on the STEALTH AS-6 & AS-10 Active Subwoofer Enclosures

What are the differences between the STEALTH AS-10 & our previous HT-AS10?

1. Rotationally Molded Polyethylene Housing, instead of fiberglass. Although the footprint

of the two are identical, the molded housing is stronger, lighter, and more durable than

the fiberglass.

2. Harness to connect instead of terminals on the amp. This improves the water resistance

& simplifies connection to a Wet Sounds Sound Bar.

3. New AL Mesh grill – stronger, plus they match the sound bars.

Why are amplifier specifications different on the AS-10 & AS-6? The amps look similar.

The amp on both units is identical. We adjust the output of the amp by carefully matching the

impedance of the subs. The AS-10 requires more power, so the impedance of the sub is

lowered to result in 500 watts of output power from the amp. The AS-6 requires less power, so

the impedance of the sub is raised to result in 250 watts of power from the amp.

How will I adjust the controls on the amplifier?

The controls are behind a clear plastic panel with a rubber gasket to keep water, mud and dust

away. Once the sub is installed & the levels are set, the only adjustment needed will be the

included remote level control to fine tune the output of the sub. This control is

interchangeable with AS-6, AS-10 & even the HT-AS10.

How easy is this to install with my Wet Sounds Sound Bar?

AS-6 & AS10 have been designed with the correct connections to be “plug & play” with our

sound bars. The Remote Turn On Wire connects to the remote out on newer sound bars, but if

a user has an older sound bar the sub has auto sensing as well to turn on automatically. The

installation is incredibly easy if a user has a Wet Sounds sound bar, but will work perfectly with

another brand as well.

How do the adjustable feet on the AS-6 work?

Each can be rotated 90 degrees, which allows each corner to have the mounting foot either

come out from the front of the housing or the side of the housing.

Can I improve the performance of the AS-6/10 by using a different woofer or amplifier?

No. The components used in the STEALTH AS-6/10 subwoofers are designed for maximum

performance as complete unit. Substitution of any other amplifier or subwoofer driver is not

recommended as it will degrade the performance and void the warranty.

Where is the best place to mount my subwoofer?

The physics of sound tell us that any subwoofer increases its output when allowed to “load”

into a wall, corner, or some other structure. Since every vehicle & application is different, we

suggest you experiment & move the subwoofer around to find the optimal position.

How are they packaged?

The AS6/10 come in all new full color gift box packaging designed to have a “family”

resemblance with our latest STEALTH Sound Bar packages. When placed on a showroom floor

or a dealership parts display, these will help the product sell themselves.

When will these subs be available?

Both models are scheduled to be in the warehouse by September 21, 2016. We have ample

inventory arriving & re-orders have already been placed. Sell all you want – we’re making

more!

Wet Sounds STEALTH AS-6 FAQ

Wet Sounds STEALTH AS-6 FAQ

Wet Sounds STEALTH AS-6 FAQ

Related papers

Other documents