Nokia 810 Contact Download Application User guide
To make it compatible and get your phonebook into the carkit, you need to install a
third party software on this phone: 'Nokia 810 Contact Download' application.
How to install this software on your phone ?
You need to install it on your phone with a PC with Bluetooth connectivity (such as a
Bluetooth Dongle).
Please follow these steps :
1. Please pair your phone to the car kit and switch off your engine.
2. Launch the bluetooth manager that is provided with the Bluetooth Dongle's software.
3. Find all the bluetooth devices and select your phone.
4. Use the OBEX FILE TRANSFER feature of your phone.
5. Define a Bluetooth PIN code.
6. A window will appear on your phone, enter the same bluetooth PIN code.
7. Send The software you have downloaded to your phone. Don't forget to accept the file
transfer on your phone.
8. You will receive a message on your phone. Open it and follow the instructions. Wait
until the download is finished.
9. If the installation is successful you should find an icon with a car and a computer.
Once you have installed the specific software on your phone :
1. Please make sure your phone is paired to the car kit.
2. Switch off your car kit.
3. On your phone go to the MENU screen.
4. Select the software you have installed : the icon with a car and a computer.
5. Select the OPTIONS command.
6. Select OPEN command.
7. Select the OPTIONS command again.
8. Select OPEN command.
9. Then switch on your engine.
10. Wait until the car kit tell you the end of the synchronization.
You can now assign voice tags. Refer to the voice commands menu.
You can find more informations at http://europe.nokia.com/A4143881
-
1
