2. Gryphon
  3. PS2-S MM/MC Phono Module

Gryphon PS2-S MM/MC Phono Module User manual

  • Hello! I've reviewed the user manual for the Gryphon PS2-S Phono module. This document outlines the key specifications of the module, such as its gain options for Moving Coil (MC) and Moving Magnet (MM) cartridges, adjustable impedance settings, and signal-to-noise ratios. I'm ready to answer any questions you have about its features or setup.
  • What are the gain options for this module?
    What are the available impedance options for MC?
    What is the input impedance in MM mode?
    How is the selection between MM and MC done?
OPTIONAL PS2-S Phono module
Gain:
Moving Coil (MC)
Moving Magnet (MM)
64dB
42dB
Impedance:
Moving Coil (MC)
Moving Magnet (MM)
20, 100, 200, 499 and 806 Ohm – or custom load
47 kOhm/200pF
S/N ratio:
MC, Input 250mV, 1kHz:
MM, Input 2.5mV, 1kHz:
>72dB
>84dB
Input impedance in MC mode
Fit the desired load jumpers on pinheaders JP101 and JP301.
It is not recommend using the module in MC mode without load jumpers.
Recommended max. custom load: 1kOhm. Default factory fitted jumpers: 100 Ohm
Input impedance in MM mode
TheinputimpedanceinMMmodeis47kOhm/200pF
Switching between MM and MC
TheselectionofMCorMMismadewithjumpersJP100,JP102,JP104,JP300,JP302,andJP304
100 ohm
Load Jumper
/