Side view
Caution: All cards must be inserted into the card reader label
side up. Failure to do so could result in damage to the
memory card or the card reader. Do not force a memory card
into the card reader.
CONNECTING THE CARD READER
Plug the USB connector of the card reader into an
available USB port on your computer. Your computer
loads the drivers automatically.
USING THE CARD READER
Cautions:
• Insert a card, label side up, into the appropriate slot. Failure
to do so may result in damage to your card and/or card
reader.
• This card reader can’t support inserting both cards
(microSD and SD card) at the same time.
To access a memory card using Windows:
1 Insert a card, label side up, into the appropriate slot.
2 Click Start, then click My Computer/Computer.
Double-click the drive letter to see its contents.
PACKAGE CONTENTS
• USB 3.0 multi-format memory card reader
• Quick Setup Guide
SYSTEM REQUIREMENTS
• Windows® 10, Windows® 8.1, Windows® 8, Windows® 7,
Windows Vista®, Mac OS 9.0 or higher, or Linux Kernal
2.4.1 or above
FEATURES
• Supports USB 3.0 and below
• Multi-port and single-driver letter display
• Plug & Play
• Works with the following card formats:
Micro SD/T-FLASH/Micro SDXC/Micro SDHC,
SD/SDHC/SDXC/Mini-SD
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Memory Card
Reader
NSDCR30S2K
Flat size (W×H): 165.1 × 139 mm.
Final folded size: 82.55 × 139 mm.
microSD
Insert label
side up.
SD card
Insert label side up.
USB
NS-DCR30S2K_16-1143_QSG_V1_EN.ai 1 3/16/2017 5:38:50 PMNS-DCR30S2K_16-1143_QSG_V1_EN.ai 1 3/16/2017 5:38:50 PM
3 Use normal Windows procedures to open, copy,
paste, and delete les.
4 Right-click the name of your card and select Eject
when you are nished.
5 Do not remove your card from the card reader until
the name of your card disappears from the window.
To access a memory card using Mac OS 9.0 or
higher:
1 Insert a card, label side up, into the appropriate slot.
2 Open the Finder window, then click your card’s name
in the left menu to view its contents.
3 Use normal Mac procedures to open, copy, paste, and
delete les.
4 Right-click the name of your card and select Eject
when you are nished.
5 Do not remove your card from the card reader until
the name of your card disappears from the Finder
window.
SPECIFICATIONS
• Dimensions (not including the rubber belt loop):
2.48 × .94 × .47 in. (6.3 × 2.4 × 1.2 cm)
• Transmission port: USB 3.0
• Transmission rate: 5.0 Gbps (MAX)
• Operating temperature: 32~122°F (0~50°C)
• Operating humidity: 20% RH ~ 85% RH C
TROUBLESHOOTING
For troubleshooting help, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
LEGAL NOTICES
FCC Information
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
ICES-003 statement
CAN ICES‐3 (B)/NMB‐3(B)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 16-1143
NS-DCR30S2K_16-1143_QSG_V1_EN.ai 2 3/16/2017 5:38:58 PMNS-DCR30S2K_16-1143_QSG_V1_EN.ai 2 3/16/2017 5:38:58 PM
/