Panasonic SCBTT880EB Owner's manual

Brand: Panasonic

Model: SCBTT880EB

Category: Home cinema systems

Type: Owner's manual

This manual is also suitable for

SC-BTT880

VQT4Z42

until

2013/05/03

Operating Instructions

Blu-ray Disc

Home Theater Sound System

Model No. SC-BTT880

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Model number suffix “EB” denotes UK model.

Firmware updates

Panasonic is constantly improving the unit’s firmware to ensure that our

customers are enjoying the latest technology.

Panasonic recommends updating your firmware as soon as you are

notified.

For details, refer to “Firmware updates” (> 19) or

http://panasonic.jp/support/global/cs/ (This site is in English only.)

SC-BTT880EB-VQT4Z42_mst.book 1 ページ２０１３年３月２１日　木曜日　午前９時４９分

VQT4Z42

Precautions

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing.

≥

Do not place objects filled with liquids, such as vases, on this unit.

≥ Use only the recommended accessories.

≥ Do not remove covers.

≥ Do not repair this unit by yourself. Refer servicing to qualified

service personnel.

≥ Do not let metal objects fall inside this unit.

≥ Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

≥ Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

≥ Insert the mains plug fully into the socket outlet.

≥ Do not pull, bend, or place heavy items on the lead.

≥ Do not handle the plug with wet hands.

≥ Hold onto the mains plug body when disconnecting the plug.

≥ Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the

socket outlet immediately.

Small object

≥

Keep the Memory Card out of reach of children to prevent

swallowing.

≥ Keep the screws out of reach of children to prevent swallowing.

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein

may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles,

on this unit.

≥ This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile

telephone.

≥ This unit is intended for use in moderate climates.

≥ For wireless system

Product Identification Marking is located on the bottom of the

wireless system.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in cabinet or

in another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

≥ Do not expose this unit to direct sunlight, high temperatures,

high humidity, and excessive vibration.

Speaker

≥

Use only supplied speakers

The main unit and supplied speakers are to be used only as

indicated in these operating instructions. Failure to do so may lead

to damage to the amplifier and/or the speakers, and may result in

the risk of fire. Consult a qualified service person if damage has

occurred or if you experience a sudden change in performance.

≥ Be careful not to cross (short-circuit) or reverse the polarity of

the speaker wires as doing so may damage the speakers.

≥ Hold the speaker firmly to avoid injury by dropping the speaker

when carrying.

≥ You can damage your speakers and shorten their useful life if

you play sound at high levels over extended periods.

≥ Do not touch the front area of the speakers. Hold by the sides.

≥ Place speakers on flat, secure surfaces.

≥ To avoid injury by falling or dropping the speaker, place the

speaker cables with care not to stumble or hook.

≥

Do not stand on the speaker. Be cautious when children are near.

Batteries

Mishandling of batteries can cause electrolyte leakage and may

cause a fire.

≥ Danger of explosion if battery is incorrectly replaced. Replace

only with the type recommended by the manufacturer.

≥ When disposing the batteries, please contact your local

authorities or dealer and ask for the correct method of disposal.

≥

Do not mix old and new batteries or different types at the same time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in a car exposed to direct sunlight

for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for

a long period of time. Store in a cool, dark place.

The following limits are in place regarding the usage of this unit.

You must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental damage

which may arise due to a failure to obey these limits, or to any

condition of use or disuse of this unit.

≥ Data transmitted and received over radio waves may be

intercepted and monitored.

≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and

follow the following points:

– Do not expose this unit to high temperatures or direct

sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

This product is intended for general consumer. (Category 3)

This product shall exclusively be used inside buildings.

WARNING

CAUTION

Wireless LAN connection

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this product is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to our

R&TTE products from our DoC server:

http://www.doc.panasonic.de

Contact to Authorized Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Germany

This product is intended to be used in the following countries:

AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU,

HR, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI,

SK, TR

(SA-BTT880) (SH-FX71/RFAX1012)

SC-BTT880EB-VQT4Z42_mst.book 2 ページ２０１３年３月２１日　木曜日　午前９時４９分

VQT4Z42

The unit may keep the user settings information in the unit. If you

discard this unit either by disposal or transfer, then follow the

procedure to return all the settings to the factory presets to delete the

user settings. (

43, "To return all settings to the factory preset.")

≥

The operation history may be recorded in the memory of this unit.

Information for Users on Collection and

Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or

accompanying documents mean that used electrical

and electronic products and batteries should not be

mixed with general household waste.

For proper treatment, recovery and recycling of

old products and used batteries, please take them

to applicable collection points, in accordance with

your national legislation and the Directives 2002/

96/EC and 2006/66/EC.

By disposing of these products and batteries

correctly, you will help to save valuable resources

and prevent any potential negative effects on

human health and the environment which could

otherwise arise from inappropriate waste handling.

For more information about collection and recycling

of old products and batteries, please contact your

local municipality, your waste disposal service or the

point of sale where you purchased the items.

Penalties may be applicable for incorrect disposal of

this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic

equipment, please contact your dealer or supplier

for further information.

[Information on Disposal in other Countries

outside the European Union]

These symbols are only valid in the European

Union. If you wish to discard these items, please

contact your local authorities or dealer and ask for

the correct method of disposal.

Note for the battery symbol (bottom two

symbol examples):

This symbol might be used in combination with a chemical

symbol. In this case it complies with the requirement set

by the Directive for the chemical involved.

This unit adopts the following technology for copyright protection.

Cinavia Notice

This product uses Cinavia technology to limit the use of unauthorized

copies of some commercially-produced film and videos and their

soundtracks. When a prohibited use of an unauthorized copy is

detected, a message will be displayed and playback or copying will be

interrupted.

More information about Cinavia technology is provided at the Cinavia

Online Consumer Information Center at http://www.cinavia.com. To

request additional information about Cinavia by mail, send a postcard

with your mailing address to:

Cinavia Consumer Information Center, P.O. Box 86851, San Diego,

CA, 92138, USA.

Caution for AC Mains

Lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for

your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the

replacement fuse has a rating of 5-ampere and that it is approved

by ASTA or BSI to BS1362.

Check for the ASTA mark

or the BSI mark

on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it

is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a

replacement cover is obtained.

A replacement fuse cover can be purchased from your local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains

plug (figures A and B). Confirm the AC mains plug fitted and follow

the instructions below.

Illustrations may differ from actual AC mains plug.

1 Open the fuse cover with a screwdriver.

2 Replace the fuse and close or attach the fuse cover.

To dispose or transfer this unit

Restriction on use of

unauthorized copied content

Fuse cover

Figure A Figure B

Fuse

(5 ampere)

Fuse

(5 ampere)

SC-BTT880EB-VQT4Z42_mst.book 3 ページ２０１３年３月２１日　木曜日　午前９時４９分

VQT4Z42

Table of contents

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Caution for AC Mains Lead. . . . . . . . . . . . . . . 3

Getting started

Package contents and accessories . . . . . . . . 5

Unit and media care . . . . . . . . . . . . . . . . . . . . 6

Playable media . . . . . . . . . . . . . . . . . . . . . . . . 7

Control reference guide . . . . . . . . . . . . . . . . . 9

STEP 1: Positioning . . . . . . . . . . . . . . . . . . . 11

STEP 2: Preparing the speakers . . . . . . . . . 12

STEP 3: Connections . . . . . . . . . . . . . . . . . . 13

STEP 4: Connecting the AC mains lead . . . . 17

STEP 5: Preparing the wireless system . . . . 17

STEP 6: Settings. . . . . . . . . . . . . . . . . . . . . . 18

Inserting or removing media . . . . . . . . . . . . . 20

Enjoying TV with unit’s speakers . . . . . . . . . 20

HOME menu . . . . . . . . . . . . . . . . . . . . . . . . . 21

Multi User Mode . . . . . . . . . . . . . . . . . . . . . . 22

Playback

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using the iPod/iPhone . . . . . . . . . . . . . . . . . 25

TV & Radio

VIERA Link “HDAVI Control™” . . . . . . . . . . . 27

•Enjoying TV and STB with unit’s speakers . . . . . .28

Listening to the Radio . . . . . . . . . . . . . . . . . . 29

Advanced operations

VIERA Connect

(Enjoying Internet Service) . . . . . . . . . . . . . . 30

Home Network feature . . . . . . . . . . . . . . . . . 31

Option menu . . . . . . . . . . . . . . . . . . . . . . . . . 32

Setup menu. . . . . . . . . . . . . . . . . . . . . . . . . . 35

•Speaker settings . . . . . . . . . . . . . . . . . . . . . . . . . .40

Changing the sound settings . . . . . . . . . . . . 41

Speaker installation option . . . . . . . . . . . . . . 41

Reference

Troubleshooting guide . . . . . . . . . . . . . . . . . 43

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Specifications . . . . . . . . . . . . . . . . . . . . . . . . 48

SC-BTT880EB-VQT4Z42_mst.book 4 ページ２０１３年３月２１日　木曜日　午前９時４９分

Getting startedPlaybackTV & RadioAdvanced operationsReference

VQT4Z42

Getting start ed

Package contents and accessories

Check the package contents and supplied accessories before using this unit.

∫Parts number

Package contents

(SA-BTT880)

SUBWOOFER

FRONT

CENTER

SURROUND

(SB-HF5600) (SB-HS8800) (SB-HC5600)

(SB-HW490)

(SH-FX71)

(Stands)

(Speakers)

(Bases)

(Screws)

Main unit

(Speaker cable)

Wireless system

Parts Parts number

Stands (with cables)

RYP1868A-S: RED

RYP1868-S: WHITE

RYP1871A-S: GREY

RYP1871-S: BLUE

Bases RYP1869-S

Screws XYN5iF14FJK

Speaker cable REEX1268: GREEN

SC-BTT880EB-VQT4Z42_mst.book 5 ページ２０１３年３月２１日　木曜日　午前９時４９分

VQT4Z42

∏ 1 Remote control

(N2QAYB000728)

∏ 2 Batteries for remote control

∏ 2 AC mains leads

(with a ferrite core: RFA3520)

(without a ferrite core: K2CT2YY00097)

∏ 1 FM indoor antenna

(RSAX0002)

∏ 1 Digital transmitter

(RFAX1012)

∏ 1 Sheet of speaker cable sticker



≥ Product numbers provided in these operating instructions

correct as of March 2013. These may be subject to

change.

≥ Do not use AC mains lead with other equipment.

≥ Please note that the actual controls and components,

menu items, etc. may look somewhat different from those

shown in the illustrations in these Operating Instructions.

Unit and media care

∫ Clean this unit with a soft, dry

cloth

≥ Never use alcohol, paint thinner or benzine to

clean this unit.

≥ Before using chemically treated cloth, carefully

read the instructions that came with the cloth.

∫ This unit’s lens

∫ Clean discs

Wipe with a damp cloth and then wipe dry.

∫ Disc and card handling

precautions

≥ Handle discs by the edges to avoid inadvertent

scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use disc cleaning sprays, benzine,

thinner, static electricity prevention liquids or

any other solvent.

≥ Clean any dust, water, or foreign matter from

the terminals on the rear side of the card.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed

stickers or labels (rented discs etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart

shapes.

Accessories

Lens cleaner: RP-CL720AE

≥ This lens cleaner may not be available for

sale in all countries, e.g. not available in

Germany, please consult your Panasonic

dealer for advice.

≥ This lens cleaner is sold as specific for DIGA,

but can be used on this unit as well.

DO DO NOT

SC-BTT880EB-VQT4Z42_mst.book 6 ページ２０１３年３月２１日　木曜日　午前９時４９分

Getting started

VQT4Z42

Playable media

≥ See pages 8 and 49 for more information on the types of content that can be played.

Device Disc markings Device types Contents format

BD-Video Video

BD-RE Video, JPEG, MPO

BD-R Video, MKV, Xvid

DVD-Video Video

DVD-R

Video, AVCHD, MKV,

Xvid, JPEG, MPO,

FLAC, MP3, WAV

DVD-R DL

DVD-RW

Video, AVCHD

—

+R/+RW/+R DL

Music CD Music [CD-DA]

—

CD-R

CD-RW

MKV, Xvid, JPEG,

MPO, FLAC, MP3,

Music [CD-DA], WAV

SD Memory Card (from 8 MB to 2 GB)

SDHC Memory Card (from 4 GB to 32 GB)

SDXC Memory Card (48 GB, 64 GB)

(Compatible with both mini and micro types)

AVCHD, AVCHD 3D,

MP4, MPEG2, JPEG,

MPO

—

USB devices

(up to 2 TB)

MKV, MP4, MPEG2,

Xvid, JPEG, MPO,

FLAC, MP3, WAV

DVD

USB

SC-BTT880EB-VQT4Z42_mst.book 7 ページ２０１３年３月２１日　木曜日　午前９時４９分

VQT4Z42

∫ Discs that cannot be played by

this unit

≥ DVD-RAM

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

≥ Video CD and Super Video CD

≥ WMA discs

≥ DivX discs

≥ HD DVD

∫ Region management information

BD-Video

This unit can play BD-Video discs supporting the

region code “B”.

Example:

DVD-Video

This unit can play DVD-Video discs supporting

the region number “2” or “ALL”.

Example:

∫ Finalize

DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW

recorded by a recorder, etc. needs to be finalized

by the recorder to play on this unit. Please refer to

the recorder’s instructions.

∫ BD-Video

This unit supports high bit rate audio (Dolby

Digital Plus, Dolby

TrueHD, DTS-HD High

Resolution Audio and DTS-HD Master Audio)

adopted in BD-Video.

∫ 3D

≥ 3D videos and 3D still pictures can be played

back when this unit is connected to a 3D

compatible TV using a High Speed HDMI

Cable.

≥ 2D video can be enjoyed as 3D virtually. (> 34)

∫ Music CD

Operation and sound quality of CDs that do not

conform to CD-DA specifications (copy control

CDs, etc.) cannot be guaranteed.

∫ SD card

≥ miniSD Cards, microSD Cards,

microSDHC Cards and microSDXC

Cards can be used, but must be used

with an adaptor card. These are

usually supplied with such cards, or

otherwise customer provided.

≥ To protect the card’s contents, move

the record prevention tab (on the SD card) to

“LOCK”.

≥ This unit is compatible with SD Memory Cards

that meet SD Card Specifications FAT12 and

FAT16 formats, as well as SDHC Memory

Cards in FAT32 format and SDXC Memory

Cards in exFAT.

≥ If the SD card is used with incompatible

computers or devices, recorded contents may

be erased due to the card being formatted etc.

≥ Usable memory may be slightly less than the

card capacity.

∫ USB device

≥ This unit does not guarantee connection with all

USB devices.

≥ This unit does not support USB device

charging.

≥ FAT12, FAT16, FAT32, and NTFS file systems

are supported.

≥ This unit supports USB2.0 High Speed.

≥ This unit can support an HDD formatted to

FAT32 and NTFS.

Some types of HDD may require the use of its

external power supply unit.

∫ BD-RE, BD-R

Discs recorded in DR mode using Panasonic

Blu-ray Disc recorders may not play back the

audio etc., correctly.



≥ It may not be possible to play the above media in some

cases due to the type of media, the condition of the

recording, the recording method, and how the files were

created.

≥ The producers of the disc can control how discs are

played, so you may not always be able to control play as

described in these operating instructions. Read the disc’s

instructions carefully.

ALL

SC-BTT880EB-VQT4Z42_mst.book 8 ページ２０１３年３月２１日　木曜日　午前９時４９分

Getting started

VQT4Z42

Control reference guide

∫ Using the remote control

Insert so the poles (i and j) match those in the

remote control.

Point it at the remote control signal sensor on this

unit. (> 10)

1 Turn the unit on and off

2 Select title numbers, etc./Enter numbers or

characters

[CANCEL]: Cancel

3 Select the source

4 Basic playback control buttons (> 23)

5 Select preset radio stations (> 29)

6 Show status messages (> 24)

7 Show the Home screen of the VIERA

Connect (> 30)

] : Move the highlight for selection

[OK] : Confirm the selection

(

)(

) : Frame-by-frame (

23)

9 Show OPTION menu (> 32)

10 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the

display

11 Set the sound mode (> 41)

12 Select surround sound effects (> 41)/Set the

sleep timer

1 Press and hold [jSLEEP].

2 While “SLEEP ££” is displayed, press

[jSLEEP] several times to select the

time (in minutes).

≥ Timer selection is up to 120 minutes.

≥ Select “OFF” when cancelling the setting.

≥ To confirm the remaining time

Press and hold the button again.

13 TV operation buttons

[Í TV]: Turn the television on and off

[AV, INPUT]: Switch the input select

[ijVOL] : Adjust the volume

14 Adjust the volume of the main unit

15 Select audio (> 23)

16 Mute the sound

≥ “MUTE” flashes on the unit’s display, while

the function is on.

≥ To cancel, press the button again or adjust

the volume.

≥ Muting is cancelled if the unit is turned off.

17 Show NETFLIX screen (> 30)

18 Select radio stations manually (> 29)

19 Exit the menu screen

20 Show HOME menu (> 21)

21 Show Pop-up Menu/Top Menu (> 24)

22 Return to previous screen

23 Start up a video communication (> 30)

24 Select speaker channel (> 41)

Remote control

ラ

ヰ

ヮ

ユ

モヷ

ンユヵヶンワ

ヴレリヱ

ヱロモヺ

ヱモヶヴユ

ヴヵヰヱ

ヴユモンヤラヴユモンヤラ

ヴロヰヸ

ヴレリヱ

リワヱヶヵ

ユヹリヵ

ㄊヱㄐㄅ

ュリヴヤ

ヱ

ヰ

ヱ

ノ

ヶ

ヱ

チ

ヮ

ユ

ワ

ヶ

リ

ワ

ヵ

ユ

ン

ワ

ユ

ヵ

ヰ

ヱ

チ

ヮ

ユ

ワ

ヶ

モヶュリヰ



R6/LR6, AA



(Alkaline or manganese

batteries)

SC-BTT880EB-VQT4Z42_mst.book 9 ページ２０１３年３月２１日　木曜日　午前９時４９分

VQT4Z42

1 Standby/on switch (Í/I) (> 18)

Press to switch the unit from on to standby

mode or vice versa. In standby mode, the unit

is still consuming a small amount of power.

2 Open or close the disc tray (> 20)

3 Adjust the volume of the main unit

4 Disc tray

5Stop (> 23)

6 Start play (> 23)

7 SD card slot (> 20)

8 USB port (> 20, 26)

9 Remote control signal sensor

Distance: within approx. 7 m.

Angle: Approx. 20

up and down, 30

left and right

10 Display

11 Dock for iPod/iPhone (> 26)

1 AC IN terminal (> 17)

2 Speaker terminals (> 13)

3 Cooling fan

4 LAN port (> 16)

5 USB port (> 30)

6 HDMI AV OUT (ARC) terminal (> 14, 15)

7 HDMI1 IN (CABLE/SAT) terminal (> 15)

8 HDMI2 IN terminal (> 15)

9 DIGITAL AUDIO IN terminal (> 14, 15)

10 FM radio antenna terminal (> 15)

11 AUX terminal (> 14)

12 Digital transmitter dock for wireless system

Main unit (Front)

SD CARD

457611910

123

Main unit (Rear)

1 2 3 4 5 6 7 12118 9 10

SC-BTT880EB-VQT4Z42_mst.book 10 ページ２０１３年３月２１日　木曜日　午前９時４９分

Getting started

VQT4Z42

STEP 1: Positioning

For optimum position

Place the front, centre and surround speakers at approximately the same distance from the seating

position.

≥ Adjust the volume using the Delay time function if the distance between each speaker and the

seating position is not equal. (> 40)

A Centre speaker

≥

Put on a rack or shelf not to interfere with the

TV’s various sensors (ambient light, etc.).

Vibration caused by the speaker can disrupt

the picture if it is placed directly on the TV.

B Front speakers

C Subwoofer

D Surround speakers

≥ Place the speakers at the same height or

higher than ear level.

E Wireless system

≥ To avoid interference, separate the wireless

system from the other electronic devices

that use the same radio frequency (2.4 GHz

band).



≥ Place the wireless system within approximately 10 m from the main unit.

≥ To allow for proper ventilation and to maintain good airflow around the wireless system, position it with at least 5 cm of space

on all sides.

≥ Do not use the wireless system or the digital transmitter in a metal cabinet or bookshelf.

≥ Keep your speakers at least 10 mm away from the system to avoid noise generated by resonance.

≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick

curtains.

≥ For optional wall mount, refer to page 41.

∫ Upgrade to 7.1-channel system

The main unit is designed to enjoy the 7.1ch surround sound. A more theatre-like effect is possible with

a wireless connection.

Necessary equipment:

≥ Wireless system (SH-FX71)

1 optional system

≥ 2 additional speakers [Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]



≥ For more details, refer to the operating instructions for SH-FX71.

≥ The WIRELESS LINK indicator lights green when this unit and SH-FX71 are connected wirelessly. You can also check the

link status if you press and hold the [SOUND] of this unit. When WIRELESS LINK is turned on, the main unit's display shows

the message, “WIRELESS SPEAKERS LINKED”.











120°

60°

Wireless LAN

Cordless phone

Wireless

system

SC-BTT880EB-VQT4Z42_mst.book 11 ページ２０１３年３月２１日　木曜日　午前９時４９分

VQT4Z42

STEP 2: Preparing the speakers

Front speakers, Surround speakers

1 Attach the stand to the base.

2 Tighten the 3 screws (supplied) securely.

3 Slide the speaker cable into the groove.

4 Attach the speaker.

5 Tighten the screw (supplied) securely.

≥ After connecting the speaker cable (> 13),

press the cable into the groove.



≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.

Assembling the speakers

Thread the speaker

cable through the

base.





Groove

SC-BTT880EB-VQT4Z42_mst.book 12 ページ２０１３年３月２１日　木曜日　午前９時４９分

Getting started

VQT4Z42

Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers.

e.g., Centre speaker

STEP 3: Connections

Turn off all equipment before connection and read the appropriate operating instructions.

Do not connect the AC mains lead until all other connections are complete.

Connect the speaker cables to the terminals of the same colour.

Connecting the speaker cables



CENTER

Push

r: White

s: Blue line

Speaker cable sticker (supplied)

Connector

Speaker indication

Speaker cable sticker Connector

1 FRONT Lch 1 White

2 FRONT Rch 2 Red

3 SURROUND Lch 3 Blue

4 SURROUND Rch 4 Grey

5 CENTER 5 Green

6 SUBWOOFER 6 Purple

Speaker connection

LS / RB LB / RS

SPEAKERS

ENCEINTES

SURROUND (3 - 6

)

AMBIOPHONIQUES

SURR

SIDE

Wireless system

Surround selector

Set in the centre position.

SC-BTT880EB-VQT4Z42_mst.book 13 ページ２０１３年３月２１日　木曜日　午前９時４９分

VQT4Z42

∫ HDMI

≥ Use the ARC compatible High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.

It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use

HDMI cables 5.0 meters or less.

≥

Audio will be output through the system’s speakers when “Off” is selected in “HDMI Audio Output”. (

36)

∫ TV Audio

≥ To output TV audio from this unit's speakers, you need to switch the selector. (> 20)

∫ OPTICAL IN

≥ After making the digital audio connection, make settings to suit the type of audio from your digital

equipment. (> 36)

If the HDMI terminal on the TV is labelled “HDMI (ARC)”, the connection of the optical digital audio cable is not required.

It is also possible to use an audio cable instead of the optical digital audio cable. In this case, connect the AUX terminal on

the main unit with the audio output terminal on the TV.

Connecting to a TV

What is ARC?

ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. This feature allows a home

theatre system to receive and play audio from the TV through a single HDMI cable without additional wiring.

OPTICAL

OUT

AUDIO OUT

AV I N

HDMI cable (not supplied)

Optical digital audio cable*

(not supplied)

Audio cable*

(not supplied)

SC-BTT880EB-VQT4Z42_mst.book 14 ページ２０１３年３月２１日　木曜日　午前９時４９分

Getting started

VQT4Z42



≥ Use an FM outdoor antenna if radio reception is poor.

∫ When the connecting devices have an HDMI terminal



HDMI standby pass-through

Even if this system is in standby mode, the audio and/or video signal from the device connected to the HDMI1 IN (CABLE/SAT)

or HDMI2 IN terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this

system). Even while the unit is in the standby mode, you can change the input signal HDMI1 IN (CABLE/SAT) or HDMI2 IN by

pressing [EXT-IN] on the remote control.

∫ When the connecting devices do not have an HDMI terminal

FM antenna connection

Affix this end of the antenna to a wall or pillar where

the reception is best.

FM indoor antenna (supplied)

Other device connection

AV IN

(ARC)

AV O U T

e.g.,

Set Top Box, etc.

Video game, etc.

HDMI cable

(not supplied)

HDMI cable

(not supplied)

OPTICAL

OUT

e.g.,

Optical digital audio cable

(not supplied)

Set Top Box, etc.

SC-BTT880EB-VQT4Z42_mst.book 15 ページ２０１３年３月２１日　木曜日　午前９時４９分

VQT4Z42

The following services can be used when this unit is connected to broadband.

≥ Firmware can be updated (> 19)

≥ You can enjoy BD-Live (> 24)

≥ You can enjoy VIERA Connect (> 30)

≥ You can access other devices (Home Network)

(> 31)

≥ This unit supports Wi-Fi Direct

and can make

a wireless connection to wireless devices

without router. You can use this function when

enjoying Home Network feature, etc. Internet

access is not available while connected via

Wi-Fi Direct

. (> 31, 37)

For details about connection method, refer to the instructions supplied with the connected equipment.

This unit has built in Wi-Fi

and can be connected to a wireless router.

≥ For up-to-date compatibility information on your wireless router, refer to

http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ The unit is not compatible with public wireless LAN services (Hotspot etc.) provided in airports,

stations, cafes, etc.

≥ See page 2 for the precautions of wireless LAN connection.

≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.

≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.

Digital transmitter connection

Connecting to the network

Insert fully until

you hear a click.

Do not insert or remove while the

home theatre unit is on.

Make sure that the digital transmitter is fully inserted.

If the digital transmitter is not fully inserted, the sound

may not be available from the surround speakers.

DO NOT

Wireless LAN connection

Wireless router, etc.

Internet

LAN cable connection

LAN Cable (not supplied)

Internet

Broadband router, etc.

SC-BTT880EB-VQT4Z42_mst.book 16 ページ２０１３年３月２１日　木曜日　午前９時４９分

Getting started

VQT4Z42

STEP 4: Connecting the AC mains lead

Connect only after all other connections are complete.

≥ The wireless system and the main unit consume a small amount of AC power (> 48, 49) even when

turned off. For the purpose of power conservation, the unit can be disconnected if you will not be

using it for extended period of time.

STEP 5: Preparing the wireless system

Turn on the wireless system after all connections are complete.

AC IN

AC mains lead (supplied)

To a household mains socket

AC mains lead (supplied)

To a household mains socket

The cord with a ferrite core is for

the wireless system.

Wireless system

WIRELESS LINK

Wireless

system

Press [C I, BÍ] on the wireless system.

C I: The wireless system is on.

BÍ: The wireless system is off.

The wireless system consumes a small amount of power, even when it is off.

WIRELESS LINK indicator

Red

: The wireless system is on and the wireless link is deactivated.

Green

: The wireless system is on and the wireless link is activated.

SC-BTT880EB-VQT4Z42_mst.book 17 ページ２０１３年３月２１日　木曜日　午前９時４９分

VQT4Z42

STEP 6: Settings

After connecting your new home theatre for the

first time and pressing [Í], a screen for the basic

settings will appear.

Preparation

Turn on the television and select the

appropriate video input on the television.

≥

Confirm the digital transmitter connection. (

16)

1 Press [Í].

Setup screen appears.

2 Follow the on-screen instructions and

apply the settings.



≥ You can perform this setup anytime by selecting “Easy

Setting” in the Setup menu. (> 38)

≥ If this unit is connected to a Panasonic TV (VIERA)

supporting HDAVI Control 2 or later via an HDMI cable,

then setting information on the TV such as “On-Screen

Language” is acquired by this unit.

After completing “Easy Setting”, you can perform

“Easy Network Setting”.

Select “Wired” or “Wireless” and press [OK].

∫ “Wired” connection

Follow the on-screen instructions to apply your

connection settings.

∫ “Wireless” connection

Before beginning wireless connection setup

≥ Obtain your network name (SSID*

≥

If your wireless connection is encrypted, please

be sure that you know your encryption key.

Select “Search for wireless network” or “WPS

(PUSH button)” and press [OK], then follow

the on-screen instructions and apply the

settings.

WPS (PUSH button):

If your wireless router supports

WPS (PUSH button), you can

easily perform the settings by

pressing WPS button on it.

WPS (Wi-Fi Protected Setup

) is

a standard that facilitates settings relating to the

connection and security of wireless LAN devices.

1 Press WPS button or corresponding button of

the wireless router until the lamp starts

flashing.

≥ For details, refer to the operating instruction

of the wireless router.

2 Press [OK].

Search for wireless network:

≥ When you select “Search for wireless network”,

the available wireless networks will be

displayed. Select your network name and press

[OK].

– If your network name is not displayed, search

again by pressing the red button on the

remote control.

– Stealth SSID will not be displayed when you

select “Search for wireless network”. Enter

manually by using “Manual setting”.

Press [HOME]

> select “Others” and press [OK]

> select “Setup” and press [OK]

> select “Network” and press [OK]

> select “Network Settings” and press [OK]

> select “Wireless Settings” and press [OK]

> select “Connection Setting” and press [OK]

> select “Manual setting” and press [OK]

≥ If your wireless network is encrypted,

Encryption Key input screen will be displayed.

Input the encryption key of your network.

Easy Setting

Easy Network Setting

RETURN

Easy Network Setting

Wired

Wireless

Select a connection mode.

Current setting : Wired

Wireless Settings

Select a connection method to wireless access point.

Please refer to the operating instructions of your wireless

access point about connection methods.

Search for wireless network

WPS (PUSH button)

e.g.,

SC-BTT880EB-VQT4Z42_mst.book 18 ページ２０１３年３月２１日　木曜日　午前９時４９分

Getting started

VQT4Z42



≥ Refer to the operating instructions of the hub or router.

≥ You can perform this setup anytime by selecting “Easy

Network Setting” in the Setup menu. (> 37)

≥ You can redo these settings individually using “Network

Settings”. (> 37)

≥ Do not use this unit to connect to any wireless network for

which you do not have usage rights.

During automatic searches in a wireless network

environment, wireless networks (SSID) for which you do

not have usage rights may be displayed; however, using

these networks may be regarded as illegal access.

≥ After performing network settings on this unit, the settings

(encryption level, etc.) of the wireless router might change.

When you have trouble getting online on your PC, perform

the network settings on your PC in accordance with the

settings of the wireless router.

≥ Please be aware that connecting to a network without

encryption may result in the content of the communication

being illegitimately viewed by a third party, or the leaking of

data such as personal or secret information.

SSID:

An SSID (Service Set IDentification) is a name used by

wireless LAN to identify a particular network. Transmission

is possible if the SSID matches for both devices.

The wireless router compatible with Wi-Fi Protected

Setup

may have the mark.

If you have more than one Panasonic products

and the remote control operates both products at

once, you will need to change the remote control

code to prevent this occurrence. (> 39, “Remote

Control”)

Occasionally, Panasonic may release updated

firmware for this unit that may add or improve the

way a feature operates. These updates are

available free of charge.

This unit is capable of checking the firmware

automatically when connected to the Internet via

a broadband connection.

When a new firmware version is available, the

following message is displayed.

To update the firmware

Press [HOME]

> select “Others” and press [OK]

> select “Setup” and press [OK]

> select “System” and press [OK]

> select “Firmware Update” and press [OK]

> select “Update Now” and press [OK]

DO NOT DISCONNECT the unit from the AC

power or perform any operation while the update

takes place.

After the firmware is installed, “FINISH” will be

displayed on the unit’s display. Unit will restart

and the following screen will be displayed.



≥ If downloading on this unit fails or this unit is not

connected to the Internet, then you can download the

latest firmware from the following website and burn it

to a CD-R to update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

To show the firmware version on this unit. (> 39,

“Firmware Version Information”)

≥ Downloading will require several minutes. It may take

longer or may not work properly depending on the

connection environment.

≥ If you do not want to check for the latest firmware version,

set “Automatic Update Check” to “Off”. (> 39)

Reprogramming the

remote control

Firmware updates

New firmware is available.

Please update firmware in Setup.

The firmware has been updated.

Current Version:

x.xx

RETURN

SC-BTT880EB-VQT4Z42_mst.book 19 ページ２０１３年３月２１日　木曜日　午前９時４９分

VQT4Z42

Inserting or removing

media

≥ When inserting a media item, ensure that it is

facing the right way up.

≥ When removing the SD card, press the centre

of the card and pull it straight out.

≥ If you connect a Panasonic product with a USB

connection cable, the setup screen may be

displayed on the connected equipment. For

details, refer to the instructions for the

connected equipment.

≥ Use the front USB port when you connect a

iPod/iPhone, USB memory or a USB HDD.

The USB port on the rear panel is only for the

Communication Camera.

Enjoying TV with unit’s

speakers

1 Connect the TV and the main unit. (> 14)

2 Press [EXT-IN] several times to select the

appropriate external input mode. (> 21)

≥ Reduce the volume on the TV to its

minimum, and then adjust the volume of the

main unit.

Press [AUDIO] several times to select the

audio. (M1, M2)

≥ Set “PCM-Fix” (> 36) to “Off”.

≥ Only works with Dolby Dual Mono.



≥ You cannot change the audio type when the TV is

connected to this unit via the AUX terminal.

SD CARD

VOL

OPEN/CLOSE

* (For details > 26)

Selecting the type of audio

SC-BTT880EB-VQT4Z42_mst.book 20 ページ２０１３年３月２１日　木曜日　午前９時４９分

Page is loading ...

Panasonic SCBTT880EB Owner's manual

Brand: Panasonic

Model: SCBTT880EB

Category: Home cinema systems

Type: Owner's manual

This manual is also suitable for

SC-BTT880

Download PDF

report

Panasonic SCBTT880EB Owner's manual

This manual is also suitable for

Panasonic SCBTT880EB Owner's manual

Related papers

Other documents