Wincor Nixdorf TA64 Operating instructions
- Category
- Keyboards
- Type
- Operating instructions
TA64
POS Keyboard
User Guide
Edition February 2000
MS-DOS is a registered trademark of the Microsoft Corporation
BEETLE® is a registered trademark of the Wincor Nixdorf GmbH
Copyright © Wincor Nixdorf GmbH & Co. KG, 2000
The reproduction, transmission or use of this document or its contents is not permitted
without express authority.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design, are reserved.
Delivery subject to availability; technical modifications possible.
Contents
Manufacturer’s Declaration and Approval................................. 1
FCC-Class A Declaration ............................................................................1
Important notes............................................................................................2
Cleaning instructions ...................................................................................2
Scope of supply ...........................................................................................3
The TA64 keyboard ...................................................................... 4
General........................................................................................................4
Keypad.........................................................................................................5
Waiter keylock .............................................................................................5
Central keylock ............................................................................................6
Swipecard reader (SCR) .............................................................................7
Using the swipecard reader.......................................................................7
Connection method......................................................................................8
Self-test........................................................................................................8
Software.......................................................................................................8
Appendix....................................................................................... 9
Technical data .............................................................................................9
User information
Manufacturer’s Declaration and Approval
This device fulfills the requirements of the EEC directives
89/336/EEC “Electromagnetic Compatibility” and
73/23/EEC “Low Voltage Directive”. Therefore, you will
find the CE mark on the device or packaging.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interfe-
rence at his own expense.
Le présent appareil numérique ne fait pas de bruits radioélectriques dépas-
sant les limites applicables aux appareils numériques de la “Classe A”
prescrites dans le Règlement sur le brouillage radioélectrique édicté par le
ministère des Communications du Canada.
User information
GB - 1
Important notes
Important notes
Note the following safety information:
■ Never plug in or unplug data communication lines during a thunder-
storm.
■ Protect the keyboard from moisture, dust and heat.
■ Place the keyboard on a non-slip surface.
■ The keyboard may be repaired by authorized qualified personnel
only. Unauthorized opening of the device or inexpertly carried-out re-
pairs may seriously jeopardize the safety of the user and cancels all
warranty and liability agreements.
Cleaning instructions
Cleaning instructions
Clean the keyboard using a slightly moistened cloth.
Make sure no moisture penetrates the spaces between keys.
Important notes User information
GB - 2
Scope of supply
The product includes one TA64 keyboard with a non-removable connecting
cable, one User Guide and one set of keys.
The set of keys contains:
Key 1 for key position 1
Key 2 for key positions 1 and 2
Key 3 for key positions 1, 2 and 3
Key 4 for key positions 1, 2, 3 and 4
The following items can be ordered optionally:
■ Swipecard reader (SCR)
■ Waiter keylock
■ Template for key labelling
■ Extension cable (2 m)
If damage has occurred during shipping or if the package contents do not
match the delivery note, promptly notify your Wincor Nixdorf sales outlet.Scope of supply
User information Scope of supply
GB - 3
The TA64 keyboard
The TA64 keyboard
General
General
The TA64 POS keyboard can be used wherever keyboards are exposed
to difficult environmental conditions such as liquids, grease, dust, etc. It is
therefore e.g. well suited to the catering sectore.
The keyboard can be connected to all BEETLE models via the standard
keyboard interface.In addition to the central keylock, a waiter keylock is op-
tionally available.A further option is the integrated swipecard reader.
TA64 keyboard with swipecard reader
General The TA64 keyboard
GB - 4
Keypad
Keypad
The keypad on the TA64 comprises 125 keys, 112 of which are freely
programmable.The transparent keyboard cover which you can lift allows
you to use exchangeable keyboard templates.These keyboard templates
can be labelled to meet customer-specific requirements.
TA64 with transparent keyboard cover
Waiter keylock
A WKL (waiter keylock) is optionally available and is connected at the right
side of the keyboard.
The TA64 keyboard Keypad
GB - 5
Central keylock
Centralkeylock
The central keylock has a total of 6 switch positions.
Switch position 0 is
the basic position;
switch positions 1-4
are provided for cu-
stomer-specific appli-
cations. In positions
0 and 1, the key can
be removed.
Switch position 6, which is designated on the lock by T, is intended for use
by Field Engineering. From switch position 0, the key provided can be
turned to position T only.This key is not included in the scope of supply.
The central keylock has only one tumbler arrangement, i.e.there is only
one set of keys for all keylocks with the above-mentioned key variants for
the various switch positions.
Central keylock The TA64 keyboard
GB - 6
Swipecard reader (SCR)
The optionally available 3-track swipecard reader is equipped with three in-
dividually installed magnetic heads, i.e.three ISO tracks can be read simul-
taneously when the card is pulled once through the slot.
Using the swipecard reader
Pull the magnetic card evenly and quickly, from right to left, through the
slot on the swipecard reader.Make sure that the magnetic stripe is facing
the keys.
Note the following precautions when handling magnetic cards:
■ Never allow magnetic cards to come into contact with liquids.
■ Never bend or fold magnetic cards.
■ Never expose magnetic cards to a magnetic field.
■ Insert the magnetic card in the special slot provided on the reader
from the right-hand side only; inserting the card at another location
could damage the read heads.
■ In order to ensure that the quality of reading results is maintained, cle-
an the swipecard reader at least once a week. To do this, use the spe-
cial cleaning card that can be ordered from Wincor Nixdorf GmbH.
Swipecard reader (SCR)
The TA64 keyboard Swipecard reader (SCR)
GB - 7
Connection method
Connectionmethod
The connector for the
keyboard is a
standard 6-pin mini-
DIN connector. The
cable is 1 meter long.
A 2-meter extension
cable is optionally
available.
Self-test
Self-test
A brief self-test of the keyboard is performed each time the system is swit-
ched on. Data cannot be transmitted during this test. The system is infor-
med of the successful completion of the test.
Software
The connection of this keyboard on the software level is by means of the
Retail Device Interface (RDI, Version 3.2 or higher) and Retail Presentati-
on Manager (RPM) program packages.
Connection method The TA64 keyboard
GB - 8
Appendix
Appendix
Technical data
Technical data
Housing dimensions
Footprint 280 mm * 284 mm
Height 59 mm
Weight 1.1 kg
Cable length 1 m
2-m extension cable
Power supply 5 V DC +/- 10%, max. 300 mA
Connection Mini-DIN connector (6-pin)
Keypad
- Key mechanism Mechanical contacts
- Number of keys 125, 112 of which are freely
programmable
- Key matrix 12 x 11 keys
- Key grid Horizontal - 20 mm; vertical - 15 mm
- Key stroke Short-stroke keys
Central keylock
Switch positions 5, plus insertion position
Protocol PC/AT keyboard Interface
Swipecard reader
Number of tracks 3
Magnetic card coding To ISO 3554
Climatic Category IEC 721-3-3 Class 3K3
Appendix Technical data
GB - 9
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Wincor Nixdorf TA64 Operating instructions
- Category
- Keyboards
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Wincor Nixdorf POS Keyboard TA61 User manual
-
-
Wincor Nixdorf POS Keyboard TA61 User manual
-
Wincor Nixdorf BEETLE /20 User manual
-
-
-
-
-
-
