Whirlpool AWT 8124D Program Chart

Brand: Whirlpool

Model: AWT 8124D

Category: Washing machines

Type: Program Chart

Whirlpool AWT 8124D is a washing machine with a variety of features to make your laundry day easier. It has 12 different programs to choose from, depending on the type of fabric you are washing and how soiled it is. The programs include Cotton, Mixed Cotton/Synthetic, Synthetic, 30 min / 30° C, Delicate, Wool, Silk, Rinse / Spin, Drain, Long Spin, and Gentle Spin. The machine also has a number of options, including Prewash, Intensive Rinse, Rinse Hold, and Start Delay. With its large 5kg capacity, you can wash a lot of laundry at once, saving you time and energy.

5019 100 12660

Cotton

Mixed Cotton/Synthetic

Rinse

Spin

Synthetic

30 min / 30° C

Delicate

Silk

Off Position

Wool

Drain

Cold

Intensive Rinse Option

Rinse Hold Option

Prewash Option

Start Delay Option

Water Tap

Start button

Programme Type of fabrics / Degree of soiling / Notes Max.

Load

Detergent and Additives Options Temperature

Selector

°C

Maximum

Technical

Spin

Speed

rpm/min

Recommended

Spin Speed

rpm/min

Programme

Duration

approx.

min 1)

Pre-

wash

Wash Softener Intensive

Rinse

Hold

Pre-

wash

Start

Delay

Cotton

Averagely soiled, hard wearing and temperature

stable textiles in cotton and linen (bed linen, table

linen, underwear, shirts etc.). The max load for

heavily soiled laundry is 3.5 Kg.

5.0 Yes Yes

❉❉❉❉❉

Cold to 90 1200 1200 120

Mixed

Cotton /

Synthetic

Averagely soiled, long wearing and temperature stable

textiles in cotton and linen (bed linen, table linen,

underwear, shirts, etc.).

5.0 Yes Yes

❉❉❉❉❉

Cold to 60 1200 1000 to 1200 120

Synthetic

Lightly or averagely soiled blouses, shirts, etc. made

of polyester (Diolen, Trevira), polyamide (Perlon,

Nylon) or cotton blends.

2.5 Yes Yes

❉❉❉❉❉

Cold to 60 1000 600 to 800 100

30 min / 30° C

Lightly soiled cotton, cotton blends, synthetic and

delicate.

3.0 — Yes

❉

—

❉

—

❉

30 1200 600 to 800 30

Delicate

Delicate curtains, dresses, skirts and blouses. 1.5 Yes Yes

❉

—

❉❉❉

Cold to 40 1000 100 to 500 60

Wool

Only machine washable woollens with pure new wool

label. If you select the special function “Rinse Hold” do

not leave garments to soak for too long.

1.0 — Yes

❉

—

❉

—

❉

Cold to 40 1000 100 to 500 40

Silk

Silk and other extra delicate textiles, which are

labelled with “Handwash”.No spin, drain only.

1.0 — Yes

❉

—

❉

—

❉

Cold to 30 — — 40

Rinse / Spin

Programme for treating wash with softener.

Terminates with an intensive spin cycle.

5.0 — —

❉

—

❉

—

❉

— 1200 1000 to 1200 20

Long Spin

Programme for intensive spin cycle. 5.0 — — — — — —

❉

— 1200 1000 to 1200 10

Spin

Programme for gentle spin cycle. 1.5 — — — — — —

❉

— 1000 100 to 800 5

Drain

Drain only, without spin cycle. Alternative way of

terminating programmes with “Rinse Hold” setting.

———— ———

❉

—— — 3

PROGRAMME TABLE

AW 8124 D

1) Programme duration

figures (guideline) are

valid for maximum

temperature wash with no

special functions.

N.B. This appliance is controlled by sensors. The excess of detergent in the dispenser could cause technical problems.

5019 100 12660

Prewash cycle increases programme duration by approx. 15 minutes. Consumption values were measured in normalized

conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the

table in relation to the water supply pressure and temperature, the load and the type of wash.

* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the

water out.

ADDING DETERGENT AND ADDITIVES

Add the detergent and the additives into the chamber as follows:

• Programme with pre- and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Stain remover agents

• Anti-scale agents (water hardness 4)

Important:

• Be careful not to fill more than the

“MAX”

level mark.

• For programme with prewash: do not use liquid detergents.

• For programmes without prewash from cold to 40° C it is

recommended to use a liquid detergent to avoid whitish residues

on the coloured laundry.

CLOSE THE DOOR AND SELECT THE PROGRAMME

1. Turn the

programme selector knob

clockwise to the desired programme.

2. The remaining time indication lights up and the Start button “ ” is flashing.

3. Turn the

temperature knob

to the required temperature.

4. Turn the

spin speed selector

to the required setting.

PRESS ANY DESIRED OPTION BUTTON(S).

The pilot lamp lights up.

Intensive Rinse button “ ”

• For improved rinsing efficiency the rinse water level and the cycle time are increased.

• This option is particularly suitable for areas with very soft water washing baby linen and helps people

with allergies.

Rinse Hold button “ ”

• The laundry remains in the last rinse water without progressing to the spin cycle to avoid creasing

and prevent colours from changing.

• This option is particularly recommended for the programmes Synthetic “ ” or Delicate “ ”.

• This function is particularly useful if you want to postpone spinning to a later time or when you do not

wish to spin the clothes.

Note:

The programme is stopped in “Rinse Hold” at the time the Rinse Hold button “ ” flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the spin cycle

to the present wash programme.

• If you do not wish to spin the clothes, turn the programme knob to the drain programme “ ” and

push the Start button “ ”.

Prewash button “ ”

• Only for heavily soiled loads (for example sand, granular dirt) sensible.

• The cycle time increases from 5 to 15 min.

Start Delay button “ ”

• Select the programme and the option (if necessary). The remaining time indication lights up.

• Press the Start Delay button “ ” to select the delay time by 2, 4, 6, 8 hours.

• Press the Start button “ ”. The Start Delay “ ” light flashes until the programme starts.

• The number of hours preselected can later be reduced pressing again the Start Delay “ ” button.

To cancel the Start Delay “ ” option:

• Turn the programme selector the “0” position.

PROGRAMME START

Open the tap and press the Start button “ ”.

DOOR LOCK

During the running programmes the door can be opened for adding further laundry.

The door locks automatically in all spinning cycles. If the programme is stopped or the electrical power

supply is terminated, the door lock will open after approximately 1 minute.

Note:

If you open the door during the programme, the Start button “ ” is flashing.

Press it again continue the cycle.

PROGRAMME END

• The rest time display is on “Stop”.

1. Turn the programme selector to the “ ” position.

2. Turn the water supply tap off.

3. Open the door and the drum flaps and unload the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER

PROGRAMME START

1. Press the Start button “ ” to pause the programme. The light flashes.

2. Select the new programme, temperature, spin speed and options.

3. Press the Start button “ ” to start the programme again.

TO STOP, RESET A PROGRAMME BEFORE THE END

1. Press the Start button “ ” to pause the programme. The light flashes.

2. Set the programme selector to Drain “ ”.

3. Press the Start button “ ” to start the drain programme.

The door is unlocked as soon as the rest time display is on “Stop”.

AUTOMATIC SAFETY FUNCTIONS / FAULTS

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an

early stage and react appropriately. Often, however, the faults detected are small enough to be solved in a

matter of minutes. For example:

• The washing machine will not start.

• The additive products are not being fully washed out of the detergent dispenser.

• The washing machine is unstable during the spin cycle.

• The washing machine does not spin at the end of the programme.

Information about the above problem can be found in the “Troubleshooting Guide”.

What should I do when the automatic safety detects a malfunction?

The programme is interrupted and the fault is indicated as follows:

CONSUMPTION DATA

Programme

Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Programme

Duration

(min)

Cotton 90 5.0 49 1.6 120

Cotton 60 5.0 48 0.95 120

Mixed Cotton / Synthetic 60 2.0 54 0.7 120

Synthetic 40 2.0 50 0.5 80

30 min / 30° C 30 3.0 35 0.4 30

Delicate 40 1.5 50 0.5 45

Wool 40 1.0 50 0.5 45

Silk 30 1.0 35 0.4 30

Indicators flashing Solution

Remaining time indication and water tap .

See “No or insufficient water supply”.

Remaining time indication Other faults (see troubleshooting guide)

Whirlpool AWT 8124D Program Chart

Brand: Whirlpool

Model: AWT 8124D

Category: Washing machines

Type: Program Chart

Download PDF

report

Whirlpool AWT 8124D Program Chart

Whirlpool AWT 8124D Program Chart

Related papers

Other documents