Allen + Roth B10048 Installation guide

Type
Installation guide

Allen + Roth B10048 is a stylish and easy-to-install mini pendant that provides ample lighting for a variety of spaces. It's perfect for kitchens, dining rooms, bedrooms, and more. The canopy has a compression fitting that allows you to adjust the hanging height of the cord, so you can customize it to your needs. The included glass shade adds a touch of elegance to any space. Installation is simple, as the mounting bracket connects to the outlet box with short machine screws.

Allen + Roth B10048 is a stylish and easy-to-install mini pendant that provides ample lighting for a variety of spaces. It's perfect for kitchens, dining rooms, bedrooms, and more. The canopy has a compression fitting that allows you to adjust the hanging height of the cord, so you can customize it to your needs. The included glass shade adds a touch of elegance to any space. Installation is simple, as the mounting bracket connects to the outlet box with short machine screws.

1
Lowes.com/allenandroth
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.
ATTACH YOUR RECEIPT HERE
EB14110
MINI PENDANT
Français p. 9
Español p. 17
ITEM #0669149
MODEL #B10048
welcoming • sophisticated • inspiring
allen + roth
®
is a registered trademark
of LF, LLC. All Rights Reserved.
2
Lowes.com/allenandroth
PACKAGE CONTENTS
A Canopy 1
Mounting Bracket 1
Glass Holder (preassembled to Cord (E)) 1
Glass Shade 1
Cord (preassembled to Canopy (A)) 1
Socket (preassembled to Cord (E)) 1
Compression Fitting (preassembled to Canopy (A)) 1
B
C
D
E
F
G
PART DESCRIPTION QUANTITY
A
B
D
F
C
G
E
3
Lowes.com/allenandroth
HARDWARE CONTENTS (shown actual size)
Wire
Connector
AA
Short
Machine
Screw
BB
CC
Qty: 3
Qty: 2
Threaded
Knob
Qty: 2
DD
Long
Machine
Screw
Qty: 2
EE
Lock
Washer
Qty: 2
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
IMPORTANT: NEVER attempt any work without shutting off the electricity.
Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the
circuit breaker switch(es), that control the power to the fixture or room you are working in.
Place the wall switch in the "OFF" position. If the fixture to be replaced has a switch or pull chain,
place it in the "OFF" position.
Do not use bulbs with wattage greater than specified on this fixture.
California Proposition 65
WARNING: This product can expose you to lead, which is known to the State of
California to cause cancer, birth defects or other reproductive harm. For more
information go to www.p65warnings.ca.gov
CAUTION
If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate
completely, please contact a licensed electrical contractor.
All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts
out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate
ETL listing and/or C.S.A. certification of this fixture.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated assembly time: 30 minutes to 1 hour
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,
electrical tape, ladder, safety glasses.
4
Lowes.com/allenandroth
ASSEMBLY INSTRUCTIONS
A
1
E
G
2
DD
Outlet Box
B
BB
Short Machine
Screw
Long Machine
Screw
x 2
x 2
BB
DD
Hardware Used
1. The hanging length of the cord (E) for this
fixture is adjustable. Hold the canopy (A) up
against the ceiling and determine the desired
length for the cord (E) before the fixture is
assembled.
Loosen the compression fitting (G) to release
the cord (E) as needed to achieve the desired
height. Then, screw the compression fitting (G)
back into place to secure cord (E).
Set fixture aside for now.
2. Orient the mounting bracket (B) so the raised
center portion protrudes into the outlet box (not
included). Connect the mounting bracket (B) to
the outlet box with short machine screws (BB).
Note: The preassembled screws on mounting
bracket (B) should protrude outward.
Lowes.com/allenandroth
Hardware Used
x 3Wire Connector
AA
3. Wire connection guide:
Ground wire:
For installation in the United States: Wrap
ground wire from outlet box around ground
screw on mounting bracket (B) no less than 2
in. from wire end. Tighten ground screw. If
fixture is supplied with a ground wire,
connect to outlet ground wire with a wire
connector (AA).
For installation in Canada: If fixture is
supplied with ground wire, wrap ground wire
around ground screw on mounting bracket
(B). Tighten ground screw.
Supply wires:
Connect the Neutral (White) supply wire from
the outlet box to the Neutral fixture wire
(White or Parallel Cord “D” shaped and
ribbed).
Connect the Hot (Black) supply wire from the
outlet box to the Hot fixture wire (Black or
Parallel Cord round and smooth).
NOTE:
Fixture will have 2 wires either Black and
White or Parallel Cord SVT lamp wire with
one round smooth wire and one “D” shaped
ribbed wire.
3
BARE COPPER,
OR GREEN
GROUND
SUPPLY WIRE
BARE COPPER,
OR GREEN
GROUND
FIXTURE
WIRE
BLACK FIXTURE
WIRE
OR
WHITE FIXTURE
WIRE
BLACK SUPPLY
WIRE
BLACK SUPPLY
WIRE
PARALLEL
FIXTURE CORD
(ROUND AND
SMOOTH)
PARALLEL FIXTURE
CORD(“D” SHAPED
AND RIDGED
)
WHITE SUPPLY
WIRE
WHITE SUPPLY
WIRE
ASSEMBLY INSTRUCTIONS
5
x 2
CC
Threaded
Knob
Hardware Used
x 2
EE
Lock
Washer
4. Pass canopy (A) over the long
machine screws (DD) protruding from the
mounting bracket (B) and secure in place
with lock washers (EE) and threaded
knobs (CC).
A
CC
DD
B
4
EE
Lowes.com/allenandroth
6
ASSEMBLY INSTRUCTIONS
5. Insert bulb (not included) into socket (F).
5
F
6
D
C
6. Screw glass shade (D) into glass
holder (C).
WARRANTY
Distributor warrants products manufactured by it will be free from defects in material and
workmanship for one (1) year following the date of shipment. This warranty does not cover bulbs or
finish on outdoor product. If any of the warranted products are found by Distributor to be defective,
such products will, at Distributor’s option, be replaced or repaired at Distributors cost. The parties
hereto expressly agree that Buyer’s sole and exclusive remedy against the Distributor shall be for the
repair or replacement of defective products as provided herein, or, at the Distributor’s sole option,
Distributor may refund the purchase price of the products. THE FOREGOING WARRANTY IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THOSE OF
MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR INFRINGEMENT. No
affirmation of Distributor, by words or action, other than set forth in this paragraph shall constitute a
warranty. Goods which may be sold by Distributor but which are not manufactured by Distributor are
not warranted by Distributor, but are sold only with the warranties, if any, of the manufacturer thereof.
This warranty does not cover labor or other costs or expenses to remove or install any defective,
repaired or replaced product. Distributor’s warranty does not apply to any products that have been
subjected to misuse, mishandling, misapplication, neglect (including, but not limited to improper
maintenance), accident, improper installation, modification (including, but not limited to use of
unauthorized parts or attachments), or adjustment or repair.
7
TROUBLESHOOTING
Fixture does not light. 1. Fixture may be wired incorrectly.
1. Check wiring.
2. Worn or broken bulb. 2. Replace bulb.
1. Check wiring.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
• Always be certain that electric current is turned off before cleaning this item.
• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on
fixture, as it will damage the metal finish.
• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not
wash shades in an automatic dishwasher.
• Bulb Replacement: Use 60-watt max. medium-base incandescent bulbs or a halogen/CFL/LED
equivalent.
CARE AND MAINTENANCE
Lowes.com/allenandroth
8
B
D
AA
BB
CC
DD
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m.,
EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.
Mounting Bracket XBAR01
Glass Shade GSB10005
Wire Connector WC001
Short Machine Screw SCR832X050
Threaded Knob TK1SMX832-BN
Long Machine Screw SCR832X150
PART DESCRIPTION PART #
Printed in China
allen + roth
®
is a registered trademark
of LF, LLC. All rights reserved.
AADB
BB
CC
DD
GND
Rev. 04-21-20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Allen + Roth B10048 Installation guide

Type
Installation guide

Allen + Roth B10048 is a stylish and easy-to-install mini pendant that provides ample lighting for a variety of spaces. It's perfect for kitchens, dining rooms, bedrooms, and more. The canopy has a compression fitting that allows you to adjust the hanging height of the cord, so you can customize it to your needs. The included glass shade adds a touch of elegance to any space. Installation is simple, as the mounting bracket connects to the outlet box with short machine screws.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI