Wincor Nixdorf TA64 Operating instructions

Brand: Wincor Nixdorf

Model: TA64

Category: Keyboards

Type: Operating instructions

TA64

POS Keyboard

User Guide

Edition February 2000

MS-DOS is a registered trademark of the Microsoft Corporation

BEETLE® is a registered trademark of the Wincor Nixdorf GmbH

The reproduction, transmission or use of this document or its contents is not permitted

without express authority.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model or design, are reserved.

Delivery subject to availability; technical modifications possible.

Contents

Manufacturer’s Declaration and Approval................................. 1

FCC-Class A Declaration ............................................................................1

Important notes............................................................................................2

Cleaning instructions ...................................................................................2

Scope of supply ...........................................................................................3

The TA64 keyboard ...................................................................... 4

General........................................................................................................4

Keypad.........................................................................................................5

Waiter keylock .............................................................................................5

Central keylock ............................................................................................6

Swipecard reader (SCR) .............................................................................7

Using the swipecard reader.......................................................................7

Connection method......................................................................................8

Self-test........................................................................................................8

Software.......................................................................................................8

Appendix....................................................................................... 9

Technical data .............................................................................................9

User information

Manufacturer’s Declaration and Approval

This device fulfills the requirements of the EEC directives

89/336/EEC “Electromagnetic Compatibility” and

73/23/EEC “Low Voltage Directive”. Therefore, you will

find the CE mark on the device or packaging.

FCC-Class A Declaration

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules.These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interfe-

rence at his own expense.

Le présent appareil numérique ne fait pas de bruits radioélectriques dépas-

sant les limites applicables aux appareils numériques de la “Classe A”

prescrites dans le Règlement sur le brouillage radioélectrique édicté par le

ministère des Communications du Canada.

User information

GB - 1

Important notes

Note the following safety information:

■ Never plug in or unplug data communication lines during a thunder-

storm.

■ Protect the keyboard from moisture, dust and heat.

■ Place the keyboard on a non-slip surface.

■ The keyboard may be repaired by authorized qualified personnel

only. Unauthorized opening of the device or inexpertly carried-out re-

pairs may seriously jeopardize the safety of the user and cancels all

warranty and liability agreements.

Cleaning instructions

Clean the keyboard using a slightly moistened cloth.

Make sure no moisture penetrates the spaces between keys.

Important notes User information

GB - 2

Scope of supply

The product includes one TA64 keyboard with a non-removable connecting

cable, one User Guide and one set of keys.

The set of keys contains:

Key 1 for key position 1

Key 2 for key positions 1 and 2

Key 3 for key positions 1, 2 and 3

Key 4 for key positions 1, 2, 3 and 4

The following items can be ordered optionally:

■ Swipecard reader (SCR)

■ Waiter keylock

■ Template for key labelling

■ Extension cable (2 m)

If damage has occurred during shipping or if the package contents do not

match the delivery note, promptly notify your Wincor Nixdorf sales outlet.Scope of supply

User information Scope of supply

GB - 3

The TA64 keyboard

General

The TA64 POS keyboard can be used wherever keyboards are exposed

to difficult environmental conditions such as liquids, grease, dust, etc. It is

therefore e.g. well suited to the catering sectore.

The keyboard can be connected to all BEETLE models via the standard

keyboard interface.In addition to the central keylock, a waiter keylock is op-

tionally available.A further option is the integrated swipecard reader.

TA64 keyboard with swipecard reader

General The TA64 keyboard

GB - 4

Keypad

The keypad on the TA64 comprises 125 keys, 112 of which are freely

programmable.The transparent keyboard cover which you can lift allows

you to use exchangeable keyboard templates.These keyboard templates

can be labelled to meet customer-specific requirements.

TA64 with transparent keyboard cover

Waiter keylock

A WKL (waiter keylock) is optionally available and is connected at the right

side of the keyboard.

The TA64 keyboard Keypad

GB - 5

Central keylock

Centralkeylock

The central keylock has a total of 6 switch positions.

Switch position 0 is

the basic position;

switch positions 1-4

are provided for cu-

stomer-specific appli-

cations. In positions

0 and 1, the key can

be removed.

Switch position 6, which is designated on the lock by T, is intended for use

by Field Engineering. From switch position 0, the key provided can be

turned to position T only.This key is not included in the scope of supply.

The central keylock has only one tumbler arrangement, i.e.there is only

one set of keys for all keylocks with the above-mentioned key variants for

the various switch positions.

Central keylock The TA64 keyboard

GB - 6

Swipecard reader (SCR)

The optionally available 3-track swipecard reader is equipped with three in-

dividually installed magnetic heads, i.e.three ISO tracks can be read simul-

taneously when the card is pulled once through the slot.

Using the swipecard reader

Pull the magnetic card evenly and quickly, from right to left, through the

slot on the swipecard reader.Make sure that the magnetic stripe is facing

the keys.

Note the following precautions when handling magnetic cards:

■ Never allow magnetic cards to come into contact with liquids.

■ Never bend or fold magnetic cards.

■ Never expose magnetic cards to a magnetic field.

■ Insert the magnetic card in the special slot provided on the reader

from the right-hand side only; inserting the card at another location

could damage the read heads.

■ In order to ensure that the quality of reading results is maintained, cle-

an the swipecard reader at least once a week. To do this, use the spe-

cial cleaning card that can be ordered from Wincor Nixdorf GmbH.

Swipecard reader (SCR)

The TA64 keyboard Swipecard reader (SCR)

GB - 7

Connection method

Connectionmethod

The connector for the

keyboard is a

standard 6-pin mini-

DIN connector. The

cable is 1 meter long.

A 2-meter extension

cable is optionally

available.

Self-test

A brief self-test of the keyboard is performed each time the system is swit-

ched on. Data cannot be transmitted during this test. The system is infor-

med of the successful completion of the test.

Software

The connection of this keyboard on the software level is by means of the

Retail Device Interface (RDI, Version 3.2 or higher) and Retail Presentati-

on Manager (RPM) program packages.

Connection method The TA64 keyboard

GB - 8

Appendix

Technical data

Housing dimensions

Footprint 280 mm * 284 mm

Height 59 mm

Weight 1.1 kg

Cable length 1 m

2-m extension cable

Power supply 5 V DC +/- 10%, max. 300 mA

Connection Mini-DIN connector (6-pin)

Keypad

- Key mechanism Mechanical contacts

- Number of keys 125, 112 of which are freely

programmable

- Key matrix 12 x 11 keys

- Key grid Horizontal - 20 mm; vertical - 15 mm

- Key stroke Short-stroke keys

Central keylock

Switch positions 5, plus insertion position

Protocol PC/AT keyboard Interface

Swipecard reader

Number of tracks 3

Magnetic card coding To ISO 3554

Climatic Category IEC 721-3-3 Class 3K3

Appendix Technical data

GB - 9

Page is loading ...

Wincor Nixdorf TA64 Operating instructions

Brand: Wincor Nixdorf

Model: TA64

Category: Keyboards

Type: Operating instructions

Download PDF

report

Wincor Nixdorf TA64 Operating instructions

Wincor Nixdorf TA64 Operating instructions

Related papers

Other documents