Insignia NS-DCR30A2 Quick setup guide

Insignia
Brand
Insignia
Model
NS-DCR30A2
Category
External hard drives
Type
Quick setup guide

This manual is also suitable for

USB cable
CF*
LED indicators
MS
Flat size (W×H): 203.2 × 152.4 mm.
Final folded size: 101.6 × 152.4 mm.
microSDM2
SD/MMC*
USB cable port
Front view
Back view
*Insert card into this slot label side down.
CONNECTING THE CARD READER
Plug one end of the USB cable into the card reader and the other end
into an available USB port on your computer. Your computer loads the
drivers automatically.
PACKAGE CONTENTS
• USB 3.0 multi-format memory card reader
• USB 3.0 cable
• Quick Setup Guide
SYSTEM REQUIREMENTS
• Windows® 8.1, Windows® 8, Windows® 7, Windows Vista®,
Windows® XP, or Mac OS 10.4.x or higher
FEATURES
• Easily transfer music, photos, video, and other les between your
computer and a digital camera/camcorder, action camera,
smartphone, tablet, or similar device
• Supports SD, SDHC, SDXC, microSD, microSDHC, microSDXC, MMC,
MemoryStick, MS PRO, MS-Duo, MS PRO Duo, MS PRO-HG Duo,
MemoryStick Micro (M2), and CompactFlash types I and II cards
• Supports MMC plus or MINI SD with adapter. Adapters not
included.
• USB 3.0 Super Speed for up to 5 Gbps data transfer, complies with
USB 2.0
Before using your new product, please read these instructions to prevent any damage.
Quick Setup Guide
I
NS-DCR30A2/NS-DCR30A2-C
USB 3.0 Multi-Format Memory Card Reader
NS-DCR30A2_NS-DCR30A2-C_15-0447_QSG_V2_EN.ai 1 6/1/2015 3:44:20 PMNS-DCR30A2_NS-DCR30A2-C_15-0447_QSG_V2_EN.ai 1 6/1/2015 3:44:20 PM
USING THE CARD READER
Cautions:
• Insert a card into the appropriate slot, label side up (except for CF and
SD/MMC slots, which require that cards be inserted label side DOWN). The
data LED lights. Failure to do so may result in damage to your card and/or
card reader.
• Do not remove memory cards while the blue or green data LED on the
reader is ashing. Doing so may lead to loss of data or damage to your
memory card.
• This card reader supports multiple cards at the same time, such as
CF+MS+SD+microSD or CF+MS+SD+M2. It does not support microSD and
M2 cards at the same time.
If you connect this card reader to a USB 2.0 port, the green LED lights.
When you transfer data over USB 2.0, the green LED blinks. If you
connect this card reader to a USB 3.0 port, the blue LED lights. When
you transfer data over USB 3.0, the blue LED blinks.
To access a memory card using Windows:
1 Insert a card into the appropriate slot, label side up (except for CF
and SD/MMC slots, which require that cards be inserted label side
DOWN). The data LED lights.
2 Click Start, then click My Computer/Computer. Double-click the
drive letter to see its contents.
3 Use normal Windows procedures to open, copy, paste, and delete
les.
4 Right-click the name of your card and select Eject when you are
nished.
5 Do not remove your card from the card reader until the data LED
stops blinking and the name of your card disappears from the
window.
To access a memory card using Mac OS 10.4.x or higher:
1 Insert a card into the appropriate slot, label side up (except for CF
and SD/MMC slots, which require that cards be inserted label side
DOWN). The data LED lights.
2 Open the Finder window, then click your card’s name in the left
menu to view its contents.
3 Use normal Mac procedures to open, copy, paste, and delete les.
4 Right-click the name of your card and select the Eject when you
are nished.
5 Do not remove your card from the card reader until the data LED
stops blinking and the name of your card disappears from the Finder
window.
TROUBLESHOOTING
For troubleshooting help, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
LEGAL NOTICES
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
ICES-003 statement
CAN ICES‐3 (B)/NMB‐3(B)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China
V2 ENGLISH 15-0447
NS-DCR30A2_NS-DCR30A2-C_15-0447_QSG_V2_EN.ai 2 6/1/2015 3:44:20 PMNS-DCR30A2_NS-DCR30A2-C_15-0447_QSG_V2_EN.ai 2 6/1/2015 3:44:20 PM
  • Page 1 1
  • Page 2 2

Insignia NS-DCR30A2 Quick setup guide

Insignia
Brand
Insignia
Model
NS-DCR30A2
Category
External hard drives
Type
Quick setup guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents