2. Brainwavz
  3. Arctis Nova Pro Wireless Earpad Adapter Ring

Brainwavz Arctis Nova Pro Wireless Earpad Adapter Ring Installation guide

  • Hello! I've reviewed the user manual for the BRAINWAVZ Earpad Adapter Ring for Arctis Nova Pro Wireless. It outlines how to remove stock earpads and install the new adapter ring, which allows for use of different earpad styles. I'm ready to help answer questions you might have about this device and its installation.
  • How to remove stock earpads?
    How to install the adapter ring?
    What kind of earpads can I install after the adapter?
EARPAD ADAPTER ring FOR ARCTIS NOVA PRO WIRELESS
INSTALLation GUIDE
Remove Stock Pads
NOTE NOTE
The stock pad and
plastic mounting
ring are one piece
Wrap your fingers
firmly around the
pad, try go under
the pad to get a
stronger grip
1
Pull the earpads in a forward
and sideways motion
You may hear multiple “clicks”
as the pad releases from the
internal tab system.
2
NOTENOTE
Hold the headphones
steady during the
removal procedure.
Get To Know The Adapter Ring
Install The Adapter
NOTE:NOTE: To make installation easier we reccomend rotating the headset, so the TOP is facing
towards you.
FRONTFRONT TOPTOP BACKBACK
Place the TOP A of the adapter into
its corresponding clip first, making
sure the the key guides are lined up
with the guides on the head unit B .
With the adapter in its initial starting
position push firmly on position C
first, then a final push on position D
You will here several clicks as the
adapter fits into place.
2
Once the adapter is fitted you can
now install the earpad of your choice
from our Oval, Angled, ProStock and
SteelSeries collections.
3
1
B
A
A
There are 6
mounting holes A
on the inner edge
of the adapter,
these match the
clips on the head
unit.
There are also two
key guides B to
help position the
adapter correctly
when installing.
B
B
C
C
D
/